THEMIS FM 4FM 5 INSTRUMENT SUITE PRESHIP REVIEW

  • Slides: 17
Download presentation
THEMIS FM 4/FM 5 INSTRUMENT SUITE PRE-SHIP REVIEW (PSR) SEARCH COIL MAGNETOMETER (SCM) Michael

THEMIS FM 4/FM 5 INSTRUMENT SUITE PRE-SHIP REVIEW (PSR) SEARCH COIL MAGNETOMETER (SCM) Michael Ludlam University of California - Berkeley FM 4/FM 5 PSR SCM - 1 UCB, May 5 th , 2006

Overview • • Personnel and Flight Hardware Status SCM End-Item Data Package • •

Overview • • Personnel and Flight Hardware Status SCM End-Item Data Package • • • SCM Changes since FM 2/FM 3 PSR • • • Folder #21: FM 1 SCM Harness Folder (SN 02) Folder #22: FM 1 SCM Folder (SN 04) None PFRs SCM Backup Slides • Environmental Qualification, Acceptance and Performance Test Summary FM 4/FM 5 PSR SCM - 2 UCB, May 5 th , 2006

SCM Status • Personnel and Hardware Status • Centre d’etudes Environnements Terrestre et Planetaires

SCM Status • Personnel and Hardware Status • Centre d’etudes Environnements Terrestre et Planetaires (CETP) – – – – • Flight Hardware Status – – FM 4/FM 5 PSR Bertrand De la Porte Alain Roux O. Le Contel Abdel Bouabdellah Christophe Coillot Dominique Alison Sebastien Ruocco 6 Flight Units of SCM Sensor (SCM-SC) and SCM Pre-Amp Electronics (SCM-PA) have been delivered to UCB Design verification through IDPU system occurs periodically during Instrument Suite Comprehensive Performance Tests. SCM sensor is in quiet magnetic environment in THEMIS Mu Metal Can for these tests. SCM - 3 UCB, May 5 th , 2006

End-Item Data Package Folder #22: SCM FM 1 Folder (SC-SN 1, PA-SN 1) Table

End-Item Data Package Folder #22: SCM FM 1 Folder (SC-SN 1, PA-SN 1) Table of Contents • Environmental Test Reports • • Acceptance Data Package • • • THEMIS SCM-SC Vibration Test Data THEMIS SCM-PA Vibration Test Data THEMIS SCM-SC Thermal Test Data and Log THM-SCM-TST-13 SCM-SC Vibration Test Report THM-SCM-TST-11 SCM-PA Vibration Test Report THM-SCM-TST-14 SCM-SC Thermal Test Report THM-SCM-TST-12 SCM-PA Thermal Test Report Table of Contents: Shipping Documents, Handling and Operations, Qualification Status, Non-Conformance Reports (NCRs), Historical Record, Test Reports, Physical Measurements (mass properties) Note: SCM-PA was delivered with no NCRs Calibration Reports • • FM 4/FM 5 PSR THM-SCM-TST-15 THEMIS SCM Full Calibration Test Report Provides measurement of Transfer Function, Gain, Phase, Sensitivity and exact orientations of magnetic sensor as obtained at Chambon-la-Floret Calibration Facility SCM - 4 UCB, May 5 th , 2006

End-Item Data Package Folder #21: SCM Harness Folder (SN 02) Table of Contents •

End-Item Data Package Folder #21: SCM Harness Folder (SN 02) Table of Contents • Harness Diagram • • Assembly Report • • Harness continuity test Rework/Repair Reports • • Jackson and Tull Certification Log (continuation sheet, problem records, work order table, tool and equipment usage record, certification of conformance, crimp tool tensile test records) Inspection • • THM_SCM_HRN_001 Rev C None Notes & Pictures FM 4/FM 5 PSR SCM - 5 UCB, May 5 th , 2006

PFRs There are no open PFRs on the SCM for any unit. FM 4/FM

PFRs There are no open PFRs on the SCM for any unit. FM 4/FM 5 PSR SCM - 6 UCB, May 5 th , 2006

BACK-UP: FM 4/FM 5 PSR SCM - 7 UCB, May 5 th , 2006

BACK-UP: FM 4/FM 5 PSR SCM - 7 UCB, May 5 th , 2006

SCM- Pre-Amplifier QUALIFICATION The design of the PA has been qualified with the ETU

SCM- Pre-Amplifier QUALIFICATION The design of the PA has been qualified with the ETU Model (EM) Item Model Test type Q/A level Report reference Result SCMPA EM (ETU) Functional Vibrations Thermal Physical Q Q Covered by Thermal Test THM-SCM-PA-TST-01 THM-SCM-PA-TST-02 THM-SCM-PA-TST-03 Success In addition, the SCM-PA has been tested in Thermal Vacuum, mounted on the IDPU ALL TEST REPORTS ARE INCLUDED IN THE ACCEPTANCE DATA PACKAGE DELIVERED WITH THE EM THM-SCM-ADP-0 a section 06 FM 4/FM 5 PSR SCM - 8 UCB, May 5 th , 2006

SCM- Search Coil QUALIFICATION The design of the SC has been qualified with the

SCM- Search Coil QUALIFICATION The design of the SC has been qualified with the ETU Model (EM) Item Model Test type Q/A level Report reference Result SCMSC EM (ETU) Functional / Calibration Vibrations Thermal Physical Thermal Potting only Q THM-SC-TST-05 THM-SCM-CAL-EM 1. 0 THM-SC-TST-06 THM-SC-TST-07 THM-SC-TST-08 THM-SC-TST-09 Success Q Q Success (*) in this test, only the functional properties of the Sensor were validated in thermal. A few cracks being observed in the external potting, the design of the potting was modified and qualified in the test TST-09 ALL TEST REPORTS ARE INCLUDED IN THE ACCEPTANCE DATA PACKAGE DELIVERED WITH THE EM THM-SCM-ADP-0 b section 06 FM 4/FM 5 PSR SCM - 9 UCB, May 5 th , 2006

ACCEPTANCE TESTS of SCM - Pre-Amplifier The PA, Model F 1, has been tested

ACCEPTANCE TESTS of SCM - Pre-Amplifier The PA, Model F 1, has been tested at Acceptance level Item Model Test type Q/A level Report reference Result SCMPA F 1 -F 6 Functional Vibrations Thermal Physical A A Covered by Thermal Test THM-SCM-PA-TST-11 THM-SCM-PA-TST-12 THM-SCM-PA-TST-03 Success See EM EM measurements, not repeated with FMs In addition, the SCM-PA has been tested in Thermal Vacuum, mounted on the IDPU ALL TEST REPORTS ARE INCLUDED IN THE ACCEPTANCE DATA PACKAGE DELIVERED WITH THE FM UNITS THM-SCM-ADP-1 a FM 4/FM 5 PSR SCM - 10 UCB, May 5 th , 2006

ACCEPTANCE TESTS of SCM- Search Coil The SC, model F 1, has been tested

ACCEPTANCE TESTS of SCM- Search Coil The SC, model F 1, has been tested at Acceptance level Item Model Test type Q/A level SCMSC F 1 -F 6 Functional / Calibration Vibrations Thermal Vac Physical A Report reference Result Success THM-SC-TST- 15 THM-SC-TST-13 THM-SC-TST-14 THM-SC-TST-08 A A Success See EM EM measurements, not repeated with FMs ALL TEST REPORTS ARE INCLUDED IN THE ACCEPTANCE DATA PACKAGE DELIVERED WITH FM UNITS THM-SCM-ADP-1 b FM 4/FM 5 PSR SCM - 11 UCB, May 5 th , 2006

THM TESTS SPECIFICATIONS Item Test level specification PA/SC Vibration Sine Vibration Random Q Q

THM TESTS SPECIFICATIONS Item Test level specification PA/SC Vibration Sine Vibration Random Q Q A A According to SAI-STM-2508 - Qualification According to SAI-STM-2510 – Qualification According to SAI-STM-2508 - Acceptance According to SAI-STM-2510 - Acceptance PA SC Thermal Vacuum Q Q A A 3 cycles; 4 h/step; -45, +60 °C 6 cycles; 4 h/step; -100, +80 °C 3 cycles; 4 h/step; -45, +55 °C 2 cycles; 4 h/step; -70, +45 °C Calibration Q/A According to the scientific requirements FM 4/FM 5 PSR SCM - 12 UCB, May 5 th , 2006

THEMIS SCM SCHEDULE Item Model Delivery Date Delivery Status SCM (SC-PA & Harness) ETU

THEMIS SCM SCHEDULE Item Model Delivery Date Delivery Status SCM (SC-PA & Harness) ETU : PA ETU : SC FM 1 FM 2 FM 3 FM 4 FM 5 Spare Model August 04, 2004 November 24, 2005 January 01, 2005 March 22, 2005 April 04, 2005 May 2005 Delivered Delivered FM 4/FM 5 PSR SCM - 13 UCB, May 5 th , 2006

SC Vibration test FM 4/FM 5 PSR SCM - 14 UCB, May 5 th

SC Vibration test FM 4/FM 5 PSR SCM - 14 UCB, May 5 th , 2006

SC Thermal vacuum test FM 4/FM 5 PSR SCM - 15 UCB, May 5

SC Thermal vacuum test FM 4/FM 5 PSR SCM - 15 UCB, May 5 th , 2006

PA Vibration test FM 4/FM 5 PSR SCM - 16 UCB, May 5 th

PA Vibration test FM 4/FM 5 PSR SCM - 16 UCB, May 5 th , 2006

PA Thermal test FM 4/FM 5 PSR SCM - 17 UCB, May 5 th

PA Thermal test FM 4/FM 5 PSR SCM - 17 UCB, May 5 th , 2006