SCHEMATIC MANOEUVRE ILLUSTRATIONS GBRCAA Masters SCHEDULE Takeoff procedure

SCHEMATIC MANOEUVRE ILLUSTRATIONS GBR/CAA Masters SCHEDULE

Take-off procedure wind 1200 zero line

M-11. 02: Reverse Split S and Split S Combo, 2/4 -pt. roll first, full roll second, inverted exit The outside half loops must follow immediately after the 2/4 roll and the full roll The length of the upper horizontal line (incl. rolls) is equal to the diameter of the loops. 2/4 -pt. roll The geometric shape is that of a Double Immelmann.

M-11. 03: Half reverse Cuban 8, two 1/2 rolls in opposite direction The pause between the two half rolls is equal in duration/length to the half rolls. No change in rolling direction = 0 points. 1/2 roll All radii are equal. 1/2 roll

M-11. 03: Half reverse Cuban 8, two 1/2 rolls in opposite direction

M-11. 04: Three horizontal rolls in opposite direction Pause between rolls is very brief. No change in rolling direction after the first or second roll - 0 points!

M-11. 05: Stall turn, 2/4 -pt. roll up, 1/2 roll down 2/4 -pt. roll 2/4 -pt roll on middle of the line

M-11. 05: Stall Turn 2/4 -pt. roll up, 1/2 roll down Pivot on CG 1/2 roll Two wing spans or more – zero points! 1/2 roll on middle of the line All radii are equal.

M-11. 06: Top hat, 4/8 pt. roll over top, inverted exit 4/8 -pt. roll over top. The geometric shape of the top hat is a square. All radii are equal. All lines are of equal length.

M-11. 07: Half outside loop

M-11. 08: Triangle loop with 1/2 rolls in each leg, inverted exit 1/2 roll 90° 1/2 roll Al radii are equal. 1/2 rolls on middle of the lines.

M-11. 09: Figure 9, two 1/2 rolls opposite in downline The pause between the two half rolls is equal in duration/length to the half rolls. 1/2 roll No change in rolling direction - 0 points! 1/2 roll Al radii are equal.

M-11. 10: Stall turn, 3/4 roll up, 1 1/4 snap roll down Rolls on middle of the lines. Two wing spans or more = zero Pivot on CG Snap roll may be positive or negative All radii are equal. 3/4 roll 1 1/4 snap roll ( ) If snap roll = barrel roll or aileron roll: Severe downgrade > 5 pts.

M-11. 11: Pull-push humpty bump, half rolls up and down, exit inverted Half rolls on middle of the lines 1/2 roll

M-11. 11: Pull-push humpty bump, half rolls up and down, exit inverted All radii are equal.

M-11. 12: Reverse four point roll, (2/4 -pt. roll in one direction, 2/4 -pt. roll opposite), inverted exit Hesitations between all roll segments must be equal. All segments are of equal length. 1/4 roll

M-11. 13: Half square loop, full roll up Roll on middle of the line All radii are equal.

M-11. 14: Two outside loops from top with fully integrated roll on top Entry and exit at same height. 90° The loops must be round and must coincide.

M-11. 14: Two outside loops from top with fully integrated roll on top The roll must be fully integrated on the circular flight path of the loops. Roll rate constant. 90°

M-11. 15: Two turn spin, inverted exit Snap entry - zero points! Forced entry: downgrade. Spiral dive - 0 points!

M-11. 16: Cuban eight, with 4/8 pt. roll and full roll in 45 degree downlines All radii are equal. Rolls on middle of the lines. 4/8 -pt. roll Full roll

M-11. 17: Half square loop on corner, half rolls in 45 degree uplines, inverted exit 1/2 rolls on middle of the lines 1/2 roll All radii are equal.

M-11. 18: 45 degrees down with snap roll, 1/2 roll on exit Snap roll on middle of the line. ( ) If snap roll = barrel roll or aileron roll: Severe downgrade > 5 pts. 45° All radii are equal. 1/2 roll

Landing procedure wind 1200 zero line

Forget WHO is flying! Forget WHAT is flying! LOOK ONLY AT LINES DESCRIBED IN THE SKY! Bob Skinner Thank you! Peter Uhlig, January 2008 & Matt Hoyland January 2010