Update Genuine MercedesBenz accessories Christina Gousetis MBAATP 26
Update - Genuine Mercedes-Benz accessories Christina Gousetis (MBA/ATP) 26. 11. 2013 Mercedes-Benz Accessories Gmb. H A Daimler Company
NTG 5: Media Interface cables Designed to connect consumer end devices to the USB-based (Code 518) in vehicles with NTG 5 • • • Media Interface Set consisting of 3 USB adapter cables (A 222 820 2600): 1) USB to micro USB 2) USB to i. Phone® (30 -pin adapter) up to i. Phone 4 S, i. Pod touch gen. 4, i. Pod nano gen. 6 3) USB to i. Phone® (Lightning adapter) from i. Phone® 5, i. Pod touch gen. 5, i. Pod nano gen. 7 Cable length: approx. 20 cm Cables also available separately Please note: i. Pod®/i. Phone® - adapter cable – no video transmission or display of pictures In conjunction with Audio 20 CD or COMAND Online the functionality of Media Interface will come as a standard for C-Class (W 205) and all new model series with NTG 5. The optional extra Code 518 simply consists of the USB adapter cable set. Until further Media Interface must be ordered as an optional extra for the S-Class. The accompanying USB adapter cables are sold separately via After Sales. 2
NTG 5: Bluetooth® (SAP) telephone module, V 4 In addition to the wireless connection via Bluetooth®, NTG 5 with Convenience Telephony also offers the option of connecting a Bluetooth® (SAP) telephone module, Version 4, to the USB port to access the internet, achieving faster connection speeds. (approx. 7 x faster than wireless connection via Bluetooth®) Please note that this requires, at a minimum software version E 27 Newly delivered devices already have the required software status nr. : Factory-fitted: A 212 906 5302; After Sales: A 212 906 6303 consisting of telephone module A 212 906 5302 and manual kit Part Devices with an older software status (see label on back of module) can be updated*. The software – along with instructions – can be downloaded at www. mercedes-benz. com/connect The USB to micro USB cable for use in conjunction with the telephone module is supplied with the optional extra (Code 379) and can also be purchased via After Sales. Part nr. : A 222 820 5115 - 320 mm length resp. A 222 820 5215 - 500 mm length 3 * Update can take up to 15 minutes
NTG 5: Garmin® MAP PILOT Ordering possibilities Audio 20 CD NTG 5 (display size: 17. 8 cm) Factory-fitted and via After Sales Via After Sales Pre-wiring for Garmin® MAP PILOT Garmin® SD card Code 357: Pre-wiring and Garmin® SD card Code 355: Pre-wiring, Factory-fitted Garmin® SD card via After Sales* Retrofit of Pre-wiring, Code 355 Garmin® SD card via After Sales* Voll integriertes Navigationssystem aus Basis Audio 20 *for alle markets available via standard ordering process In Germany and UK also available via Mercedes-Benz Online Shop http: //shop. mercedes-benz. com 4
Tablet docking station for factory-fitted pre-wiring New plug & play solution for pre-wiring Rear Seat Entertainment System, Code 866 Factory-fitted: Pre-installation in seat, incl. 12 V power supply (Code 866) After Sales: Mount and Pad® cradles available for connection to pre-installation Android-based tablets currently in testing Available for: W/S/V 205 from Q 1/2015 Optional extra After Sales factory-fitted, Code 866 accessory „Slot“ as part of Code 866 Pre-installation 5 Mount i. Pad® / tablet cradle
New carrier systems „Aerostyle“ Carrier bars „Aerostyle“ are available for all new model series (except X 117 and VS 20) from 2014 Highlights Fixation of end caps via clamp system to prevent loss End caps with attachment 3 -point Asymmetric and noiseoptimised aero profile Integrated sliding roof stoppers made of hard rubber on front bar Fig. Basic carrier bars „Aerostyle Easy-Fix“ for vehicles with roof rails Please note: The use of the bicycle rack New Alustyle in conjunction with the new carrier bars “Aerostyle” requires an adapter which is available separately via After. Sales. 6 Handwheel for tool-free fitting (only for roof rails) Rubber protected tightening claws All other genuine Mercedes-Benz roof structures (e. g. roof box) can be fitted without an adapter.
New carrier systems „Aerostyle“ Asymmetrical aero section (based on aircraft aerofoil) for further optimisation of aerodynamics and noise reduction Fitting mechanism: → Aerostyle Easy-Fix basic carrier bars for roof rails → Width-fixing and attachment mechanism – bars are attached to vehicle’s roof rails by jaws → Secured by tightening integral handwheel → Bar can be heard and felt clicking into place, confirming correct attachment → See relevant fitting instructions for correct positioning of basic carrier bars rubber-protected clamping → Aerostyle basic carrier bars → Fixed to designated points in roof channel using M 8 screws → Following initial assembly (width tolerance adjustment), bars can be fitted in next to no time without the use of tools, thanks to easy-to-use fastening mechanisms
New add-on parts „Carbon Style“ Add-on parts in realistic carbon design for an individual, sporty and dynamic look Planned add-on parts C 117 Front apron spoiler lip 1 -piece Fitting: special adhesive tape and mechanical fittings Rear spoiler 1 -piece Fitting: special adhesive tape Exterior mirror covers Set of 2 Fitting: special adhesive tape No painting necessary - product ready for fitting; does not need to be entered in the vehicle documents → Material: Polycarbonate, which is printed using the silk-screen method and deep-drawn subsequently → 3 D effect in realistic carbon look → Material properties: impact resistant, UV- and weatherproof 8 W 205* * Add-on parts „Carbon Style“ for W 205 approx. available Q 2/2015 *Add-on parts „Carbon Style“ for W 205 approx. available Q 2/2015 See also http: //sport. mercedes-benz. com
Introduction of automatic front passenger airbag deactivation Optional extra automatic child seat recognition is gradually being phased out. Starting from the launch of the new GLA-Class (X 156) it will be replaced in all new vehicles (and facelifts) by a new system, “automatic front-passenger airbag deactivation”. The process of switching to the new system is expected to take until 2018. Unlike the previous magnetic field-based system, which used transponders, the new, capacitive system recognises a child seat by the weight and pressure distribution on the seat. Please note… …that genuine Mercedes-Benz child seats with integral transponder will remain part of our range for vehicles with automatic child seat recognition, Code U 12. Child seats without transponder will also be available for use with the new system. Exception: the BABY-SAFE plus II will continue to be offered exclusively with automatic child seat recognition. 9
Head Up Display (retrofit accessory) Retractable and adjustable combiner screen mounted on dashboard → Displayed information (data supplied via CAN bus): − − − Basic information (e. g. velocity, turn signal etc. ) Display cruise control, limiter etc. Turn-by-Turn navigation instructions Display of drivers assistance systems info (traffic signs, distance warning etc. ) Display of radio station and song info (under investigation) Technical data Planned models series Oo → Operation via mulitfunction steering wheel and dedicated „Head Up Display“ menu in instrument cluster → Automatic day/night mode including adjustment of brightness (manual setting possible) → Available via After Sales, offer ex factory under investigation 10 X 204, W/X 166, W/S 212, C/X 218 Only USA/Ro. W: C 117, X 156 Market launch Gradually from Q 2/2014 Installation time approx. 1, 5 h Size virtual image 120 x 30 mm Distance virtual image approx. 1800 mm Image source 1, 8“ TFT Display Resolution Xxx 256 x 128 Pixel (HD) Colour depth >200, 000 colours
- Slides: 10