X-Ray Scanning Technology (Mostly the software end of things) By: Zuzana Srostlik Advisor: Alan Rudge Through Ohio State and CERN
The Hardware FIFO DETECTOR DISPLAY (ARA 1 -4) COMPUTER LED RESET MICROCHIP USB PORT
The Software: not connected USBtest – DLL V 2. 2 DLP Design Open by: Search Description Serial Number Dev # 0 Description and Serial Numbers are Case Sensitive! STATUS Open 0 0 0 No device connected. No. of Frames New Trial Low Discriminator (0 to 255) High Discriminator (0 to 255) No devices found. EXIT Send Info
The Software: connected USBtest – DLL V 2. 2 DLP Design Open by: Search Description Serial Number Dev # 0 Description and Serial Numbers are Case Sensitive! STATUS Open DLPXXXXX ready. No. of 4 110 255 Frames New Trial Low Discriminator (0 to 255) High Discriminator (0 to 255) Devices found: 0 10 0 X 09 EXIT Send Info
How Signals Look (with source) Background Radioactive source Signals not strong enough to pick up
What I Still Have To Do • Figure out why device causes software to spew hex info into GUI edit boxes • Then redirect hex info into dec info into a file • With new file, create graphical output (like previous graph) • Then possibly: Test lots of different sources
How This Matters • Helps create faster X-ray imaging
The End Thanks to: NSF, Ford, University of Michigan, CERN