Spare Parts List not to scale Servo Joints

Spare Parts List (not to scale) Servo Joints Front Wheel-height adjustment blocks Servo orientation poles Spring Adjustments Allen Wrench Servo Gaskets and Mount Assorted Nuts and Gaskets Lug Wrench Rear Wheel Height Adjustment Blocks 4. 8 mm ball M 3 x 16 Shafts 5. 8 mm ball Ball Drawbar Spacers M 3 x 22 M 3 x 8 M 3 nut M 3 x 8 sink Rear Wheel Regulators Front Fender Half-Ball Drawbar Connecting Rod 3. 1 mm gasket M 3 x 15 bolt M 2. 6 x 10 Adjustable Tie Down

Tire Construction Rubber Foam Rim Finished Tire Attach the tire with the lug wrench.

Drivetrain Assembly

Motor Mount

Motor Height Adjustment Rear wheel height adjustment spacers elevate the rear axle.

Rear Shock Assembly

Shock Spacers To mount the Tower System you will need to move the rear shock absorber.

Steering Assembly

Front Strut Assembly

Servo Mounting Power the servo and put it in the center (0 degree) state before tightening screws.

Drawbars Adjust D and E to proper length

Rocker Arm Adjustments Rocker arm pieces allow for wheel angle adjustment

To mount the control board you will need to move the rear shock absorber. Rocker arm pieces allow for wheel angle adjustment Rear wheel height adjustment spacers elevate the rear axle. Tire Construction Rubber Foam Rim Finished Tire Attach the tire with the lug wrench.

Customize by adding different rear wheel spacers