TV 40 52 GIANT Wood Chipper TV 40

TV 40 -52 GIANT

Wood Chipper TV 40 -52 GIANT Driven by the PTO of the tractor Extremely big & heavy machine, suited for tractors from 155 HP up to 400 HP Weight of the standard machine: 4. 200 kg Adapted for crane feeding only All main functions are completely radio remote controlled from inside the crane / tractor cabin, with spare battery + charger 12 V The TV 40 -52 is unique in its kind because : • Simple maintenance • No sharpening of the knives required ! • Meets all safety regulations • Standard equipped with Thungsten-carbide knives and counter knives in sections. Sections are easlily replaceable • Renders sharpening and adjusting of the knives superfluous. • Extreme long life span • Noise reduced chipper disk, integrated in a long wearing housing • Direct power linkages, no belts or chain drives • Very big capacity

Basic machine Knife disc 1360 mm, equipped with 2 knives in carbide tungsten Counter knife in carbide tungsten PTO shaft revolutions: 1000 RPM PTO shaft end on the main axle: 1” ¾ Rotations of the knife disc: 1000 RPM Hydraulically driven infeed rolls with built in pump group, start – stop coupling and chip size regulation from 1 to 25 mm High ejection chute: 3, 7 m high, 360° hydraulically revolving, with electrical operated ejector flap (ejection system completely remote controlled) Ejection chute is hydraulically foldable with a hand pump Maximum capacity round wood : 400 mm Opening between feeding rolls: 520 mm x 400 mm Anti-stress system SPECIAL ADVANCED included Noise reducing coating 3 -point hitch Cat. III en IV Equipped with free wheel PTO, type W 2600 Centralized greasing of the lower infeed roll and the main axle bearings Hydraulic automatic dampener (against dropping) of the upper infeed roll. Upper infeed roll can be lifted with remote control (or with hand pump) Top protection hood above the knife disc opens and closes with a hand pump. Built in lights (protected) Machine = frame in super elastic steel quality Comes standard with a chain conveyor belt Weight basic machine : 4. 500 kg

VANDAELE KONSTRUKTIE NV Stationsstraat 119 B-8780 Oostrozebeke (Belgium) Tel : +32 56 66 45 01 Fax : +32 56 67 24 92 sales. export@vandaele. biz www. vandaele. biz