Training Manual 3 rd Edition ANSYS Workbench Simulation
Training Manual 3 rd Edition ANSYS Workbench Simulation Introduction
Training Manual ANSYS Workbench – Simulation Introduction Inventory Number: 002215 3 rd Edition ANSYS Release: 9. 0 Published Date: March 29, 2005 Registered Trademarks: ANSYS® is a registered trademark of SAS IP Inc. All other product names mentioned in this manual are trademarks or registered trademarks of their respective manufacturers. Disclaimer Notice: This document has been reviewed and approved in accordance with the ANSYS, Inc. Documentation Review and Approval Procedures. “This ANSYS Inc. software product (the Program) and program documentation (Documentation) are furnished by ANSYS, Inc. under an ANSYS Software License Agreement that contains provisions concerning non-disclosure, copying, length and nature of use, warranties, disclaimers and remedies, and other provisions. The Program and Documentation may be used or copied only in accordance with the terms of that License Agreement. ” Copyright © 2005 SAS IP, Inc. Proprietary data. Unauthorized use, distribution, or duplication is prohibited. All Rights Reserved. March 29, 2005 Inventory #002215 TOC-2
ANSYS Workbench – Simulation Introduction Table of Contents Introduction A. B. C. D. 2. 3. B. C. D. E. F. Launching Simulation Startup Panel 2 -13 Basic Procedure 2 -17 Workshop 2 – Simulation Basics Geometry Branch 3 -5 Contact 3 -14 Meshing 3 -33 Named Selections 3 -63 Coordinate Systems Workshop 3 – Mesh Control C. D. E. F. G. 1 -10 1 -24 F. 2 -3 D. 7. C. 8. E. F. G. H. I. 4 -1 Geometry 4 -4 Assemblies – Solid Body Contact 4 -9 Loads and Supports 4 -18 Workshop 4. 1 – Linear Structural Analysis 4 -36 Solution Options 4 -37 Results and Postprocessing 4 -41 Workshop 4. 2 – 2 D vs 3 D Analysis 4 -54 Free Vibration Analysis Procedure 5 -4 Workshop 5. 1 – Free Vibration 5 -16 Free Vibration with Pre-Stress Analysis 5 -17 Workshop 5. 2 – Prestressed Modal 5 -23 9. Background on Buckling Analysis Procedure Workshop 7 – Linear Buckling 6 -9 6 -34 6 -39 7 -1 7 -3 7 -8 7 -21 Results Postprocessing 8 -1 A. Viewing Results 8 -3 B. C. D. 3 -68 3 -71 6 -1 Geometry 6 -6 Assemblies – Solid Body Contact Loads 6 -21 Solution Options 6 -30 Results and Postprocessing Workshop 6 – Thermal Analysis Linear Buckling Analysis A. B. 2 -42 Free Vibration Analysis 5 -1 A. B. C. Thermal Analysis A. B. C. D. E. 2 -1 Static Structural Analysis A. B. 5. 6. General Preprocessing 3 -1 A. 4. About ANSYS, Inc. 1 -5 ANSYS Workbench Overview Starting Simulation 1 -20 Workbench Projects Simulation Basics A. B. C. D. 1 -1 Scoping Results 8 -19 Exporting Results 8 -24 Coordinates Systems & Directional Results 8 -27 Solutions Combinations 8 -29 Stress Singularities 8 -33 Error Estimation 8 -36 Convergence 8 -38 Workshop 8 – Advanced Results Processing 8 -48 CAD & Parameters 9 -1 A. CAD Interoperability B. C. D. Multiple Design Studies Parameter Manager 9 -42 Workshop 9 – Parameter Manager 9 -31 ANSYS Workbench – Simulation 1. Training Manual 9 -49 March 29, 2005 Inventory #002215 TOC-3
ANSYS Workbench – Simulation Introduction Table of Contents Harmonic Analysis A. B. C. D. E. 11. 10 -1 Harmonic Analysis Procedure Solving Harmonic Analyses Damping Input 10 -24 Request Harmonic Tool Results Workshop 10 – Harmonic Analysis Asynchronous Solution A. B. C. D. E. Asynchronous Solution Overview UNIX Server 11 -11 LSF Cluster 11 -14 Workbench Cluster 11 -17 ANSYS Product Table 10 -7 10 -15 10 -30 10 -39 11 -1 11 -3 Appendix A 12 - Fatigue Module A. B. C. D. E. F. G. H. I. Fatigue Overview A 12 -3 Constant Amplitude Loading Proportional Loading Stress Definitions A 12 -6 Stress Life Curves A 12 -7 Fatigue Procedure (Basic Case) Variable Amplitude Fatigue Non-Proportional Fatigue Workshop A 12– Fatigue Analysis A 12 -1 A 12 -4 A 12 -5 A 12 -11 A 12 -36 A 12 -49 A 12 -58 11 -20 Appendix A 13 - Shape Finder A 13 -1 Appendix A 3 - General Preprocessing A 3 -1 Appendix A 4 - Static Structural Analysis A 4 -1 Appendix A 5 - Modal Analysis A 5 -1 Appendix A 6 - Thermal Analysis A 6 -1 Appendix A 7 - Linear Buckling Analysis A 7 -1 Appendix A 10 – Harmonic Analysis A 10 -1 A. B. Shape Optimization Procedure Workshop A 13– Shape Finder A 13 -5 A 13 -18 ANSYS Workbench – Simulation 10. Training Manual March 29, 2005 Inventory #002215 TOC-4
- Slides: 4