Selective Soldering SystemM Specification MODEL Dimension Equipment parameters

Selective Soldering System-M Specification : MODEL Dimension Equipment parameters （L× W× H) Transport width adjustment Transport Parameters PCB size Conveyor height Solder pot The amount of tin The dross soldering Nitrogen system consumption solder pot numbers MPF 4/46 MPS 4/46 950 x 1776 x 1565 (mm) 1700 x 1776 x 1565 (mm) 50 -460 (mm) 500 x 460 (mm) 900± 20(mm) electromagnetic pump tin solder pot 0. 5 KG/pot/week x 1 1. 5 -2 m³/h/potｘ 1 single pot/dual pots individual control

single pot dual pots (option: )dual pots individual control FLUX SPRAY MODULE Introduction: The spray head which is imported from Germany offers an absolutely precise and well defined flux deposition on even the smallest areas. The flux is targeted to be applied only to the solder joint, whereby the wettable area can be as small as 3 mm. with the effect that ionic contamination is minimized and flux consumption is reduced. Features Of Machine: Saving 90%flux compared to traditional mode.

The wettable area can be as small as 3 mm, minimize the effect of ionic contamination, meanwhile boards cleaning free. Two axis servo motor control, high positioning accuracy. Minimum ionic contamination. Specifications: Flux Module Flux module x axis distance (max. ) 510 mm Flux module y axis distance (max. ) 450 mm Max. nozzle speed 7 m/min Flux content 2 L Flux type Flux effective level Nozzle Spray pressure Spray width Spray speed Positioning accuracy Flux system Flux Spray Module RO, RE and OR and with the effective standard of L 0, L 1, M 0, according to IEC 61190 -1 -1 L 0, L 1, M 0 130 μm, alternative diameter 0. 5~1. 0 bar 2~8 mm (with spray nozzle 130 μm) 20 mm/s 400 mm/s ± 0. 2 mm 2 -axis With Servo Drive Germany Flux Nozzle

PREHEATING MODULE Introduction: The current selective soldering processes, in particular those for lead-free soldering, multi-layer boards or high mass components, call for increased preheat capacities. Short wave IR heater on the bottom and hot air convective preheating on the top, to ensure preheating evenly. Features Of Machine: 1, Segmented & modular layout, preheating more flexibly. 2, Lower short wave IR preheating on the bottom, increasing the efficiency. 3, Hot air convection preheating on the top, preheating more evenly (optional). Specifications: Preheating module Top heater power 4 KW Top heater voltage 220 V Bottom heater powerr 4. 8 KW Bottom heater voltage 220 V CDA pressure 0. 5 -0. 7 MPa PREHEATING MODULE SOLDERING MODULE Advantages Of Using Induction Pump: 1, 3 -axis servo drives, high control precision. Bottom Short Wave IR Preheating

2, Min. nozzle diameter is 3 mm, point or track soldering available according to different through hole components. 3, Max. solder wave height is 5 mm and controllable, soldering climb rate increased largely. 4, Dual-pot optional, highest flexible. 5, Nitrogen protection, only minute amounts of dross. 6, Pot temperature are continuously monitored. 7, Wave height monitoring available. 8, Solder level monitoring available. 9, No mechanical movement and no wearing. Specifications: Soldering module Solder nozzle position Middle Solder content 13 Kg Max. soldering temperature 350 °C Min. internal diameter of solder nozzle 3 mm, External Diameter 4. 5 mm Max. Solder wave height 5 mm Soldering speed X、Y-axis 10 mm/s Positioning speed X、Y-axis 200 mm/s Positioning speed Z-axis 100 mm/s Positioning accuracy ± 0. 15 mm Max. solder distance(x axis) 510 mm Max. solder distance(y axis) 460 mm Max. distance of z-axis 58 mm Max. pot moving speed 5. 8 m/min Control system 3 -axis With Servo Drive SOLDERING MODULE

FOR MORE INFORMATION CONTACT +44 (0) 1752 206394 info@bentec-int. com www. bentec-int. com