Standards and Conformity Assessment Bodies India ILAC MST

Standards and Conformity Assessment Bodies - India ILAC MST Ministry of Science and Technology FCAMIN DST MOC ITU DOT Department of Telecommunication DAE Department of Atomic Energy MOHFW MOA NQC National Registration Board for Personnel and Training National Quality Campaign OIML BIS National Institute of Training for Standardization WTO/TBT STQC Standardization, Testing and Quality Certification NRBPT National Accreditation Board for Certification Bodies Bureau of Indian Standards Ministry of Health and Family Welfare Ministry of Agriculture NABCB NABL Weights and Measures TRAI APT Quality Council of India DCA Telecom Regulatory Authorities India Ministry of Communications and Information Technology APLAC Department of Science and Technology Department of Consumer Affairs PAC QCI National Accreditation Board for Testing & Calibration Laboratories Ministry of Consumer Affairs, Food and Public Distribution IAF IEC JTC 1 Inquiry point ISO CCA Controller of Certifying Authorities BARC APMP Bhabha Atomic Research Centre BIPM NCC Codex National Codex Committee NPL National Physical Laboratory Regional Government International Non-Government Inquiry point WTO/SPS

Standards and Conformity Assessment Bodies - India § Department of Science and Technology (DST) – http: //dst. gov. in/ – Promoting new areas of Science & Technology and to play the role of a nodal department for organising, coordinating and promoting S&T activities in the country § Quality Council of India (QCI) – www. qcin. org – Setup as an Autonomous body by the Government of India to establish and operate National Accreditation Structure for conformity assessment bodies. § National Accreditation Board for Testing & Calibration Laboratories (NABL) – www. nabl-india. org – To provides laboratory accreditation services to laboratories that are performing tests / calibrations in accordance with ISO/IEC 17025 § National Accreditation Board for Certification Bodies (NABCB) – www. qcin. org/html/nabcb/index. htm – Undertakes assessment and accreditation of Certification Bodies applying for accreditation as per the Board's criteria in line with international standards and guidelines. § National Registration Board for Personnel and Training (NRBPT) – www. qcin. org/html/nrbpt_policy. htm – Registration of Auditors, Consultants and Training Programs § National Quality Control (NQC) – www. qcin. org/html/nqc. htm – To spread awareness on advantages of compliance to quality standards & continuous improvement.

Standards and Conformity Assessment Bodies - India § Department of Consumer Affairs (DCA) – http: //fcamin. nic. in/cons_ind. htm – Responsible for the formulation of policies for consumer cooperatives, monitoring prices, availability of essential commodities, consumer movement in the country and controlling of statutory bodies like the Bureau of Indian Standards (BIS) and Weights and Measures § Weights and Measures – http: //fcamin. nic. in/wm_ind. htm – The central authority for dealing with wights and measures; is required to handle all matters falling within the purview of the central government § Bureau of Indian Standards (BIS) – www. bis. org. in – National Standardization body and certification body § National Institute of Training for Standardization (NITS) – www. bis. org. in/trg/train. htm – Training Institute established by BIS § Telecom Regulatory Authorities India (TRAI) – www. trai. gov. in – Regulatory body for Telecoms – Establishment of standards for Service Quality § Department of Telecommunications – www. dot. gov. in – Responsible for grant of licenses for Unified Access Service Internet and VSAT service – Responsible for frequency management in the field of radio communication – Enforces wireless regulatory measures by monitoring wireless transmission of all users in the country

Standards and Conformity Assessment Bodies - India § Standardisation, Testing and Quality Certification (STQC) – http: //stqc. nic. in/ – The program has received substantial technical and financial support from the german government under the Indo-German Technical Cooperation project spanning 15 years (1980 -1995) § Controller of Certifying Authorities (CCA) – www. cca. gov. in – IT Act provides for the CCA to license and regulate the working of Certifying Authorities. The Certifying Authorities (CAs) issue digital signature certificates for electronic authentication of users. § National Physical Laboratory (NPL) – www. nplindia. org – Establish, maintain and update the national standards of measurement and calibration facilities for different parameters § Department of Atomic Energy (DAE) – www. dae. gov. in § Bhabha Atomic Research Center (BARC) – www. barc. ernet. in – NMI in the field of nuclear technology

Standards and Conformity Assessment Bodies - India Note: The information contained in this presentation was compiled by the American National Standards Institute (ANSI) in collaboration with its public and private sector members and also with its international partners. The primary purpose of the chart is to attempt to portray, in high-level, block diagram form, the entities of the standards and conformity assessment systems of the particular economy and their primary inter-relationships and relationships to international and regional organizations – all on one slide. While many organizations have many subdivisions, only those subdivisions most directly related to standards and conformity assessment are shown. The chart is one perspective of the systems, with emphasis on identification and representation of the various entities. The chart would look different if the entities were drawn proportional to their relative work volumes in the systems, or if they were drawn proportional to their respective standards and conformity assessment revenues or budgets. Such a representation will have inaccuracies which will require correction. The chart is a work in progress and we welcome comments and suggestions for consistent improvement for purposes of accuracy and education. Please feel free to reference the information contained in this presentation. We just ask that you please attribute ANSI as the source. Thank you, The ANSI International Policy Department Please send comments or suggestions to: info@ansi. org