Strikes Spares Strikes In theory the actual pins
- Slides: 20
Strikes & Spares
Strikes In theory, the actual pins that a ball should impact during a strike for Right handed bowler 1, 3, 5, 9 Left handed Bowler 1, 2, 5, 8 The Pocket is in between: 1 & 3 Pin for a right handed bowler 1 & 2 Pin for a left handed bowler
Strikes General rule for adjustments to the pocket: Move in the direction of the miss 1. What direction to move if the ball is ‘light’ in the pocket? Ø To the ball side 2. What direction to move if the ball is ‘high’ in the pocket? Ø Opposite of the ball side Ø
Shooting Spares There are three steps in making spares: 1. Determine the Key pin Ø 2. Align your feet Ø Ø 3. The pin closest to the bowler (it may not be standing) Count boards from your strike position 3, 6 or 9 boards Square your body back to your initial target Ø Look at your strike target
Finding the Key Pin. . .
Finding the Key Pin. . .
Finding the Key Pin. . .
Finding the Key Pin. . .
Finding the Key Pin. . .
Align Your Feet. . .
Align your body back to your initial target. . .
Strike Position – The Reference Spot Bowling 4 Determine the approach and target strike position The 2 nd or 3 rd target arrow or 4 This bowler is swinging up the boards in between 4 Standing on 17 4 Targeting 10 (2 nd arrow)
2 & 8 Pin Spares 42 and/or 8 pin leave 4 Move three boards right from strike position 4 Target is the same as for strikes
4 Pin Spares 44 pin leave 4 Move six boards right from strike position 4 Target is the same as for strikes
7 Pin Spares 47 pin leave 4 Move nine boards right from strike position 4 Target is the same as for strikes
3 & 9 Pin Spares 43 and/or 9 pin leave 4 Move three boards left from strike position 4 Target is the same as for strikes
6 Pin Spares 46 pin leave 4 Move six boards left from strike position 4 Target is the same as for strikes
10 Pin Spares 410 pin leave 4 Move nine boards left from strike position 4 Target is the same as for strikes
Shooting Spares There are three key points you as a bowler need to learn regarding spares; 1. 2. 3. Determine the key pin Align your feet Align your body back to the original target
Shooting Spares Depending on the location of the “key pin”, you will move to a position on the approach to go cross-lane in 3 board increments to convert spares.
- Strikes and spares
- Spares management software
- Spares inventory
- Actual yield
- What is sanctifying grace
- Microprocessor and interfacing darshan pdf
- 406 woodruff key dimensions
- Placing pins in teeth
- Self threaded pins
- Threaded pins dentistry
- Classification of jig and fixture
- Sacral fat pad
- When installing hammer driven pins and studs
- A random sample of 12 shearing pins is taken
- Pinhole preparation
- 4 step bowling
- Hooks and pins cattle
- Icsp pins arduino
- Dt/r pin in 8086
- Pin diagram of 8085 microprocessor
- Target sewing machine needles