MEMORY MODE The HAAS Control Series SLIDE LEGEND
- Slides: 12
MEMORY MODE The HAAS Control Series
SLIDE LEGEND PRESS ACTIONS KEYS THREE TIMES TO GET TO THIS PAGE INSTRUCTIONS (Continued on next slide) INFORMATION Note: OTHER INFORMATION To advance through the presentation click on your left mouse button or press <ENTER>. To exit press <ESC>.
MEMORY MODE This module is intended to provide you with a familiarization of the Memory Mode on the Haas Control
Here is where you find the Memory Buttons
Memory Buttons MEMORY: SINGLE BLOCK: DRY RUN: OPTIONAL STOP: Pressing the memory button on the control will display the current program for running when you press <CYCLE START>. BLOCK DELETE: The current program is the one that has been selected in LIST PROGRAMS.
Memory Button: MEMORY Button: The selected program is ready to run. Press <CYCLE START> PROGRAM (MEM) O 91002 G 01 Z-0. 0337 O 12345 (MILLF 7. LAB; PROG 1) ; G 01 X-0. 5687 Y-0. 9857 ; G 01 X-0. 2275 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X-0. 7835 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X 0. 7835 ; G 01 X 0. 3058 Y 0. 5308 ; G 01 X 0. 7835 ; G 03 X 0. 2475 Y 0. 5508 R 0. 02 ; F 4 FOR PROG REVIEW N 00000
Single Block Button: SINGLE BLOCK Button: Used like a toggle switch. The control will execute one block of program then stop; every press of <CYCLE START> will execute one more block. With Setting 104: Jog Handle to Single Block ON Press <CYCLE START> Then rotate the Jog Handle CCW to run the program. Each click of the handle will execute 1 block. CW = Feed Hold PROGRAM (MEM) O 91002 N 00000 G 01 Z-0. 0337 O 12345 (MILLF 7. LAB; PROG 1) ; G 01 X-0. 5687 Y-0. 9857 ; G 01 X-0. 2275 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X-0. 7835 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X 0. 7835 ; G 01 X 0. 3058 Y 0. 5308 ; G 01 X 0. 7835 ; G 03 X 0. 2475 Y 0. 5508 R 0. 02 ; F 4 FOR PROG REVIEW SINGBK Excellent for checking out your program when in Graphics Mode
Dry Run Button: DRY RUN Button: Used in Memory or MDI mode. Used to check a program using reduced speeds and feeds. All rapids and feed rates are run at the rate selected with the JOG speed keys. Press Select the speed. Press <HAND CNTL SPIN> Adjust with Jog Handle PROGRAM (MEM) O 91002 G 01 Z-0. 0337 O 12345 (MILLF 7. LAB; PROG 1) ; G 01 X-0. 5687 Y-0. 9857 ; G 01 X-0. 2275 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X-0. 7835 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X 0. 7835 ; G 01 X 0. 3058 Y 0. 5308 ; G 01 X 0. 7835 ; G 03 X 0. 2475 Y 0. 5508 R 0. 02 ; DRY RUN SPEED 1. DRYRUN N 00000
Optional Stop Button: OPTIONAL STOP Button: When an M 01 command is encountered in the program, then a program stop will be executed. Press <CYCLE START> to continue. PROGRAM (MEM) O 91002 N 00000 G 01 Z-0. 0337 O 12345 (MILLF 7. LAB; PROG 1) ; G 01 X-0. 5687 Y-0. 9857 ; G 01 X-0. 2275 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X-0. 7835 ; G 01 X 0. 1314 Y 0. 2275 ; M 01 G 01 X 0. 7835 (Optional Stop); G 01 X-0. 5687 Y-0. 9857 ; G 01 X-0. 2275 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X-0. 7835 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X 0. 7835 ; G 01 X 0. 3058 Y 0. 5308 ; G 01 X 0. 7835 ; G 03 X 0. 2475 Y 0. 5508 R 0. 02 ; F 4 FOR PROG REVIEW OPTSTP
Block Delete Button: BLOCK DELETE Button: When a program block begins with a slash (/) it will be ignored (i. e. , that program block will not execute). PROGRAM (MEM) O 91002 N 00000 G 01 Z-0. 0337 O 12345 (MILLF 7. LAB; PROG 1) ; G 01 X-0. 5687 Y-0. 9857 ; G 01 X-0. 2275 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X-0. 7835 ; G 01 X 0. 1314 Y 0. 2275 ; /G 01 X 0. 7835 (Block Delete) ; G 01 X-0. 5687 Y-0. 9857 ; G 01 X-0. 2275 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X-0. 7835 ; G 01 X 0. 1314 Y 0. 2275 ; G 01 X 0. 7835 ; G 01 X 0. 3058 Y 0. 5308 ; G 01 X 0. 7835 ; G 03 X 0. 2475 Y 0. 5508 R 0. 02 ; F 4 FOR PROG REVIEW BLKDEL
Prepared by Haas Automation Training Department Oxnard, CA 93030
- A mode ultrasound
- Heel and toe polka
- Focus mode and diffuse mode
- Mode địa chỉ tức thì là mode
- Difference between real mode and virtual mode of 80386
- Timer modes of 8051
- Gartner mode 1 mode 2
- Perbedaan (planning mode) dan (evolutionary mode)
- Min mode and max mode in 8086
- Protected mode memory addressing
- Scisr
- Semantic memory example
- Explicit memory