USP 797 Standards Pharmaceutical Compounding Sterile Preparations Randy

  • Slides: 31
Download presentation
– USP <797> Standards – Pharmaceutical Compounding Sterile Preparations Randy Grekowicz, RPh; MBA Suzanne

– USP <797> Standards – Pharmaceutical Compounding Sterile Preparations Randy Grekowicz, RPh; MBA Suzanne Lee, Pharm. D; RPh Clinical Associate Professor University of Washington, School of Pharmacy

What is USP <797>? n USP stands for United States Pharmacopeia n n It

What is USP <797>? n USP stands for United States Pharmacopeia n n It is a non-government, non-profit organization which is designed to create standards on patient safety, healthcare information, and verification of products <797> specifically refers to sterile compounding of pharmaceutics (i. e. IV admixtures) in order to prevent patient harm

Risk Level Classifications of Compounded Sterile Products n n Risk level classifications are divided

Risk Level Classifications of Compounded Sterile Products n n Risk level classifications are divided up into low, medium, and high depending on how much manipulation to the admixture is involved Low-risk level: n n Manually mixing no more than three products to compound drug admixtures i. e. Morphine drip, Dopamine drip, KCl drip

Risk Level Classification, cont. n Medium-risk level: n n Multiple individual doses of sterile

Risk Level Classification, cont. n Medium-risk level: n n Multiple individual doses of sterile products are combined to prepare a product that will be administered to multiple patients or the same patients on multiple occasions Compounding includes complex aseptic manipulations other than single volume transfer i. e. TPN admixtures Inpatient pharmacy normally practices at a medium-risk level

Risk Level Classification, cont. n High-risk level: n n n Measuring or mixing sterile

Risk Level Classification, cont. n High-risk level: n n n Measuring or mixing sterile ingredients in non-sterile devices before sterilization is performed Dissolving non-sterile bulk drug and nutrient powders to make solutions, which will be sterilized i. e. Cardioplegia drips

Standard Operating Procedures n n n n Prior to entering the IV room: n

Standard Operating Procedures n n n n Prior to entering the IV room: n Remove outer jackets, and jewelry (watches/rings) n Long-sleeved shirts may NOT be worn Personnel must comply to the cleaning and gowning policy (Hair bonnet, mask, gown, gloves, shoe covers) All additive containers must be swabbed with 70% isopropyl alcohol Blowers of the laminar air hoods must operate continuously Supplies must be arranged aseptically within the hood to minimize air flow turbulence At the end of compounding, discard all syringes and needles in the sharps container All compounded products will be labeled properly

Initial Garbing n Mask n n Hair bonnet n n Masks must cover the

Initial Garbing n Mask n n Hair bonnet n n Masks must cover the nose and mouth All hair must be contained within the hair cover Shoe covers

Hand Washing n n Thoroughly wash hands, nails, and arms up to the elbow

Hand Washing n n Thoroughly wash hands, nails, and arms up to the elbow with antiseptic cleansing agent and water for 30 seconds Dry hands with a non-shedding towel

Gowning for Sterile Compounding n Cover gown must be donned

Gowning for Sterile Compounding n Cover gown must be donned

After Gowning. . . n n Wear protective gloves Gloves extend over the gown

After Gowning. . . n n Wear protective gloves Gloves extend over the gown cuffs Gloves should be sprayed with isopropyl alcohol 70% and rubbed thoroughly Allow gloves to air dry before proceeding with sterile preparations

Gloves n n Intermittently sterilize gloves with isopropyl alcohol 70% Change glove when torn,

Gloves n n Intermittently sterilize gloves with isopropyl alcohol 70% Change glove when torn, punctured, or contaminated

Chemotherapy/Biohazard n Put on a disposable chemo gown and chemo gloves prior to compounding

Chemotherapy/Biohazard n Put on a disposable chemo gown and chemo gloves prior to compounding a chemotherapeutic or biohazard agent n Make sure that the gloves extend over the cuff of the gown

Cleaning of Compounding Area n n n Use isopropyl alcohol 70% to clean the

Cleaning of Compounding Area n n n Use isopropyl alcohol 70% to clean the compounding area prior to the beginning of each shift Allow alcohol to remain for at least 30 seconds Clean from back to front and top to bottom and avoid contact and contamination of the HEPA filter

Correct Hood Cleaning

Correct Hood Cleaning

Incorrect Hood Cleaning

Incorrect Hood Cleaning

Aseptic Technique n n A technique for manipulations of compounded sterile products and parenteral

Aseptic Technique n n A technique for manipulations of compounded sterile products and parenteral preparations that prevents contamination Contamination sources: n n People – touch and airflow contamination Air (via ventilation or air conditioning) Infiltration (via adjacent rooms) Internal generation (via walls, floors, ceilings)

HEPA Filter n n n High Efficiency Particulate Air (HEPA) filter removes 99. 97%

HEPA Filter n n n High Efficiency Particulate Air (HEPA) filter removes 99. 97% of all air particles 0. 3 microns or larger It flows at a constant rate and physically sweeps the work area and prevents the entry of contaminated air Nothing should be permitted to come in contact with the HEPA filter n n This includes cleaning solutions, aspirate from syringes, sterile fluids Break ampules away from the HEPA filter

Air Flow Hoods n Horizontal Flow (Laminar Flow Hood) n n Air blows towards

Air Flow Hoods n Horizontal Flow (Laminar Flow Hood) n n Air blows towards the personnel Should be left operating continuously If it is turned off, it must be run for 30 minutes to re-establish air flow and be cleaned before use Vertical Flow (Chemotherapy Hood) n n n Air blows from top down Should be left operating continuously If it is turned off, it must be run for 4 hours to reestablish air flow and be cleaned before use

Correct Placement of Items in a Laminar Flow Hood

Correct Placement of Items in a Laminar Flow Hood

Incorrect Placement of Items in a Laminar Flow Hood

Incorrect Placement of Items in a Laminar Flow Hood

Aseptic Manipulation n n All sterile compounding inside the hood should take place at

Aseptic Manipulation n n All sterile compounding inside the hood should take place at least six inches into the hood to prevent contamination from the room air Only essential products should be in the hood n No paper, pens, calculators, or labels in the hood

Aseptic Technique, cont. n n n Hand placement during aseptic manipulation should be such

Aseptic Technique, cont. n n n Hand placement during aseptic manipulation should be such that laminar airflow is not interrupted around any of of the critical sterile surface pathways Talking or coughing should be directed away from the hood to minimize contamination No food or drink is allowed in the clean room

Vials n n n Swab the rubber top of the vial with an alcohol

Vials n n n Swab the rubber top of the vial with an alcohol prep using firm strokes in a unidirectional sweeping motion at least 3 times Allow the alcohol to air dry Inject an equal amount of air for the volume of fluid to be removed to prevent vacuum formation

Syringes n Never touch the tip or plunger of the syringe, this could lead

Syringes n Never touch the tip or plunger of the syringe, this could lead to touch contamination

Syringes, cont. n n Syringes are available in sizes ranging from 1 to 60

Syringes, cont. n n Syringes are available in sizes ranging from 1 to 60 m. L In most cases, you should use the smallest syringe possible to draw up your complete volume; exception: Chemotherapy

Needles n n n Needle size is determined by gauge and length Never touch

Needles n n n Needle size is determined by gauge and length Never touch any part of the needle Open needle packages within hood to maintain sterility n n n Peel open the needle wrapper Tearing the paper introduces paper particles into the hood, leading to contamination Needles and syringes must be disposed of in the sharps container

Needles, cont. n n n Coring: A core or hole in the rubber top

Needles, cont. n n n Coring: A core or hole in the rubber top of the vial To prevent coring, insert the needle as shown Insert the bevel tip first, then press downward and toward the bevel so that the bevel tip and heel enter at the same point

Ampules n n Clean the ampule neck with an alcohol swab Leave swab in

Ampules n n Clean the ampule neck with an alcohol swab Leave swab in place and grasp the ampule neck Use quick, firm, snapping motion away from the body towards the side wall of the hood Do NOT break ampule towards HEPA filter

Ampules, cont. n To withdraw medication from the ampule: n n Tilt ampule Place

Ampules, cont. n To withdraw medication from the ampule: n n Tilt ampule Place needle bevel near opening of ampule n n n No need to withdraw air first Pull back on syringe plunger Do NOT use a filter needle to remove ampule contents Use a filter needle to push contents out of the syringe Filter needles can only be used in one direction, otherwise glass particles originally filtered are reintroduced

Final Product n Inspect final product after admixing to look for precipitation, cores, or

Final Product n Inspect final product after admixing to look for precipitation, cores, or other particulate matter

Labeling requirements n n n Patient name Patient location Drug name, strength, and amount

Labeling requirements n n n Patient name Patient location Drug name, strength, and amount Diluent and volume Route of administration Beyond use date and time (Expiration) Infusion rate Compounder’s initials Pharmacist’s initials Auxiliary label(s) Bar code (whenever possible)