Test Plan 1 Test Plan Displacement Test Date
- Slides: 7
Test Plan 1
Test Plan � Displacement Test � Date Completed: ___________ � Performed By: ________________ 2 Engr. Spec. # Specification (description) Unit of Measure Marginal Value Tolerance 1 The total displacement of the Luminaire must be 1/32" inches 1/32 +/- 2% 1, 2 The adjustment screws must be tightened to the proper torque ft-lbs >=38 - Comments/Status
Test Plan � Vibration Test � Date Completed: ___________ � Performed By: ________________ Engr. Spec. # 3 Specification (description) Unit of Measure Marginal Value Tolerance 2 Vibration of Luminaire must be 2000 rpm 2000 +/- 2% 13 Vibration measurement is sent back to the display binary Yes - 12 Apparatus will sufficiently vibrate a large weight luminaire lb >=150 - 3 Vibrates for 35 hours >=35 - 10 Motor power is sufficient to fully run the test hp >=1 - Who Where When Comments/Statu s
Test Plan � Dimensional Test � Date Completed: ___________ � Performed By: ________________ Engr. Unit of Specification Spec. Measur (description) # e 4 11 Conduits fit the frame 22 Footprint difference compared to old apparatus Marginal Value binary Yes ft^2 <=2 Who Where When Comments/Status
Test Plan � Configuration Test � Date Completed: ___________ � Performed By: ________________ Engr. Unit of Specification Spec. Measur (description) # e Apparatus works while pendant mounted binary Yes Apparatus works while 19 stanchion mounted binary Yes Apparatus 20 works while yoke mounted binary Yes 6 5 Marginal Value Apparatus works while 21 trunnion Who Where When Comments/Status
Test Plan � Ease of Use Test � Date Completed: ___________ � Performed By: ________________ Engr. Specificatio Unit of Spec. n Marginal Value Tolerance Measure # (description) 6 Display shows rpms 13 and running time Closed loop feedback 14, 15 keeps rpms in check Survey given says 11, 1 apparatus is 4, 15 easy to operate Motor is 4 isolated from oil spills Survey given says binary Yes rpm 2000 % >=80 binary Yes +/- 2% Who Where When Comments/Status
Test Plan � Safety Test � Date Completed: ___________ � Performed By: ________________ Engr. Spec. # Specificatio n (description) Unit of Measur e 8 Machine will not run during binary LOTO 17 Pinch points are covered 16 9 7 7 Noise is below 85 decibels Emergency Stop cuts all power to the apparatus Complete Safety # exposed Margina l Value Yes 0 d. B <=85 binary Yes # fail 0 Who Where When Comments/Status
