Cisco Unity Connection Readonly CLI April 2016 2015

Cisco Unity Connection Read-only CLI April 2016 © 2015 Cisco System Inc. All rights reserved EDCS -1562255 Cisco Confidential 1

Notice The information in this presentation is provided under Non. Disclosure agreement and should be treated as Cisco Confidential. Under no circumstances is this information to be shared further without the express consent of Cisco. Any roadmap item is subject to change at the sole discretion of Cisco, and Cisco will have no liability for delay in the delivery or failure to deliver any of the products or features set forth in this document. © 2015 Cisco System Inc. All rights reserved Cisco Confidential 2

• CLI – Command Line Interface • CUC – Cisco Unity Connection © 2015 Cisco System Inc. All rights reserved Cisco Confidential 3

v Introduction v Configuration v Demo v References © 2015 Cisco System Inc. All rights reserved Cisco Confidential 4

. © 2015 Cisco System Inc. All rights reserved Cisco Confidential 5

With 11. 5 and later releases, Read-only CLI feature is introduced, where an OS admin user account created with privilege level 0: • Will not have permission for any write operation. • Can only run CLI commands performing read operation. © 2015 Cisco System Inc. All rights reserved Cisco Confidential 6

OS user accounts can be created with either: • Privilege level 0: Specifies an ordinary privilege level where user can run only CLI commands assigned for level 0. • Privilege level 1: Specifies an advanced privilege level where user can run CLI commands assigned for level 1 and below. Note: Prior to 11. 5, the privilege level were not categorized based on readwrite operation. A user with privilege level 0 could perform both read and write operation. © 2015 Cisco System Inc. All rights reserved Cisco Confidential 7

. © 2015 Cisco System Inc. All rights reserved Cisco Confidential 8

• admin: set account name <name> Note: Here ‘name’ represents the username for the new Read-Only admin account • The command gives the following prompt: Privilege Levels are: Ordinary - Level 0 Advanced - Level 1 Please enter the privilege level : …. . • Type 0 to create a read-only user with privilege level 0. • Type in the password. • Account gets created successfully. © 2015 Cisco System Inc. All rights reserved Cisco Confidential 9

. © 2015 Cisco System Inc. All rights reserved Cisco Confidential 10

Prerequisite: OS admin user Tom is created with privilege level 0 Case 1: User Tom login (Read-only user) into CUC via CLI and executes CLI commands, Command privilege level CLI Command Accessible privilege level 0 show myself Yes show cuc version Yes set accountlocking count No set cli session timeout No privilege level 1 © 2015 Cisco System Inc. All rights reserved Cisco Confidential 11

Prerequisite: OS admin user Adam is created with privilege level 1 Case 2: User Adam login (Privileged user) into CUC via CLI and executes CLI commands, Command privilege level CLI Command Accessible privilege level 0 show myself Yes show cuc version Yes set accountlocking count Yes set cli session timeout Yes privilege level 1 © 2015 Cisco System Inc. All rights reserved Cisco Confidential 12

• Command Line Interface Guide : http: //www. cisco. com/c/en/us/td/docs/voice_ip_comm/cucm/cli_ref/11_0_1/CUC M_BK_C 93262 BC_00_cucm-cli-reference-guide-1101. html © 2015 Cisco System Inc. All rights reserved Cisco Confidential 13

Thank you. © 2015 Cisco System Inc. All rights reserved Cisco Confidential 14