Training Manual ANSYS Workbench Simulation Electromagnetics Training Manual
Training Manual ANSYS Workbench - Simulation Electromagnetics
Training Manual ANSYS Workbench – Simulation Electromagnetics Inventory Number: 002210 First Edition ANSYS Release: 9. 0 Published Date: March 4, 2005 Registered Trademarks: ANSYS® is a registered trademark of SAS IP Inc. All other product names mentioned in this manual are trademarks or registered trademarks of their respective manufacturers. Disclaimer Notice: This document has been reviewed and approved in accordance with the ANSYS, Inc. Documentation Review and Approval Procedures. “This ANSYS Inc. software product (the Program) and program documentation (Documentation) are furnished by ANSYS, Inc. under an ANSYS Software License Agreement that contains provisions concerning nondisclosure, copying, length and nature of use, warranties, disclaimers and remedies, and other provisions. The Program and Documentation may be used or copied only in accordance with the terms of that License Agreement. ” Copyright © 2005 SAS IP, Inc. Proprietary data. Unauthorized use, distribution, or duplication is prohibited. All Rights Reserved. March 4, 2005 Inventory #002210 TOC-2
ANSYS Workbench – Simulation Electromagnetics Table of Contents 2. Introduction 1 -1 A. Feature Overview 1 -2 B. Underlying Technology C. Enclosures 1 -4 D. Boundary Conditions E. Modeling Permanent Magnets F. Modeling Permanent Magnets G. Modeling Conductors Workshop 1 1 -3 1 -5 1 -6 1 -7 1 -8 2 -1 Creating Winding Bodies from Line Bodies 3. Workshop 2 3 -1 Electromagnetic Analysis of a 2 Gap Solenoid 4. Workshop 3 Winding Editor 5. Workshop 4 5 -1 Armature Gap Sweep 6. Workshop 5 Solid Conductor 7. Workshop 6 7 -1 Low Frequency Electromagnetic Analysis of Motors 4 -1 6 -1 ANSYS Workbench – Simulation Emag 1. Training Manual March 4, 2005 Inventory #002210 TOC-3
March 4, 2005 Inventory #002210 TOC-4
- Slides: 4