Automotive Training Equipment Lighting and signalling training stand

Automotive Training Equipment Lighting and signalling training stand, which includes a basic electrical circuit with built-in element measuring Contacts YESA-4402 LT Feature & Specification Description: Functional illumination and signalling system installed on the mobile frame construction. The stand includes the original parts of the car. The training stand should provide possibility to made training on at least the structure of the automotive lighting and signalling system, its components, operating modes, and the performance of measurement and test diagnostic procedures on it. Technical specifications and functions - stand should include a basic electrical circuit – with built-in element measuring contacts; -stand provide the possibility of adjusting the level of the car's headlamp on the stand. Diagnostic and measurement Oscilloscope/multimeter - Ability to measure any electrical signal parameters of system component; Control unit (EVB) diagnostics and minimal functions: - Diagnosis through EOBD (J 1962) 16 – pin diagnostic connector; - Control unit identification; - fault codes reading / erasing; - Monitoring the operating system parameters; - Activating the actuators; Other parameters -The stand has a closed structure–no visible system installation elements and sealed electrical circuits, wirings; - Power supply: 12 V accumulator battery and should be included power supply block for 220 V / 12 V conversion *Note. Image, specification and model No. of equipment can be changed by manufacturing process without special reporting. YES 01, Youngil Education System 1 www. yes 01. co. kr/en Tel : 82 -2 -2024 -0077