Understanding Maps cont Maps have two features to

  • Slides: 41
Download presentation
Understanding Maps (cont. ) Maps have two features to help you read and understand

Understanding Maps (cont. ) Maps have two features to help you read and understand the map: a series of symbols called a map legend, and a ratio, which establishes the map scale.

Understanding Maps (cont. ) A map legend is a key that lists all the

Understanding Maps (cont. ) A map legend is a key that lists all the symbols used on the map that help you interpret the symbols. map legend

Understanding Maps (cont. ) legend Science Use part of a map that explains the

Understanding Maps (cont. ) legend Science Use part of a map that explains the map symbols Common Use a story coming down from the past

Understanding Maps (cont. ) Model builders typically use scale to make the model measurements

Understanding Maps (cont. ) Model builders typically use scale to make the model measurements accurate to the measurements of the real object.

Understanding Maps (cont. ) A map scale is the relationship between a distance on

Understanding Maps (cont. ) A map scale is the relationship between a distance on the map and the actual distance on the ground.

Reading Maps • Long ago, mapmakers created a grid system of two sets of

Reading Maps • Long ago, mapmakers created a grid system of two sets of imaginary lines, called longitude and latitude, which encircle Earth. • Mapmakers started the grid system with a vertical line that circled Earth and passes through the North Pole and the South Pole.

Reading Maps (cont. ) • The half of this vertical circle that passes through

Reading Maps (cont. ) • The half of this vertical circle that passes through Greenwich, England, is known as the prime meridian. • The other half of this vertical circle is the 180° meridian.

Reading Maps (cont. ) Similar circles are drawn at every degree east and west

Reading Maps (cont. ) Similar circles are drawn at every degree east and west of the prime meridian. These lines are referred to as lines of longitude from Latin longitudo, means “length”

Reading Maps (cont. ) • A location’s longitude is the distance in degrees east

Reading Maps (cont. ) • A location’s longitude is the distance in degrees east or west of the prime meridian. • The prime meridian and the 180° meridian divide Earth into the Eastern Hemisphere and the Western Hemisphere.

Reading Maps (cont. ) The lines east of the prime meridian are called east

Reading Maps (cont. ) The lines east of the prime meridian are called east longitude, and the lines west of the prime meridian are called west longitude.

Reading Maps (cont. ) • Mapmakers also drew horizontal lines from east to west

Reading Maps (cont. ) • Mapmakers also drew horizontal lines from east to west around Earth. The equator is the center and largest circle of these horizontal lines. • The equator divides Earth into the Northern Hemisphere and the Southern Hemisphere.

Reading Maps (cont. ) • Parallel circles are drawn at every degree north and

Reading Maps (cont. ) • Parallel circles are drawn at every degree north and south of the equator. These lines are referred to as lines of latitude. • The North Pole and the South Pole are each indicated by a dot at 90° N and 90° S. • A location’s latitude is the distance in degrees north or south of the equator.

Reading Maps (cont. ) Together, longitude and latitude are used to pinpoint a location

Reading Maps (cont. ) Together, longitude and latitude are used to pinpoint a location on Earth.

Reading Maps (cont. ) What relationship do lines of longitude and lines of latitude

Reading Maps (cont. ) What relationship do lines of longitude and lines of latitude have?

Plotting Locations • Any location on Earth can be described by the intersection of

Plotting Locations • Any location on Earth can be described by the intersection of the closest line of latitude and the closest line of longitude. • Because longitude and latitude lines are far apart, we divide each degree into 60 minutes (') and each minute into 60 seconds (") to help pinpoint locations.

Plotting Locations (cont. ) How do latitude and longitude describe a location on Earth?

Plotting Locations (cont. ) How do latitude and longitude describe a location on Earth?

 • Finding locations on a map or a globe can be done accurately

• Finding locations on a map or a globe can be done accurately by using grid lines called longitude and latitude.

What do model builders use to make model measurements accurate to the measurements of

What do model builders use to make model measurements accurate to the measurements of the real object? A. size C. scale B. weight D. legend

Which of these terms refers to the distance in degrees north or south of

Which of these terms refers to the distance in degrees north or south of the equator? A. longitude B. latitude C. scale D. ratio

Types of Maps A topographic map shows the detailed shapes of Earth’s surface, along

Types of Maps A topographic map shows the detailed shapes of Earth’s surface, along with its natural and human-made features. topography from Greek topos, means “place”; and graphein, means “to write”

Types of Maps (cont. ) A topographic map helps give you a picture of

Types of Maps (cont. ) A topographic map helps give you a picture of what the landscape looks like without seeing it. Robert Glusic/Getty Images

Types of Maps (cont. ) • The height above sea level of any point

Types of Maps (cont. ) • The height above sea level of any point on Earth’s surface is its elevation. • The difference in elevation between the highest and lowest point in an area is called relief.

Types of Maps (cont. ) Contour lines are lines on a topographic map that

Types of Maps (cont. ) Contour lines are lines on a topographic map that connect points of equal elevation.

Types of Maps (cont. ) • The elevation difference between contours that are next

Types of Maps (cont. ) • The elevation difference between contours that are next to each other is called the contour interval. • Slope is a measure of the steepness of the land.

Types of Maps (cont. ) • If the contours are spaced far apart, the

Types of Maps (cont. ) • If the contours are spaced far apart, the slope is gradual or flat, but if the contours are close together, the slope is steep. • The information contour lines provide on a topographic map can be used to draw an accurate profile of the topography.

Types of Maps (cont. ) What can you learn about the features at Earth’s

Types of Maps (cont. ) What can you learn about the features at Earth’s surface from studying contour lines?

Making Maps Today (cont. ) The Global Positioning System (GPS) is a group of

Making Maps Today (cont. ) The Global Positioning System (GPS) is a group of 24 satellites orbiting Earth used for navigation.

Making Maps Today (cont. ) • The signals relayed by GPS satellites are used

Making Maps Today (cont. ) • The signals relayed by GPS satellites are used to calculate the distance to the satellite based on the average time of the signal. • GPS is used by mapmakers to accurately locate reference points.

Making Maps Today (cont. ) • Geographic Information Systems (GIS) are computerized information systems

Making Maps Today (cont. ) • Geographic Information Systems (GIS) are computerized information systems used to store and analyze map data. • GIS creates different map layers of the same location using database view, map view, and model view.

 • Topographic maps use contour lines to help describe the elevation and relief

• Topographic maps use contour lines to help describe the elevation and relief of the surface of Earth at that spot.

 • Geologic maps are useful in determining the kind of rocks, the age

• Geologic maps are useful in determining the kind of rocks, the age of rocks, and the formations they are found in for an area.

What is the height above sea level of any point on Earth’s surface called?

What is the height above sea level of any point on Earth’s surface called? A. slope B. contour interval C. elevation D. cross section

Which term refers to the process of collecting information about an area without coming

Which term refers to the process of collecting information about an area without coming into physical contact with it? A. navigation B. mapping C. modeling D. remote sensing

Which of these refers to the distance in degrees east or west of the

Which of these refers to the distance in degrees east or west of the prime meridian? A. latitude B. longitude C. scale D. time zone

What is the difference in elevation between the highest and lowest point in an

What is the difference in elevation between the highest and lowest point in an area is called? A. slope B. topography C. relief D. elevation

What feature of a topographic map connects points of equal elevation? A. contour lines

What feature of a topographic map connects points of equal elevation? A. contour lines B. cross sections C. contour intervals D. geologic maps

Which term refers to the elevation difference between contours that are next to each

Which term refers to the elevation difference between contours that are next to each other? A. slope B. contour interval C. steepness D. relief

Which term refers to the key that lists all the symbols used on the

Which term refers to the key that lists all the symbols used on the map to help you interpret the symbols? A. map key B. map scale C. profile view D. map legend

What is the center line of latitude? A. prime meridian B. longitude C. equator

What is the center line of latitude? A. prime meridian B. longitude C. equator D. legend

Which term is a measure of the steepness of land? A. contour B. slope

Which term is a measure of the steepness of land? A. contour B. slope C. elevation D. topography

Which term refers to the elevation difference between contours that are next to each

Which term refers to the elevation difference between contours that are next to each other? A. the Geographic Information System B. sonar C. the Global Positioning System D. the contour interval