doc IEEE 802 22 060008 r 1 Nov

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 Backup primary protecting device for beacon device Authors: IEEE P 802. 22 Wireless RANs Date: 2006 -11 -15 Notice: This document has been prepared to assist IEEE 802. 22. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE 802. 22. Patent Policy and Procedures: The contributor is familiar with the IEEE 802 Patent Policy and Procedures http: //standards. ieee. org/guides/bylaws/sb-bylaws. pdf including the statement "IEEE standards may include the known use of patent(s), including patent applications, provided the IEEE receives assurance from the patent holder or applicant with respect to patents essential for compliance with both mandatory and optional portions of the standard. " Early disclosure to the Working Group of patent information that might be relevant to the standard is essential to reduce the possibility for delays in the development process and increase the likelihood that the draft publication will be approved for publication. Please notify the Chair Carl R. Stevenson as early as possible, in written or electronic form, if patented technology being developed Submission 1 (or technology under patent application) might be incorporated into a draft standard Huawei within the IEEE 802. 22 Working Group. If you have questions, contact the IEEE Patent Committee Administrator at patcom@iee. org. >

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 Abstract • This proposal introduce a backup primary protecting device (BPPD) for communication devices offering enhanced protection for low-power, licensed devices operating in television broadcast bands. Submission 2 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 If a PPD stops transmitting abruptly… • If SPD misses a. Max. Missed. Beaconsecutive beacon frames, SPD will negotiate and find a SPD as new PPD. • The new PPD will enter the initial transmission period, for a period of 30 seconds. • But this negotiation and initial transmission period is a long time and can not protect Part 74 device timely. Submission 3 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 Proposed Solution • A backup primary protecting device (BPPD) – When PPD is working: • PPD will choose one or several SPD as BPPD, and assign different priorities for every BPPD; – When PPD doesn’t work : • the BPPD with the highest priority (main BPPD) will promote itself to new PPD immediately; • BPPD with other priorities (subordinative BPPD) will increase respective priorities, and the BPPD with the highest priority in subordinative BPPD will promote itself to new main BPPD immediately. Submission 4 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 How to choose BPPD? (1/4) • The support of the next higher layer (NHL): – Add a primitives of MLME-BPPD. Request, NHL request MLME to choose BPPD MLME-BPPD. Indication, MLME to NHL with the address of chosen BPPD MLME-BPPD. Confirm, NHL to MLME, confirm the chosen BPPD Submission 5 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 How to choose BPPD? (2/4) MLME-BPPD. request parameters Type Valid range Description Integer 0 -1 0：choose BPPD based on method 0, that is choose the first SPD that transmit beacon after received indication 1：reserved Name Status MLME-BPPD. indication parameters Type Valid range Description Name SPD Address the address of SPD MLME-BPPD. confirm parameters Type Valid range Description Integer 0 -1 1：choose the received SPD as BPPD 0：don’t choose the received SPD as BPPD Name Status Submission 6 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 How to choose BPPD? (3/4) • When PPD received the first beacon frame of SPD after indication from the next higher layer, PPD can choose this SPD as BPPD and memorize its Source Address. – Add a BPPD Address in beacon frame to notify BPPD’s identity to SPD, BPPD Address is zero before PPD choose BPPD; – Add a BPPD Priority in beacon frame to notify BPPD’s Priority. The Priority of the first BPPD can be set as 1, and the second BPPD can be set 2, etc. Submission 7 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 How to choose BPPD? (4/4) New Beacon frame format Octets: 1 6 Parameter Source 1 Address 8 6 1 1 5 6 Location Timestamp Parameter Sub channel BPPD 2 3 Map Address MHR 1 n 16 BPPD Priority Frame Payload Message Integrity Code MAC payload MFR BPPD Priority format Submission BPPD Priority Description 0000 Don’t choose BPPD 0001 The first priority 0010 The second priority 0011 The third priority …… etc 8 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 How to work? • PPD is working, but BPPD dies • PPD dies, but BPPD is working • Both PPD and BPPD die Submission 9 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 PPD is working, but BPPD dies… • BPPD ANP was inserted between Rx period and ANP, and the length is 2 bits • Main BPPD can notify whether it is active or not by this BPPD ANP period New Superframe format Sync Submission N Sync … 0 Beacon Rx period BPPD ANP Description 00 BPPD will cease transmission in the next superframe 11 BPPD is active 01, 10 reserved 10 BPPD ANP Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 PPD is working, but BPPD dies… • • If PPD and subordinative BPPD received 00 in the BPPD ANP period: – Main BPPD will cease transmission in the next superframe; – If there is subordinative BPPD: • The subordinative BPPD will increase respective priorities. The BPPD with the highest priority in subordinative BPPD will promote itself to new main BPPD immediately, and transmit BPPD burst in the next frame. • If the first subordinative BPPD also doesn’t work, the second subordinative BPPD will promote itself to new main BPPD immediately, etc. – If there is no subordinative BPPD: • the PPD need to re-choose a BPPD. If PPD and subordinative BPPD misses a. Max. Missed. BPPD consecutive BPPD burst: – PPD and subordinative BPPD will considered that main BPPD doesn’t work; – The same process as above situation; – The default value of a. Max. Missed. BPPD is 2. Submission 11 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 PPD dies, but BPPD is working… • • If PPD notify BPPD and SPD that it is planning to cease transmission by Cease Tx : – Main BPPD will promote itself to new PPD in the next superframe; – The subordinative BPPD will increase respective priorities. The BPPD with the highest priority in subordinative BPPD will promote itself to new main BPPD. If PPD don’t set Cease Tx to one and BPPD misses a. Max. Missed. PPD consecutive beacon frame: – Main BPPD will consider that this PPD does not work; – The same process as above situation; – The default the period of superframe is 8*(383*3+55)/9609 = 1. 002394 s – So the default value of a. Max. Missed. PPD can be one. Submission 12 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 Both PPD and BPPD die… • • This situation may be occurred by: – PPD dies, in the next a. Max. Missed. PPD consecutive superframe main BPPD also dies; – Main BPPD dies, in the next a. Max. Missed. BPPD consecutive superframe PPD also dies; The above situation can be summarized : – If SPD misses a. Max. Missed. Beaconsecutive beacon frame, SPD will consider that both PPD and main BPPD do not work • if there is subordinative BPPD, the BPPD with the highest priority in subordinative BPPD will promote itself to new PPD immediately, and the remainder BPPD will increase respective priorities; • if there is no subordinative BPPD, SPD will negotiation and find a new PPD, after that perform initial transmission period. • a. Max. Missed. Beacons can be set as MAX(a. Max. Missed. PPD， a. Max. Missed. BPPD)＋1 Submission 13 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 Simulation (1/5) • In this simulation, the relation of the average re-initialization time and probability of stop working, the number of BPPD, a. Max. Missed. PPD were shown. • The probability of stop working is the probability that a protect device stops transmitting abruptly. Submission 14 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 Simulation (2/5) • • Average re-initialization time with different probability of protect device stop working, the number of BPPD is 2, a. Max. Missed. PPD is 1. In draft, this time is about 31 second. Submission 15 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 Simulation (3/5) • • • Submission Average reinitialization time with different number of BPPD, the probability of stop working is 0. 05, a. Max. Missed. BPPD is 2, a. Max. Missed. PPD is 1. In draft, this time is about 31 second. So we can define the default number of BPPD is 2. 16 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 Simulation (4/5) • • Submission Average reinitialization time with different a. Max. Missed. BPPD, the number of BPPD is 2, the probability of stop working is 0. 05, a. Max. Missed. PPD is 1. In draft, this time is about 31 second. 17 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 Simulation (5/5) • • Submission Average reinitialization time with different a. Max. Missed. PPD, the number of BPPD is 2, the probability of stop working is 0. 05, a. Max. Missed. BPPD is 2. In draft, this time is about 31 second. 18 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 Conclusion • Our proposal can basically avoid negotiation and initial transmission period of 30 seconds, and ensure protection of Part 74 device. Submission 19 Huawei

doc. : IEEE 802. 22 -06/0008 r 1 Nov. 2006 References • [1] Motorola “Part 22. 1: Enhanced Protection for Low Power Licensed devices Operating in TV Broadcast Bands”. Submission 20 Huawei