Kverneland Taarup Horizontal Auger Diet Feeders Product Information

Kverneland Taarup Horizontal Auger Diet Feeders Product Information 2012

1 2 Range overview >> Exit 3 2 Auger System Weighing System 4 Different Material 5 Even Distribution

Range overview Model 608 610 612 614 616 618 8 10 12 14 16 18 Loading capacity (kg) 3500 4400 5200 6100 7200 8000 Empty weight (kg) 3500 3600 4700 5300 5400 12. 50/80 x 15. 3 tyres (m) 2, 42 2, 69 - - 315/80 x. R 22. 5 tyres (m) - - 2, 50 2, 78 - - 40 x 14 tyres (m) - - 2, 44 2, 71 2, 64 2, 83 15 x. R 22. 5 x 18 ply tyres (m) - - 2, 70 2, 88 Overall length (m) 5, 16 6, 16 7, 16 Overall width (m) 2, 10 2, 10 Overall with over tyres (m) 2, 01 2, 13 ´Capacity (m 3) Overall height

Two Auger System Horizontal Auger Diet Feeders

Overview Kverneland 608 -610 -612 -614 -616 -618 Kverneland Load Capacity Load Weight Power Req. 608 8 m³ 3500 kg 55/60 k. W/hp 610 10 m³ 4400 kg 55/60 k. W/hp 612 12 m³ 4600 kg 60/80 k. W/hp 614 14 m³ 4700 kg 60/80 k. W/hp 616 16 m³ 5300 Kg 70/95 k. W/hp 618 18 m³ 5400 kg 70/95 k. W/hp Brochure

Robust Auger Drive - Simple chain & sprocket transmission for long life & simple maintenance - All chains and sprockets are situated in an oil bath, providing continuous lubrication - Easy access to the complete drive mechanism

The Two Auger System The two contra-rotating augers ensure fast incorporation of long or baled material with other components The auger- shear bar combination permits the fast incorporation of baled or long material, ensuring mixing time is as short as possible The shear bar

The Knives The two augers are fitted with replaceable circular cutting knives with a multiple of useable cutting edges For a more aggressive cutting action - additional knives can be fitted to the augers as necessary

The Mixing Chamber The lower part of the mixing chamber features a unique design of corrosion resistant Cor-Ten steel overlaid with Ultra-Glide plastic liners - Cor-Ten prevents rusting of the lower mixing chamber - Ultra-Glide plastic is unaffected by moisture & acid, while helping to reduce friction & power required during mixing. Ultra-Glide plastic can be replaced quickly & at relatively low cost.

Weighing System Horizontal Auger Diet Feeders

Full Control During Loading Kverneland 600 series offer a highly accurate weighing system - the Kverneland TMRscale

Weighing and Sensor

The Weighing System The 3 heavy duty weigh bars ensure long life and accuracy - an essential consideration when formulating feed rations

Full Control During Loading The easy to read display is mounted on a rotating arm that can be mounted either side of the machine and viewed during the loading and discharge operations

The Kverneland TMRscale is available in 3 formats: • 401 - simple up/down weigh scale • 402 - simple up/down weigh scale with remote control unit for all functions (excluding system on/off) • 403 - fully programmable weigh scale for multiple recipes with multiple components

The Remote Control With the optional remote control (model TMRscale 402) the scale is easily reset from the loader between each feed component ideal for loading and feeding by 1 person

Different Material Horizontal Auger Diet Feeders

Easy and Convenient Incorporation of All Material The Kverneland 600 series is specifically designed to incorporate all feed formats into the ration without the need for pre-chopping

Incorporation of All Material Round bales Loose clamp material Square bales Concentrates

Incorporation of All Material

Fast Incorporation of Even Two Bales The combination of the two contra -rotating augers and the shear bar offers the possibility to cut & mix all material types in all formats - even 2 bales at the same time!

Fast Cutting & Mixing Action

Adding Minerals Small amount of minerals and concentrates can be introduced into the ration via the loading grill at the rear.

Even Distribution Horizontal Auger Diet Feeders

Even Distribution All machines are prepared for distribution to 1 or 2 sides - discharge to left or right side independently or even simultaneously – Discharge options include simple discharge chute …. . – …. . or PVC discharge conveyor in lengths from 0, 65 to 2 m

Even Distribution

Conveyor Belt The silent-running ribbed conveyor belt ensures precise and even distribution

Conveyor Belt The conveyor systems offer flexibility for discharge onto the floor, over feed barriers or into troughs. Discharge height is controlled by the hydraulic lift cylinder

Fixed Discharge Chute The fixed discharge chute is an ideal solution for low cost discharge or when operating in narrow cow sheds

Two Doors for More Efficient Feeding If necessary the Kverneland 600 series can be supplied with two doors for simultaneous distribution on left and right side in one pass

Door Position Indicator An easily visible graduated indicator at the front of the machine informs the driver regarding the discharge door position

The 4 Arguments - 600 Series 1 2 contra-rotating augers & circular knives with multiple cutting edges – flexibility to cut and mix with the same machine 2 Fully modular & adjustable central shear bar for cutting & mixing all feed materials 3 Precise weighing system with remote control options for very easy operation 4 Multiple discharge options to suit the feeding method of each farm