Permits Web Innovations 2017 Permit to work What

Permits Web Innovations 2017

Permit to work What is it? What does it do? How CHAMPS Permits can help?

What is a PTW system? It is the formalization of the procedures used to control certain types of potentially hazardous work. It is also a means of communication between permit issuers, plant supervisors, operators and those who carry out work. The end goal is to consider all possible hazards and plan accordingly.

OSHA 29 CFR (Code of Federal Regulation) PART 1910 & PART 1926 • Contains standards for permitrequired conditions • Outlines the minimum • Supports job safety analysis. • Confined spaces • • Two standards (Construction & General Industry) Is the only employer issued permit that OSHA requires Osha. gov / Accessed 01 -09 -17 • State permit requirements vary

Other common permits • • • Hot work Work at heights Excavation Scaffolding Hazardous material • • • Hoisting Diving Radiation Electrified systems Fire hazard • Asbestos, Lead, etc OSHA has standards for all of these topics

What does it do? Trains • Personnel involved should understand the procedures involved in the PTW system including work suspension, shift changes etc. • Personnel using devices and safety equipment should be trained in the use of those devices. Ex. harness, respirator etc. Identifies • All potential hazards related to work to be performed at a specific location and time. • PPE, emergency plans, related permits, isolations, MSDS, monitoring devices and calibration dates. Records • All of the above data in a centralized document that can be displayed and shared with a work party and other need to know personnel. • The monitoring of conditions throughout the work process. • Period of permit validity • Authorization signatures • Permit close out

How CHAMPS Permits can help… CHAMPS records all of this and provides organization and the ability to create relationships between your permits, assets and the work documents effected by them.

Because, if you didn’t document it… It didn’t happen! • It didn’t happen!

Flow Permit Work. PM Order Permit Template Permit Work Order Equipment Permit Template Permit Manual / On demand Work Order Permit Template

Permit Templates Will be displayed on equipment, work order tasks/steps and PM task/steps where this template is associated. Signifies that permits created from this template will have a condition present that requires constant monitoring. Ex. Gas levels. Will be displayed on equipment, work order tasks/steps and PM task/steps where this template is associated. Indicates that this permit template was approved by a CHAMPS Permit user that has the “Permit Approver” system role.

Permit Templates – Details tab For every facility/industry having different needs and wanting to control exactly how permits are laid out this text editor provides an opportunity to create custom permits It is also easy to just paste in templates from a word document or from the OSHA website. https: //www. osha. gov/pls/osh aweb/owadisp. show_document ? p_table=STANDARDS&p_id=98 01

Permits You can set the expiration date as far out as you would like but 24 hours is most common The permit issuer and holder are listed here along with there contact phone number.

Permits – Associated Documents tab Displays the work order task(s)/step(s) that are using this permit.

EQ, PM Task, WO Task Safety tabs WO Task, PM Task and EQ all contain a Safety tab similar to this one. Templates saved to an EQ will be carried over when creating a PM and eventually to any WO created from the PM. This section is empty until a permit is added via the “Add” button. In order to appear in the selection only permits that are in a WF state of “Open” and have been approved will appear.