Session 58 802 16 Relay TG Closing Remarks

Session #58 802. 16 Relay TG Closing Remarks IEEE 802. 16 Presentation Submission Template (Rev. 9) Document Number: IEEE 802. 16 j-08/017 Date Submitted: 2008 -11 -13 Source: Mitsuo Nohara Relay TG Chair, KDDI R&D Labs. 3 -10 -10, Iidabashi, Chiyoda-ku, Tokyo 102 -8460 Japan *<http: //standards. ieee. org/faqs/affiliation. FAQ. html> Venue: IEEE 802. 16 Session #58, Dallas, TX, USA Base Contribution: None Purpose: TG Meeting organization. Notice: Voice: E-mail: +81 3 6678 6128 mi-nohara@kddilabs. jp This document does not represent the agreed views of the IEEE 802. 16 Working Group or any of its subgroups. It represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE 802. 16. Patent Policy: The contributor is familiar with the IEEE-SA Patent Policy and Procedures: <http: //standards. ieee. org/guides/bylaws/sect 6 -7. html#6> and <http: //standards. ieee. org/guides/opman/sect 6. html#6. 3>. Further information is located at <http: //standards. ieee. org/board/pat-material. html> and <http: //standards. ieee. org/board/pat >. ２

Session #58 802. 16 Relay TG Closing Remarks 16 th Task Group Meeting on Multi-hop Relay in IEEE 802. 16 Relay TG Chair Mitsuo Nohara Vice Chair Peiying Zhu Technical Editor/Secretary Jung Je Son Technical Editor Mike Hart IEEE 802. 16 Relay TG Meeting 10 -13 Nov. , 2008, Dallas, TX, USA 2

Objectives of this 16 th TG Meeting • To advance the development of the P 802. 16 j Draft Standard (IEEE P 802. 16 j/D 7) – Through the Comment resolutions (IEEE 802. 1608/055) • To obtain EC’s conditional approval for Rev. Com submittal, assuming the Rev 2 completion (or to enter the Sponsor Ballot Recirc. ) 3

Where are we? • Sponsor Ballot on IEEE P 802. 16 j/D 7 (10 Nov. – 13 Nov. , 2008) • • • 57 Comments Resolved • 30 Editorial (incl. 0 as Disapproval Condition) • 26 Technical (incl. 1 as Disapproval Condition) • 1 N/A (incl. 4 Late) 16 Contributions (incl. 2 late) Comment Resolutions captured on 80216 -08/055 r 2 Binding Comments (1 in total) • Agree: 1 T, 1 in total Non-Binding Comments (56 in total) • • • Agree: Principle: Disagree: Supercede: Withdraw: Total: 12 T, 22 E, 34 in total 5 T, 4 E, 9 in total 5 T, 2 E, 7 in total 3 T, 2 E, 5 in total 1 N/A, 1 in total 57 T: Technical, E: Editorial

Where are we? (Cont. ) • Sponsor Ballot on IEEE P 802. 16 j/D 7 (10 Nov. – 13 Nov. , 2008) There we had: • 5 Disapprove Voters, • 26 Binding Comments (25 from 08 -048 DB, 1 from 08 -055) Now there we have: • 3 Disapprove Voters, (2 flipped, cleared out 17 comments) • 3 Binding Comments (all from 08 -048 DB, rev 2 -alignment related) • 377/08 -048 r 3 • 326/08 -048 r 3 • 373/08 -048 r 3

• 3 Binding Comments (all from 08 -048 DB, rev 2 -alignment related) • 377/08 -048 r 3 Inconsistent editorial application throughout much of the document. Portions of the document are written to editorial modify IEEE 802. 16 e-2005. Portions are written to modify iterations of the Rev 2 draft. All without properdistinguishing notation. Cannot tell which document 16 j is attempting to amend. In any case, 16 j will have to be aligned to amend the standard that is due to be approved based on the Rev 2 draft. Modify the editorial instructions to consistently amend the final, pre-publication, and eventually final publication revision of the Rev 2 document. Verify that there are no technical conflicts. Actually, I believe there already are conflicts in the UIUC Extended-2 code space use. Fix technical conflicts that arise. (note: This part resolved through Com #376 resolution. ) • 326/08 -048 r 3 This document is not ready for submittal to Rev. Com because, according to the IEEE-SA Standards Board Operations Manual, Subclause 8. 1. 2: Up to three amendments can be approved before the standard shall be revised, unless the base standard has been approved or reaffirmed within the past three years. In the latter case, multiple amendments may be added until the base standard is three years old or three years have elapsed since the most recent reaffirmation of the standard. After the three-year period, Rev. Com shall defer consideration of additional amendments or corrigenda until a revision or a two-year extension request is approved by the IEEE-SA Standards Board. The base standard (IEEE Std 802. 16 -2004) is more than three years old, and it has been subject to three amendments (802. 16 e, 802. 16 f, and 802. 16 g). Therefore, this amendment cannot be approved until the current 802. 16 revision project is complete. Defer submission to Rev. Com until the current 802. 16 revision project is complete and the resulting draft is approved. Revise draft to ensure that it is fully aligned, editorially, with the P 802. 16 Rev 2 revision draft. Ensure that draft is consistent with the other ongoing project (namely, P 80216 h) that would amend the same document. • 373/08 -048 r 3 Page 1 line 38 says: "Temporary note: All references in this version of the draft amendment are relative to P 802. 16 Rev 2/D 5 (June 2008). " The IEEE-SA Standards Board Operations Manual states in 1. 2 that an amendment is "A document that contains new material to an existing IEEE standard and may contain technical corrections to that standard. " This amendment appears to have been written to amend an unapproved working draft of a revision. Re-write the amendment to contain new material to an existing IEEE standard.

Motions at the TG Opening 1. To approve the meeting agenda, IEEE 802. 16 j-08/016 1 st: Michiharu Nakamura, 2 nd: Kanchei Loa, at 16: 40 result: passed with no objections 2. To approve Session #57 802. 16 Relay TG Minutes (IEEE 802. 16 j-08/015) 1. 1 st: Michiharu Nakamura, 2 nd: Avner Aloush, at 16: 45 result: passed with no objections 7

Agenda by Calendar 1. Mon PM (16: 00 -18: 00) • Opening, agenda and minutes review • Summary of Sponsor Ballot Recirculation and inputs to meeting • Rev 2 Alignment Ad-hoc Report and Plan in Dallas • Process for expediting resolutions • Start technical comment resolution 2. Tue (08: 00 -11: 00) • Comment resolution 3. Wed (08: 00 -11: 00 and 15: 00 -17: 30) • Comment resolution 4. Thu (11: 30 -13: 00 and 16: 00 -18: 00) • Comment resolution • Closing, Motions to WG Closing Plenary *WG Closing Plenary (19: 00 -22: 00)

Maint 16 rev２ Relay 16 j Sept. ‘ 08 Session Kobe D 7 Rev 2 Alignment Sponsor Ballot Nov. ‘ 08 Session Dallas SB Comment Res. EC Conditional Approval to Rev. Com D 8 Rev 2 Alignment Sponsor Ballot for Confirmation Editorial Alignment Sponsor Ballot SB Comment D 8 Jan. ’ 09 Session La Jolla D 7 Sponsor Ballot SB-C Comment confirmation D 9 Rev 2 Alignment Sponsor Ballot for confirmation 6 Feb. ’ 09, Rev. Com SB-C Confirmation SB-C No Comment confirmation to Rev. Com Relay Standard Development Plan Sponsor Ballot – for Confirmation 9

Motions at Relay TG Closing 1. To authorize the Relay TG Chair to organize the rev 2 alignment study ad-hoc group led by Gamini Senarath to review the rev 2 draft and provide its recommendation set for the relay draft revision to the relay TG chair team. 1. 1 st: Mitsuo Nohara. 2 nd: . at : . Result: 2. To authorize the Technical Editors to revise the draft (P 802. 16 j/D 7) to accommodate the comment resolutions as defined in 802. 16 -08/055 r 2 or latest and the input from the rev 2 alignment ad-hoc. 1. 1 st: Mitsuo Nohara. 2 nd: , at : . Result: 3. To authorize the TG Chair to request the working group approve P 802. 16 j/D 8 as revised draft and to proceed to Sponsor Ballot confirmation recirculation, to close about 20 Dec. , 2008. 1 st : , 2 nd : , at : , Result: 4. To authorize the TG Chair to request the working group approve to request EC its conditional approval for Rev. Com submittal of the P 802. 16 j/D 8 or latest. 1 st: , 2 nd: , at : . Result: 10

Motion to come at 802. 16 WG Closing 1. To approve P 802. 16 j/D 8 (to be issued by the Relay TG Editors) as the revised working group draft and to authorize the WG Chair to proceed to the Sponsor Ballot confirmation recirculation, to close by about 20 Dec. , 2008. 1 st : , 2 nd : , at : , Result: 2. To authorize the WG Chair to request EC’s conditional approval for Rev. Com submittal of the P 802. 16 j/D 8 or latest. 1 st: , 2 nd: , at : . Result: 11

Relay-TG Meeting Calendar This Week 16: 00 -18: 00, Mon. 10 Nov. 08: 00 -11: 00, Tue. 11 Nov. 08: 00 -09: 30/13: 00 -17: 30, Wed. 12 Nov. 11: 30 -13: 00/16: 00 -17: 30, Thu. 13 Nov. *all at: Room Reunion-E Hyatt Regency Dallas, TX, USA Thank you! *Reference: C 802. 16 -005/013