Physics 2102 Jonathan Dowling Lecture 39 FRI 24

Physics 2102 Jonathan Dowling Lecture 39: FRI 24 APR Ch. 35: Interference Christian Huygens 1629 -1695

The Lunatic Fringe: The waves arriving at the screen from the two slits will interfere constructively or destructively depending on the different length they have travelled. Maximum fringe at q=0, (central maxima) other maxima at Similarly for dark fringes: d sin q= (m+1/2)

The Return Of the Phasor! Phase Difference 2 =360° =180°

Example Red laser light ( =633 nm) goes through two slits 1 cm apart, and produces a diffraction pattern on a screen 55 cm away. How far apart are the fringes near the center? If the fringes are near the center, we can use sin q ~ q, and then m =dsinq~dq => q=m /d is the angle for each maximum (in radians) Dq= l/d =is the “angular separation”. The distance between the fringes is then Dx=LDq=L /d=55 cmx 633 nm/1 cm=35 mm For the spacing to be 1 mm, we need d~ L /1 mm=0. 35 mm

Example In a double slit experiment, we can measure the wavelength of the light if we know the distances between the slits and the angular separation of the fringes. If the separation between the slits is 0. 5 mm and the first order maximum of the interference pattern is at an angle of 0. 059 o from the center of the pattern, what is the wavelength and color of the light used? d sinq=m => =0. 5 mm sin(0. 059 o) = 5. 15 10 -7 m=515 nm ~ green q

Example A double slit experiment has a screen 120 cm away from the slits, which are 0. 25 cm apart. The slits are illuminated with coherent 600 nm light. At what distance above the central maximum is the average intensity on the screen 75% of the maximum? I/I 0=4 cos 2 f/2 ; I/Imax=cos 2 f/2 =0. 75 => f=2 cos– 1 (0. 75)1/2=60 o= /3 rad f=(2 d/ )sinq => q= sin-1( /2 d)f=0. 0022 o=40 mrad (small!) y=Lq=48 mm

Radio Waves Two radio towers, separated by 300 m as shown the figure, broadcast identical signals at the same wavelength. A radio in the car, which traveling due north, receives the signals. If the car is positioned at the second maximum, what is the wavelength of the signals? Where will the driver find a minimum in reception? dsinq=m => = dsinq/2 sin q= 400/(4002+10002)1/2=0. 37 =55. 7 m “Dark” fringes: dsinq=(m+1/2) /d=2. 5 x 55. 7 m/300 m =0. 464 =>q= 28 o tanq=y/1000 m => y=1000 m x tan(28 o)=525 m

Interference: Example A red light beam with wavelength =0. 625 mm travels through glass (n=1. 46) a distance of 1 mm. A second beam, parallel to the first one and originally in phase with it, travels the same distance through sapphire (n=1. 77). • How many wavelengths are there of each beam inside the material? In glass, g=0. 625 mm/1. 46= 0. 428 mm and Ng=D/ g=2336. 45 In sapphire, s=0. 625 mm/1. 77= 0. 353 mm (UV!) and Ns=D/ s=2832. 86 • What is the phase difference in the beams when they come out? The difference in wavelengths is Ns-Ng=496. 41. Each wavelength is 360 o, so DN=496. 41 means Df=DNx 360 o=0. 41 x 360 o=148 o • How thick should the glass be so that the beams are exactly out of phase at the exit (destructive interference!) DN=D/ s- D/ g= (D/ )(n 2 -n 1)=0. 31 (D/ )=m+1/2 A thickness D=(m+0. 5) 2. 02 mm would make the waves OUT of phase. For example, 1. 008 mm makes them in phase, and 1. 010 mm makes them OUT of phase.

Thin Film Interference: The patterns of colors that one sees in oil slicks on water or in bubbles is produced by interference of the light bouncing off the two sides of the film. To understand this we need to discuss the phase changes that occur when a wave moves from one medium to the another where the speed is different. This can be understood with a mechanical analogy.

Reflection, Refraction and Changes of Phase: Consider an UP pulse moving in a rope, that reaches a juncture with another rope of different density. A reflected pulse is generated. The reflected pulse is also UP if the speed of propagation in the rope of the right is faster than on the left. (Low impedance. ) The reflected pulse is DOWN if the speed of propagation in the right is slower than on the left. (High impedance. ) The extreme case of ZERO speed on the right corresponds to a rope anchored to a wall. (Highest impedance. ) If we have a wave instead of a pulse “DOWN” means 180 degrees OUT of phase, and UP means 360° or IN PHASE.

Thin Films First reflected light ray comes from first interface, second from second. These rays interfere with each other. n 1 n 2 n 3 How they interfere will depend on the relative indices of refraction. In the example above the first ray suffers a 180 degree phase change (1/2 a wavelength) upon reflection. The second ray does not change phase in reflection, but has to travel a longer distance to come back up. The distance is twice thickness of the layer of oil. For constructive interference the distance 2 L must therefore be a half-integer multiple of the wavelength, i. e. 0. 5 , 1. 5 , …, (0. 5+2 n).

Thin Films: Soap Bubbles If the film is very thin, then the interference is totally dominated by the 180° phase shift in the reflection. At the top the film is thinnest (due to gravity it lumps at the bottom), so one sees thefilm dark at the top. 180° Air: n=1 0° Soap: n>1 Air This film is illuminated with white light, therefore we see fringes of different colors corresponding to the various constructive interferences of the individual components of the white light, which change as we go down. The thickness increases steeply as we go down, which makes the width of the fringes become narrower and narrower.

Reflective Coatings To make mirrors that reflects light of only a given wavelength, a coating of a specific thickness is used so that there is constructive interference of the given wavelength. Materials of different index of refraction are used, most commonly Mg. Fe 2 (n=1. 38) and Ce. O 2 (n=2. 35), and are called “dielectric films”. What thickness is necessary for reflecting IR light with =1064 nm? n=2. 35 n=1. 38 First ray: Df=180 deg= Second ray: Df=2 L(2 /( /n))= => L= Ceo 2/4=( /n)/4=113 nm Third ray? If wafer has the same thickness (and is of the same material), Df=4 L(2 /( /n)=2 : destructive! Choose Mg. Fe 2 wafer so that Df=(2 n 1 L 1+2 n 2 L 2) (2 / )= + 2 n 2 L 2 (2 / )=3 => L 2= /2 n 2 = 386 nm We can add more layers to keep reflecting the light, until no light is transmitted: all the light is either absorbed or reflected.

Anti-Reflective Coatings Semiconductors such a silicon are used to build solar cells. They are coated with a transparent thin film, whose index of refraction is 1. 45, in order to minimize reflected light. If the index of refraction of silicon is 3. 5, what is the minimum width of the coating that will produce the least reflection at a wavelength of 552 nm? n=1. 45 Both rays undergo 180 phase changes at reflection, therefore for destructive interference (no reflection), the distance travelled (twice thickness) should be equal to half a wavelength in the coating

Anti-Reflective Coatings Radar waves have a wavelength of 3 cm. Suppose the plane is made of metal (speed of propagation=0, n is infinite and Stealth Fighter reflection on the polymer-metal surface therefore has a 180 degree phase change). The polymer has n=1. 5. Same calculation as in previous example gives, On the other hand, if one coated a plane with the same polymer (for instance to prevent rust) and for safety reasons wanted to maximize radar visibility (reflective coating!), one would have

Michelson Interferometers: As we saw in the previous example, interference is a spectacular way of measuring small distances (like thickness of a soap bubble), since we are able to resolve distances of the order of the wavelength of the light (for instance, for yellow light, we are talking about 0. 5 of a millionth of a meter, 500 nm). This has therefore technological applications. In the Michelson interferometer, light from a source (at the left, in the picture) hits a semiplated mirror. Half of it goes through to the right and half goes upwards. The two halves are bounced back towards the half plated mirror, interfere, and the interference can be seen by the observer at the bottom. The observer will see light if the two distances travelled d 1 and d 2 are equal, and will see darkness if they differ by half a wavelength.

Michelson-Morley Experiment Michelson won the Nobel prize in 1907, "for his optical precision instruments and the spectroscopic and metrological investigations carried out with their aid" "The interpretation of these results is that there is no displacement of the interference bands. . The result of the hypothesis of a stationary ether is thus shown to be incorrect. " (A. A. Michelson, Am. J. Sci, 122, 120 (1881))

The largest Michelson interferometer in the world is in Livingston, LA, in LSU owned land (it is operated by a project funded by the National Science Foundation run by Caltech and MIT, and LSU collaborates in the project). http: //www. ligo-la. caltech. edu Mirrors are suspended with wires and will move detecting ripples in the gravitational field due to astronomical events.

Gravitational Waves Interferometry: an International Dream GEO 600 (British-German) Hannover, Germany TAMA (Japan) Mitaka LIGO (USA) Hanford, WA and Livingston, LA AIGO (Australia), Wallingup Plain, 85 km north of Perth VIRGO (French-Italian) Cascina, Italy