Termo On Line the Wired Temperature Monitoring System

Termo. On. Line™ the Wired Temperature Monitoring System

Ongoing real time Monitoring, Recording and Reporting for crucial process • Crucial to ensure continuity of operation – Food storage – Warehouses – Chemical processes – Long term trials – Food production • Real-time, active solution • Ensure correct functioning of storage condition and manufacturing process • Like having an employee on site 24*7*365

New Green Standards • New HVAC “Heat Ventilation & Air Conditioning standards’ call for reducing power consumption “This Addendum specifies revised requirements for temperature and humidity: • • Reduce energy consumption for lighting, heating, ventilation, and air conditioning; provide more flexibility in maintaining temperature and; harmonize with environmental guidelines developed by ASHRAE; (American Society of Heating, Refrigeration and Air Conditioning Engineers) maintain reliable operation…” Quoted from TIA 942 addendum 2 (draft)

Target Markets • • • Food industry Industrial processes Temperature controlled storage and maturing Laboratories Utilities remote sites – fuel, gas, electrical, etc. Data Centers

Remote Sites • Remote and unmanned locations and are often left unattended and unmonitored • Using Termo. On. Line system you can monitor the remote sites and receive alarms by SMS or email

Monitoring Control Systems / PLC • The Termo. On. Line system can monitor that the measurements of the controllers are accurate • The measurement can be in other locations then the sensors of the controller, – inside the products manufactured or stored – in different locations in the room and be then more accurate

Termo. On. Line™ A complete flexible Wired Temperature Monitoring System

Termo. On. Line – Key Capabilities Monitoring via remote wired sensors Recording the measured data on a PC On demand reports of data and Alarm logs Email and SMS alarms Up to 256 sensors Sensors connected via up to 500 meters long standard phone 2 wires cable • Inputs: NTC-10 KΩ, 4 -20 m. A, Thermocouple-K, Wet bulb / Dry bulb Psychrometer , switch (on/off) • • •

The Termo. On. Line main components • Datalogger 2 • Datalogger 3 • MSIC 8 • SSIC 8 • DTNTC S/W pack for up to 8 DAQTol units S/W pack for up to 32 DAQTol units DAQTol Master 8 x sensors / channels interface unit with DT 232 serial cable and DTPS 12 VDC Power Supply DAQTol Slave 8 x sensors / channels interface unit with DTCH chain cable 10 KΩ NTC sensor

Optional components • To. L-SMS • STCK 1 Pack For SMS alarms including S/W and GSM Modem DAQTol interface unit for one thermocouple K sensor

Termo. On. Line system overview • Up to 256 wired sensors monitoring • Up to 64 channels with Datalogger 2 S/W or up to 256 channels using Datalogger 3 S/W • Star network • Quick onsite installation • Operated via Datalogger 2 or Datalogger 3 S/W pack • Simple and easy to operate

Termo. On. Line deployment Datalogger 2 or Datalogger 3 S/W pack Power Supply 1 2 Master DAQTol Slave DAQTol 8 2 strand phone wire up to 500 m 10 KΩ NTC sensor Slave DAQTol Up to 64 or 256

Thermocouple and 4 -20 m. A sensors Datalogger 2 or Datalogger 3 S/W pack 10 KΩ NTC sensor Power Supply Master DAQTol Slave DAQTol Power Supply 2 strand phone wire up to 500 m 1 2 8 STCK 1 Thermocouple-K sensor 4 -20 m. A sensor

Applications examples • • • Cold and hot fish smoking Sausage maturing rooms Pressure stability in plastic production Green house Incubators Cold room storage Dry rooms Freezers Room environment monitoring

Thank You TMI Barak Ltd POB 7631 Neve Ram, Ramat Gan 52176, Israel Tel: +97236782298 Mobile: +972528372597 Fax: +97235743807 e-mail: Barak@tmi-barak. co. il Web: www. tmi-barak. co. il