Unit 5 Chemical Reactions When chemical reactions occur

  • Slides: 63
Download presentation
Unit 5: Chemical Reactions

Unit 5: Chemical Reactions

When chemical reactions occur: 1. Chemical bonds are broken and new bonds form. 2.

When chemical reactions occur: 1. Chemical bonds are broken and new bonds form. 2. Energy is produced (exothermic) or absorbed (endothermic). 3. New compounds are formed, or compounds decompose to their elements. 4. The law of conservation of mass is obeyed.

Reactions are represented by chemical equations: A+B → C+D REACTANTS PRODUCTS Chemical Equations are

Reactions are represented by chemical equations: A+B → C+D REACTANTS PRODUCTS Chemical Equations are the “written” way to represent a chemical reaction.

Chemical Equation Symbols , yields

Chemical Equation Symbols , yields

Reading Equations Na. Cl (aq) + Ag. NO 3 (aq) Na. NO 3 (aq)

Reading Equations Na. Cl (aq) + Ag. NO 3 (aq) Na. NO 3 (aq) + Ag. Cl (s) This reads: A water solution of sodium chloride reacts with a water solution of silver nitrate to yield a water solution of sodium nitrate and a precipitate (solid) of silver chloride.

Chemical Reactions Since matter can not be created or destroyed, chemical reactions must be

Chemical Reactions Since matter can not be created or destroyed, chemical reactions must be balanced in terms of mass. The amount of mass you Reactants → Products start with must be equal to the mass of the 100 g total = 100 g total products.

Balancing Steps 1. If you are given a word equation, write the chemical equation

Balancing Steps 1. If you are given a word equation, write the chemical equation with the correct formulas and symbols- don’t forget diatomics 2. Add coefficients to the formulas to make the number of atoms of each element on both sides of the equation the same. 3. You may not add coefficients to the middle of a formula.

Balancing Steps 4. You may not change the subscript of a correctly written formula.

Balancing Steps 4. You may not change the subscript of a correctly written formula.

1. 2. 3. 4.

1. 2. 3. 4.

Writing Equations from words: Start with a skeleton equation: -Write the formulas of the

Writing Equations from words: Start with a skeleton equation: -Write the formulas of the reactants on the left side of the yield sign and products on the right side Fe+O 2→Fe 2 O 3 -Next add information like physical states, catalysts involved, etc. Fe(s)+O 2(g)→Fe 2 O 3(s) -Then you need to balance the equation.

Types of Reactions

Types of Reactions

Remember that during a chemical reaction a chemical change occurs… Indicators of a chemical

Remember that during a chemical reaction a chemical change occurs… Indicators of a chemical change include: 1. Energy Change – heat or light is produced, or a decrease in temperature. – Exothermic – gives off heat, feels hot – Endothermic – takes in heat, feels cool.

2. Production of a gas (you see bubbles or fizzing) 3. Precipitate – a

2. Production of a gas (you see bubbles or fizzing) 3. Precipitate – a solid is formed when two liquids are mixed together. The indicator that a precipitate has formed is that the liquid turns cloudy. 4. Color change (unexpected change)

Combination Reaction (synthesis) • A chemical change where 2 or more substances react to

Combination Reaction (synthesis) • A chemical change where 2 or more substances react to form a new compound • only one product • opposite of a decomposition reaction A + B → AB

Synthesis Example: 2 H 2 + O 2 → 2 H 2 O

Synthesis Example: 2 H 2 + O 2 → 2 H 2 O

Predict the products and write the balanced chemical equation. 1. Potassium reacts with oxygen

Predict the products and write the balanced chemical equation. 1. Potassium reacts with oxygen 2. Lithium oxide reacts with water 3. Carbon dioxide reacts with water 4. Carbon burns 5. Sodium reacts with bromine

Decomposition Reaction • A chemical change where a single compound breaks down into 2

Decomposition Reaction • A chemical change where a single compound breaks down into 2 or more simpler products • only one reactant AB → A + B

Decomposition Example: 2 H 2 O → 2 H 2 + O 2

Decomposition Example: 2 H 2 O → 2 H 2 + O 2

1. Barium hydroxide decomposes when heated 2. Sodium carbonate decomposes when heated 3. Lithium

1. Barium hydroxide decomposes when heated 2. Sodium carbonate decomposes when heated 3. Lithium chlorate decomposes when heated 4. Aluminum oxide decomposes during electrolysis 5. Carbonic acid decomposes 6. Calcium chlorate decomposes when heated

Single-Replacement Reaction • A chemical change in which one element replaces another in a

Single-Replacement Reaction • A chemical change in which one element replaces another in a compound – metal replaces metal (+) – nonmetal replaces nonmetal (-) A + BC → B + AC

Single Replacement Cu(s) + 2 Ag. NO 3(aq) → Cu(NO 3)2(aq) + 2 Ag(s)

Single Replacement Cu(s) + 2 Ag. NO 3(aq) → Cu(NO 3)2(aq) + 2 Ag(s)

Activity Series The elements at the top are the most reactive. In a single

Activity Series The elements at the top are the most reactive. In a single replacement reaction, a free element will replace anything below itself on the activity series. For halogens (group 17) the most reactive is fluorine and the least reactive is iodine. Find this Activity Series on your formula chart. Other helpful info: Group 1 and 2 metals most active, transition metals less active, and jewelry metals and H least active

Use the activity series to determine if the following single replacement reactions occur. If

Use the activity series to determine if the following single replacement reactions occur. If they do, write the equation and balance. If the reaction does not occur, write the reactants, the yield sign, and No Reaction. 1. iron and silver sulfate 2. aluminum + hydrochloric acid 3. potassium + water 4. fluorine + potassium bromide

Double-Replacement Reaction (precipitation rxns) • elements in two compounds exchange places to make two

Double-Replacement Reaction (precipitation rxns) • elements in two compounds exchange places to make two new compounds. • generally take place in aqueous solutions AB + CD → AD + CB

Double-Replacement These reactions occur between ions in aqueous solutions and produce at least one

Double-Replacement These reactions occur between ions in aqueous solutions and produce at least one of the following: a precipitate, a gas or water. Formation of a precipitate- if a product is not soluble, it is a precipitate. Use the solubility chart/rules. Na. Cl(aq) + Ag. NO 3(aq) → Na. NO 3(s) + 2 KNO 3(aq)

Solubility rules for doublereplacement reactions Locate the Solubility rules on your formula chart.

Solubility rules for doublereplacement reactions Locate the Solubility rules on your formula chart.

Double-Replacement Formation of a gas. HCl (aq) + Fe. S (s) → Fe. Cl

Double-Replacement Formation of a gas. HCl (aq) + Fe. S (s) → Fe. Cl 2 (aq) + H 2 S (g) Formation of water. HCl (aq) + Na. OH (aq) → Na. Cl (aq) + H 2 O (l) Formation of product which decomposes. Ca. CO 3 (s) + HCl (aq) → Ca. Cl 2 (aq) + CO 2(g) + H 2 O (l) *extra rules in notes*

1. potassium iodide + lead (II) nitrate 2. sodium iodide + acetic acid 3.

1. potassium iodide + lead (II) nitrate 2. sodium iodide + acetic acid 3. barium nitrate + calcium carbonate 4. sodium carbonate + hydrochloric acid

Combustion Reaction When hydrocarbons burn in excess oxygen, the products are always carbon dioxide

Combustion Reaction When hydrocarbons burn in excess oxygen, the products are always carbon dioxide and water. If there is too little oxygen, CO is produces which is highly toxic. C 4 H 6 + O 2 → CO 2 + H 2 O

1. CH 4 + O 2 2. CH 3 OH + O 2 3.

1. CH 4 + O 2 2. CH 3 OH + O 2 3. C 3 H 4 + O 2

Identify the type of reaction, predict the products, and balance. 1. __ Na +

Identify the type of reaction, predict the products, and balance. 1. __ Na + __ Zn. O → 2. __ Mg. CO 3 → 3. __ C 4 H 8 + __ O 2 → 4. __ Li 3 PO 4 + __ Ca(NO 3)2 → 5. __ Ag + __S →

Redox Reactions and Oxidation #’s Redox stands for reduction-oxidation reactions. Electrons move from one

Redox Reactions and Oxidation #’s Redox stands for reduction-oxidation reactions. Electrons move from one atom to another or from one ion to another.

REMEMBER this: Losing electrons become more positive Gaining electrons become more negative O oxidation

REMEMBER this: Losing electrons become more positive Gaining electrons become more negative O oxidation I is L losing R reduction I is G gaining

Example: 2 Na + Cl 2 → 2 Na. Cl Assign Oxidation Numbers 0

Example: 2 Na + Cl 2 → 2 Na. Cl Assign Oxidation Numbers 0 0 +1 -1 2 Na + Cl 2 → 2 Na. Cl Which element is oxidized? ___Na__ Which element is reduced? ___Cl__

1. Complete, balance and identify element oxidized and element reduced. Al + O 2

1. Complete, balance and identify element oxidized and element reduced. Al + O 2 →

2. Balance and identify element oxidized and element reduced. Fe + S →

2. Balance and identify element oxidized and element reduced. Fe + S →

Examples of REDOX Reactions -Iron rusting. -Hydrogen peroxide sanitizing wounds. -Photography development. -Chlorine bleach

Examples of REDOX Reactions -Iron rusting. -Hydrogen peroxide sanitizing wounds. -Photography development. -Chlorine bleach whitening laundry. -Silver tarnishing.

Rusting Requires oxygen and water to be present. Rusting is a slow process since

Rusting Requires oxygen and water to be present. Rusting is a slow process since water droplets have few ions making them poor electrolytes

Corrosion The loss of metal resulting from an oxidation-reduction reaction of the metal with

Corrosion The loss of metal resulting from an oxidation-reduction reaction of the metal with substances in the environment. Corrosion occurs faster with water with abundant ions - ie. seawater or regions where roads are salted. To prevent corrosion iron can be coated with another metal that is more resistant - like zinc - this is called galvanizing.

Net Ionic Equations Reactions that are simplified to only show what particles are changing.

Net Ionic Equations Reactions that are simplified to only show what particles are changing. What type of reaction is happening… Pb(NO 3)2 (aq) + Na. I (aq) →

Pb(NO 3)2 (aq) + Na. I (aq) → Pb. I 2 (s) + Na.

Pb(NO 3)2 (aq) + Na. I (aq) → Pb. I 2 (s) + Na. NO 3 (aq) Are there any ions that aren’t undergoing a chemical change? A net ionic equations does not show the ions that don’t change (ions that stay aqueous) Strong acids completely ionize: HCl, HBr, HI, HNO 3, HCl. O 4, H 2 SO 4

Steps for Writing Net Ionic Equations 1. Write the balanced equation with all states

Steps for Writing Net Ionic Equations 1. Write the balanced equation with all states labeled. (THIS IS THE CHEMICAL EQUATION – sometimes called MOLECULAR EQUATION) 2. Split any aqueous ionic or strong acids into ions. (THIS IS THE TOTAL IONIC EQUATION) 3. Cancel out any ions that appear on each side of the arrow (called spectator ions). (THIS IS THE NET IONIC EQUATION)

Ag. NO 3 (aq) + Na. Cl (aq) → Na. NO 3 (aq) +

Ag. NO 3 (aq) + Na. Cl (aq) → Na. NO 3 (aq) + Ag. Cl (s) This is the chemical equation – it is what we’ve been doing for weeks.

This is the total ionic equation- it shows ions for aqueous ionic or strong

This is the total ionic equation- it shows ions for aqueous ionic or strong acids.

1. A strip of magnesium is added to a solution of silver nitrate.

1. A strip of magnesium is added to a solution of silver nitrate.

2. A solution of hydrogen peroxide is heated.

2. A solution of hydrogen peroxide is heated.

3. Solutions of sodium hydroxide and hydrochloric acid are mixed.

3. Solutions of sodium hydroxide and hydrochloric acid are mixed.

4. Chlorine gas is bubbled into a solution of sodium bromide.

4. Chlorine gas is bubbled into a solution of sodium bromide.