Sculpture and Installation Sculpture methods covered in this

Sculpture and Installation Sculpture methods covered in this chapter include: • Modeling (additive) • Assembling (additive) • Carving (subtractive) • Casting (involves a mold)

Key Terms for this chapter include: • terra cotta • contrapposto • mold • lost-wax process • “in the round” • low relief (basrelief) • high relief. • installation • earthwork • time-based work

Sculpture and Installation Sculpture involves works of art dealing with three-dimensional space. Three-dimensional involves: Height, Width, and Depth “In the round”: Freestanding artwork that can be viewed from any angle; completed on all sides.

Sculpture In relief, forms project from but remain attached to a background surface; meant to be viewed frontally. • Low Relief: Also called bas-relief; figures project only slightly from the background. • High Relief: Forms dramatically project from the background by generally at least half their depth.

MODELING Modeling is an additive process. The sculptor begins with a framework or nothing at all and adds material until the sculpture is finished. It is a very direct method of working. • Clay, also known as terra cotta, is the most common modeling material.

CASTING Casting is a very indirect method of working. It involves a mold of some kind into which liquid or semi liquid is poured and allowed to harden. • Bronze is a common casting material. © 2013, Mc. Graw-Hill Higher Education. All rights reserved.

CASTING The lost-wax process is the most common method for casting. The wax original is destroyed in the process making each sculpture cast unique.

CARVING In carving the sculptor begins with a block of material and cuts, chips, and gouges away until the form emerges. It is a subtractive process. • Wood and stone are the principal materials historically used for this process.

ASSEMBLING In assembling, individual pieces, segments, or objects are brought together to form a sculpture. It is an additive process.

Sculpture: The Human Figure The human figure is a basic subject for sculpture throughout time. • Contrapposto: Meaning counterpoise or counterbalance; sets the body in a gentle Sshaped curve that implies the potential for human motion.

Working with Time and Place Human beings also sculpt the landscape and specific environments. There are practical, religious, and aesthetic reasons for this type of sculpture.

Working with Time and Place • Earthwork: A work of art made for a specific place using natural materials found there, especially the earth itself. • Installation: An artist modifies a space in some way and asks us to enter, explore, and experience it.

Sculpture and Installation: Summary Sculpture Methods Modeling Assembling Carving Casting Key Terms terra cotta mold lost-wax process “in the round” low and high relief contrapposto installation earthwork time-based work