SDD QA and DQM report Melinda Siciliano 1

  • Slides: 32
Download presentation
SDD QA and DQM report Melinda Siciliano 1

SDD QA and DQM report Melinda Siciliano 1

Outline ITS QA with the new trigger schema SDD DQM online SDD QA offline

Outline ITS QA with the new trigger schema SDD DQM online SDD QA offline Conclusion 2

ITS QA with the new trigger schema Test for all ITS subdetectors togheter (SPD

ITS QA with the new trigger schema Test for all ITS subdetectors togheter (SPD SDD SSD) and test for ITS subdetector only Problem in the Make. Image method with the “colz” option with ROOT v 5 -28 -00*: • ROOT fix in TPalette. Axis in the ROOT trunk (v 5 -30 -00 patch) Ali. Root: temporary fix added to ITS QA classes (Annalisa and me) already in the Release No histogram to split for trigger for raw data 3

DQM plots (from May DQM meeting) Two plots: normalized occupancy of layers 3 and

DQM plots (from May DQM meeting) Two plots: normalized occupancy of layers 3 and 4 Normalization= Nentries_drift/(Nactivech*Nevts) Excluded Number of modules: 260 from the acquisition 4 2 drift regions per module Max value: 1

DQM Distributions Change: Not Normalized distributions instead of the Normalized: Can help the shifter

DQM Distributions Change: Not Normalized distributions instead of the Normalized: Can help the shifter to find if excluded modules take data or not Normalized: empty bin in any case => The problem is not seen 5

Reference plots for the DQM shifter Added in the QA the plot of the

Reference plots for the DQM shifter Added in the QA the plot of the modules in acquisition. The DQM shifter can check the active modules during the acquisition and check if the plots have 'the same holes' Calibration: Renewed after 20 minutes from Ali. En to the local AMORE CDB Plots for DQM shifter: 4 (2 plots + 2 reference plots) 6

DQM + Reference plots Calibration Plots will be given to the QA shifter in

DQM + Reference plots Calibration Plots will be given to the QA shifter in order to check if the Occupancy plots are corrected or not 7

Instructions to the DQM shifter Posted on the Twiki for the DQM shifter The

Instructions to the DQM shifter Posted on the Twiki for the DQM shifter The expert will be called only in case of ERROR and not in case of ERROR WARNING Copy the log message on the logbook as log entry for the run and then call the shifter Log contains the list with modules or drift regions with errors Helpul to find the module for the oncall expert 8

Example output II-Ali. ITSQAData. Maker. Rec: : End. Of. Detector. Cycle: End of Dedetctor

Example output II-Ali. ITSQAData. Maker. Rec: : End. Of. Detector. Cycle: End of Dedetctor Cycle called for Raws I-Ali. ITSQAChecker: : Init. QAChecker. Limits: Setting of tolerance values I-Ali. ITSQASDDChecker: : Check: Ali. ITSQASDDChecker called with offset: 0 I-Ali. ITSQASDDChecker: : Check: Calib SDD Created I-Ali. ITSQASDDChecker: : Check on RAW I-Ali. ITSQASDDChecker: : Check: Low. Multiplicity_SDDphiz. L 3 : empty ladders 0 filled ladders 14 I-Ali. ITSQASDDChecker: : Check: Low. Multiplicity_SDDphiz. L 4 : empty ladders 0 filled ladders 22 W-Ali. ITSQASDDChecker: : Check: The side 0 of the module 267 (layer 3, ladder 5 det 4 ) is in acquisition, but it didn't take data I-Ali. ITSQASDDChecker: : Check: In total 225 modules and 4 single drift regions took data. I-Ali. ITSQASDDChecker: : Check: In total 31 modules and 4 single drift regions were empty I-Ali. ITSQASDDChecker: : Check: Layer 3 empty modules 9 filled modules 74 I-Ali. ITSQASDDChecker: : Check: Layer 3 empty single drift regions 1 filled single drift regions 1 I-Ali. ITSQASDDChecker: : Check: Layer 4 empty modules 22 filled modules 151 I-Ali. ITSQASDDChecker: : Check: Layer 4 empty single drift regions 3 filled single drift regions 3 W-Ali. ITSQASDDChecker: : Check: 0 good module(s) and 1 good single drift regions didn't take data! Check the calibration 9

Example output W-Ali. ITSQASDDChecker: : Check: Layer 3: 0 good module(s) and 1 good

Example output W-Ali. ITSQASDDChecker: : Check: Layer 3: 0 good module(s) and 1 good single drift regions didn't take data! Check the calibration W-Ali. ITSQASDDChecker: : Check: Layer 4: 0 good module(s) and 0 good single drift regions didn't take data! Check the calibration I-Ali. ITSQAChecker: : Check result for RAW: SPD 0. 000000 SDD 3000. 000000 SSD 0. 000000 Check result 3000. 000000 I-Ali. QAv 1: : Show. Status: ====> QA Status for ITS Low. Multiplicity raw =0 x 4, sim=0 x 0, rec=0 x 0, esd=0 x 0, ana=0 x 0 I-Ali. QAv 1: : Show. ASCIIStatus: Low. Multiplicity ITS RAW 0 x 4, Problem signalled: ERROR 10

SDD DQM status DQM plots (NEWS!) : in the release and at Point 2

SDD DQM status DQM plots (NEWS!) : in the release and at Point 2 Documentation status Updated DQM plot description : DONE Plotlot of the excluded modules as reference Blackboard : Added two messages: – a) messages from cosmic run in TECHNICAL and p-p runs : fixed – b) bad calibration retrieved from the AMORE cdb (Jun 27) =>wrong error messages – Work in progress – Thanks to Barto and Leonardo for the help Memory Consuption OK Logbook : image problem (see blackboard point) 11

From the logbook Run 156622 Layer status from run 156615 12

From the logbook Run 156622 Layer status from run 156615 12

Examples 1 4 2 3 13

Examples 1 4 2 3 13

Module (dr) definition Active: module(dr) in the acquisition Filled: module with data (ideal for

Module (dr) definition Active: module(dr) in the acquisition Filled: module with data (ideal for modules and dr filled=active) (1) Excluded: module out of the acquisition Empty: module(dr) with no data (ideal 14 for modules and drs excluded=empty)

Checks Ali. ITSQASDDChecker: Checks to the modules and single drift regions for Raw Data

Checks Ali. ITSQASDDChecker: Checks to the modules and single drift regions for Raw Data and Rec. Points Check Output reported with printout and in the summary plots 15

Summary plot: Example Events Global Layer 3 Layer 4 Info Status Checks Status 16

Summary plot: Example Events Global Layer 3 Layer 4 Info Status Checks Status 16 Checks

Summary plot: Example 2 Events Global Layer 3 Layer 4 Info Status Checks Status

Summary plot: Example 2 Events Global Layer 3 Layer 4 Info Status Checks Status 17 Checks

QA macros and Trends Trend for raw and recpoints and of the occupancy, events,

QA macros and Trends Trend for raw and recpoints and of the occupancy, events, active and filled modules, radius, charge Check on current runs performed on a chunck for each run All the macros and scripts are available on $ALICE_ROOT/ITS/macros. SDD 18

Example 19

Example 19

Example 20

Example 20

Example 21

Example 21

Summary QA test with the new framework: all OK New DQM restyle: all works

Summary QA test with the new framework: all OK New DQM restyle: all works Problem with the QA lists solved soon the fix in the trunk Offline QA: different checks for raw data and recpoints Introduction of the summary plots: useful for expert checks and for the trend 22

Thanks!!! 23

Thanks!!! 23

SDD QA online Extension of the offline histogram list QA with SDD charge map

SDD QA online Extension of the offline histogram list QA with SDD charge map (drift region) for the raw data Extension of the offline histogram list for the recpoints Installed at Point 2 24

SDD Data Quality Monitoring AMORE DB ALICE DAQ SDD Amore Agent Extension by a

SDD Data Quality Monitoring AMORE DB ALICE DAQ SDD Amore Agent Extension by a flag of the QA histogram list managed by AMORE to add more information about the detector and acquisition status during the data taking SDD GUI Ali. Root QA AMORE CDB Two lists filled: Raw Data Clusters Extra: Calibration Monitoring 25

SDD DQM Distributions Raw Patterns Hit Maps single event Raw Data distributions DDL connections

SDD DQM Distributions Raw Patterns Hit Maps single event Raw Data distributions DDL connections Data Size 26

SDD DQM Distributions DQM histograms Local Coordinates Rec. Points Patterns Rec. Points Distributions Global

SDD DQM Distributions DQM histograms Local Coordinates Rec. Points Patterns Rec. Points Distributions Global Distribution FSE 27

SDD Online DA Monitoring • DA: send histograms to AMORE Data. Base • Three

SDD Online DA Monitoring • DA: send histograms to AMORE Data. Base • Three distributions for each quantity: – Parameter distribution – Difference distribution – Trend distribution 28

Run 154211 29

Run 154211 29

Run 154211 30

Run 154211 30

Run 154211 31

Run 154211 31

Run 154211 32

Run 154211 32