Tutorial Drawings Chapter 2 Dr Simin Nasseri SPSU

Choose a Paper Size/Format Leave Unchecked for Plain Sheet Dr Simin Nasseri, SPSU INTRODUCTION

Set Units • Units can be different from those of parts • Units can

Third-Angle Projection • Typical for most U. S. drawings TOP FRONT Dr Simin Nasseri,

Importing Dimensions • Dimensions are linked to part values • Automatically –imported dimensions can

Section View • Defined by a line through the part Dr Simin Nasseri, SPSU

Detail View • Allows small features to be more easily dimensioned Dr Simin Nasseri,

Tolerances • Many dimensions have their tolerances defined by the default tolerances of the

Geometric Tolerances • Geometric tolerances are often added to define requirements beyond dimensional tolerances.

Finished Drawing • With title block and note Dr Simin Nasseri, SPSU INTRODUCTION TO

e. Drawings • e. Drawings can be shared with other users without having to

Slides: 11

Download presentation

Tutorial: Drawings Chapter 2 Dr Simin Nasseri, SPSU Copyright of Howard and Musto, 2009 Dr Simin Nasseri, SPSU

Choose a Paper Size/Format Leave Unchecked for Plain Sheet Dr Simin Nasseri, SPSU INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

Set Units • Units can be different from those of parts • Units can be changed at any time; all dimensions will be converted to the new unit system Dr Simin Nasseri, SPSU INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

Third-Angle Projection • Typical for most U. S. drawings TOP FRONT Dr Simin Nasseri, SPSU RIGHT INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

Importing Dimensions • Dimensions are linked to part values • Automatically –imported dimensions can be moved between drawing views as desired Dr Simin Nasseri, SPSU INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

Section View • Defined by a line through the part Dr Simin Nasseri, SPSU INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

Detail View • Allows small features to be more easily dimensioned Dr Simin Nasseri, SPSU INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

Tolerances • Many dimensions have their tolerances defined by the default tolerances of the title block or a note • Individual tolerances can be defined for critical dimensions Dr Simin Nasseri, SPSU INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

Geometric Tolerances • Geometric tolerances are often added to define requirements beyond dimensional tolerances. In this case, the flatness of the back of the flange is specified Dr Simin Nasseri, SPSU INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

Finished Drawing • With title block and note Dr Simin Nasseri, SPSU INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

e. Drawings • e. Drawings can be shared with other users without having to share the associated part file • e. Drawings files are very small compared to SW part and drawing files • Users without Solid. Works can view e. Drawings with a free viewer • e. Drawings can also be sent as executable files containing the viewer Dr Simin Nasseri, SPSU INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009