SR100 FP RS485 Cable Interface Guide AUG 10

SR-100 FP RS-485 Cable Interface Guide AUG 10, 2011 R&D Center UNIONCOMMUNITY Co. , Ltd.

1. AC-2100 & SR-100 FP Connection AC-2100 V 3. 0 4 pin 3 pin 2 pin 1 pin Switch ON position SR-100 FP RS-485 Cable Minimum AWG#24 485 B 485 A+ GND +5 V 4 pin 3 pin 2 pin 1 pin Power Cable AWG#20 Max 15 m 2

1. AC-2100 & SR-100 FP Connection RS-485 Cable Minimum AWG#24 Power Cable AWG#20 Max 15 m 3

1. AC-2100 & SR-100 FP Connection 485 B- RS-485 Cable Minimum AWG#24 485 A+ GND +5 V AC-2100 V 3. 0 485 B- +5 V Power Cable AWG#20 Max 15 m SR-100 FP 4

1 -1. VIRDI-2100 & SR-100 FP Setting - How to set VIRDI-2100(V 3. 0) for using SR-100 FP Upgrade the latest firmware (from 30. 51. 08 -008. 00). Push the buttons of terminal in this order. [F 3] – [6. Device] – [6. External Device ] – [2. Dummy FP] – [Local Anti. PB] ( If you want to set Anti-passback, select no. 1 at [Local Anti. PB]. ) - UNIS Monitoring Screenshot If terminal is connected with SR-100 FP, Anti-passback is activated automatically without UNIS setting. SR-100 FP is considered as Slave Reader. 5

2. VIRDI-4000 & SR-100 FP Connection VIRDI-4000 V 3. 5 (from 12. 53. 07 -000. 01) SR-100 FP Power Cable AWG#20 Max 15 m 1 pin GND 2 pin +5 V 4 pin 3 pin 2 pin 1 pin 485 B- 485 B 485 A+ RS-485 Cable Minimum AWG#24 Switch ON position 6

2. VIRDI-4000 & SR-100 FP Connection Power Cable AWG#20 Max 15 m RS-485 Cable Minimum AWG#24 7

2. VIRDI-4000 & SR-100 FP Connection +5 V GND 485 B 485 A+ Power Cable AWG#20 Max 15 m GND +5 V 485 B 485 A+ RS-485 Cable Minimum AWG#24 VIRDI-4000 SR-100 FP 8

2 -1. VIRDI-4000 & SR-100 FP Setting - How to set VIRDI-4000 for using SR-100 FP Upgrade the latest firmware (from 12. 53. 07 -000. 01). Push the buttons of terminal in this order. [*] – [6. Device] – [Password : 084265] –[Enter] - [7. External Device ] – [2. Dummy FP] – [Local Anti. PB] ( If you want to set Anti-passback, select no. 1 at [Local PB]. ) - UNIS Monitoring Screenshot If terminal is connected with SR-100 FP, Anti-passback is activated automatically without UNIS setting. SR-100 FP is considered as Slave Reader. 9