AUTOMATED INSPECTION Part 1 Inspeksi Otomatis Automated inspection
- Slides: 8
AUTOMATED INSPECTION (Part 1)
Inspeksi Otomatis • Automated inspection : Otomasi pada satu atau lebih tahapan dalam prosedur inspeksi. • Beberapa alternatif yang dapat diimplementasikan: 1. Automated presentation of parts by an automatic handling system with a human operator still performing the examination and decision steps. 2. Automated examination and decision by an automatic inspection machine, with manual loading (presentation) of parts into the machine. 3. Completely automated inspection system in which parts presentation, examination, and decision are all performed automatically.
Tempat dan Saat Inspeksi • Inspeksi pada beberapa tempat dalam kegiatan produski: 1. Receiving inspection, when raw materials and parts are received from suppliers. 2. At various stages of manufacture, and 3. Before shipment to the customer.
Off-Line and On-Line Inspection • Saat inspeksi terkait dengan manufacturing process merupakan pertimbangan penting dalam quality control. • Dua alternatif inspeksi: 1. Off-line inspection. 2. On-line inspection.
Off-Line Inspection • Diluar manufacturing process, dan terdapat time delay antara processing dan inspection. • Pada umumnya menerapakn manual inspection.
On-Line Inspection • Inspeksi dilakukan ketika part-part dibuat: q An integral step in the processing or assembly operation, or q Immediately afterward. • Dua on-line inspection procedures: q On-line/in-process. q On-line/post-process.
On-Line/ in-process Inspection • The is achieved by performing the inspection procedure during the manufacturing operation. • As the parts are being made, the inspection procedure is measuring or gaging the parts simultaneously. • Technologically, automated on-line/in-process inspection of the product is usually difficult and expensive to implement, As an alternative, on-line/ post-process procedures are often used.
On-Line/ post-process Inspection • The measurement or gaging procedure is accomplished immediately following the production process. • Even though it follows the process, it is still considered an online method because it is integrated with the manufacturing workstation, and the results of the inspection can immediately influence the production operation of the next part.
