Routing Concept Sirak Kaewjamnong Computer Network Tech and
- Slides: 45
Routing Concept Sirak Kaewjamnong Computer Network Tech and Security
Agenda • Basic concepts • Routing components • Classes of routing protocol • Internet routing protocol 2
What’s Routing - path finding from one end to the other • Routing occurs at layer 3 • Bridging occurs at layer 2 Application layer Presentation layer Session layer Transport layer Network layer Data link layer Physical link Network A Network B 3
IP Routing • IP performs: • search for a matching host address • search for a matching network address • search for a default entry • Routing done by IP router, when it searches the routing table and decide which interface to end a packet out. incoming which interface ? 4
Routing Tables • Routing is carried out in a router by consulting routing table. • No unique format for routing tables, typically table contains: – – – address of a destination IP address of next hop router network interface to be used subnet mask for the this interface distance to the destination 5
Routing Component • Three important routing elements : – algorithm – database – protocol • Algorithm : can be differentiate based on several key characteristics • Database : table in routers or routing table • Protocol: the way information for routing to be gathered and distributed 6
Routing Algorithm Design goals • Optimality - compute the best route • Simplicity/low overhead - efficient with a minimum software and utilization overhead • Robustness/stability- perform correctly in the face of unusual circumstances • Rapid convergence- responds quickly when the network changes • Flexibility- accurate adapt to a variety of network 7
Routing Protocols • Routing protocol : protocol to exchange of information between routers about the current state of the network • Routing protocol jobs – create routing table entries – keep routing table up-to-date – compute the best choice for the next hop router 8
Routing Metrics • How do we decide that one route is better than another? • Solution : using a metric as a measurement to compare routes • Metrics may be distance, throughput, delay, error rate, and cost. • Today, IP supports Delay, Throughput, Reliability and Cost (DTRC) 9
Hop Count • A hop is defined as a passage through one router 2 hops 1 hop R 1 R 2 1 hop R 3 10
Routing Algorithm Types • • Static V. S. Dynamic Source routing V. S. Hop-by-hop Centralize V. S. Distributed Distance vector V. S. Link state 11
Routing Algorithm: Static Route • Manually configuration routing table • Can’t react dynamically to network change such as router’s crash • Work well with small network or simple topology • Unix hosts use command route to add an entry point to point connection route to this way only, no need for update 12
Routing Algorithm: Static Technique Flooding • • Every incoming packet is sent out every outgoing Retransmit on all outgoing at each node Simple technique, require no network information Generate vast numbers of duplicate packet flooding incoming 13
Routing Algorithm: Dynamic Route Dynamic route • Network protocol adjusts automatically for topology or traffic changes • Unix hosts run routing daemon routed or gated 14
Routing Algorithm: Dynamic Route operation • Routing protocol maintains and distributes routing information Routing Protocol Routing Table Routing Protocol Update Routing Information 15
Routing Algorithm: Source Routing • Source routing – Source will determine the entire route – Routers only act as store-forward devices • Hop-by-hop – Routers determine the path based on theirs own calculation 16
Routing Algorithm: Distance Vector • Distance means routing metric • Vector means destination • Flood routing table only to its neighbors • RIP is an example • Also known as Bellmann-Ford algorithm or Ford. Fulkerson algorithm 17
Distance Vector Algorithm • Using hop count as a metric • Each router periodically sends a copy of its routing table to neighbors • send <network X, hopcount Y> R 2 R 1 X W routing table W 0 X 0 Y 1 Z 2 R 3 Y routing table W 1 X 0 Y 0 Z 1 Z routing table W 2 X 1 Y 0 Z 0 18
Distance Vector Routing Update • Step by step from router to router • Slow convergence recompute R 1’s routing table recompute R 2’s routing table recompute R 3’s routing table R 1 R 2 sends out the updated table R 3 topology change R 3 sends out the updated table 19
Distance Vector: Broadcast (I) • The first round I, 1 hop J, 1 hop R 1 J I R 2 I, 1 hop K, 1 hop L, 1 hop J, 1 hop K, 1 hop M, 1 hop N, 1 hop K L R 3 N, 1 hop O, 1 hop N R 5 M O R 4 L, 1 hop M, 1 hop O 1 hop 20
Distance Vector: Broadcast (II) • The second round I, 1 hop J, 1 hop K, 2 hops L, 2 hops M, 2 hops N, 2 hops R 1 J I R 2 I, 1 hop K, 1 hop L, 1 hop J, 2 hops M, 2 hops N, 2 hops O, 2 hops J, 1 hop K, 1 hop M, 1 hop N, 1 hop I, 2 hops L, 2 hops O, 2 hops K L N, 1 hop O, 1 hop J, 2 hops K, 2 hops M, 1 hop L, 2 hops R 3 N R 5 M O R 4 L, 1 hop M, 1 hop O, 1 hop I, 2 hops K, 2 hops J, 2 hops N, 2 hops 21
Distance Vector: Broadcast (III) • The third round I, 1 hop J, 1 hop K, 2 hops L, 2 hops M, 2 hops N, 2 hops O, 3 hops R 1 J I R 2 I, 1 hop K, 1 hop L, 1 hop J, 2 hops M, 2 hops N, 2 hops O, 2 hops J, 1 hop K, 1 hop M, 1 hop N, 1 hop I, 2 hops L, 2 hops O, 2 hops K L R 3 N N, 1 hop O, 1 hop J, 2 hops K, 2 hops M, 1 hop L, 2 hops I, 3 hops R 5 M O R 4 L, 1 hop M, 1 hop O, 1 hop I, 2 hops K, 2 hops J, 2 hops N, 2 hops 22
Distance Vector: Crashed Recovery • R 3 crashed R 1 • New complete route of R 1 R 2 J I K R 3 R 1 routing table net I J K L M N O hop 1 1 2 2 3 via N/A R 2 R 3 R 5 L net I J K L M N O hop 1 1 2 2 3 4 3 via N/A R 2 R 2 R 2 M N R 5 O R 4 23
Count to Infinity • R 2 does not hear any thing from R 3 • R 1 says : don’t worry, I can reach R 3 in 2 hops, R 2 update hop count to 3 • R 1 sees R 2’s update, then update itself to 4 and so on…… R 1 2 2 4 4 I R 2 1 3 3 5 J R 3 initial 1 st round 2 nd round 3 rd round R 3 crashed hop count to R 3 24
Split Horizon • Solve by set distance “ 16” as infinity • No destination can be more than 15 hops away from any other • Distance to X is not reported on the line that packet for X are sent • Actually, it reports with infinity R 1 to R 3 I R 2 J R 3 crashed to R 3 25
Dijkstra’s Shortest Path First Algorithm • Routers send out update messages whenever the state of a link changes. Hence the name: “Link State” algorithm. • Each router calculates lowest cost path to all others, starting from itself. • At each step of the algorithm, router adds the next shortest (i. e. lowest-cost) path to the tree. • Finds spanning tree routed on source router. 26
Open Shortest Path First (OSPF) • RIP limited in large internets • OSPF preferred interior routing protocol for TCP/IP based internets • Link state routing used 27
Routing Algorithm: Link State • Flood routing information to all nodes • Each router finds who is up and flood this information to the entire routers • Use the link state to build a shortest path map to everybody • OSPF is an example • Also known as Shortest Path First (SPF) algorithm 28
Flooding • Packet sent by source router to every neighbor • Incoming packet resent to all outgoing links except source link • Duplicate packets already transmitted are discarded – Prevent incessant retransmission • All possible routes tried so packet will get through if route exists – Highly robust • At least one packet follows minimum delay route – Reach all routers quickly • All nodes connected to source are visited – All routers get information to build routing table • High traffic load 29
Link State Overview • Using cost as a metric • Exchange its connection and cost to its neighbors • Each router compute the set of optimum path to all destination (Shortest Path First) X W link state W 0 X 0 Z Y link state X 0 Y 0 link state Y 0 Z 0 30
Link State Concept • Each router initially begins with directly connected network • Determine full knowledge of distant routers and theirs connection R 1 R 2 build topological exchange link state packets R 4 database R 3 Routing Table compute SPF update routing table 31
Link State Routing Update • Send information to other routers • Fast convergence R 1 R 4 topology change R 2 R 3 32
OSPF Overview • Router maintains descriptions of state of local links • Transmits updated state information to all routers it knows about • Router receiving update must acknowledge – Lots of traffic generated • Each router maintains database – Directed graph 33
Link Costs • Cost of each hop in each direction is called routing metric • OSPF provides flexible metric scheme based on type of service (TOS) – Normal (TOS) 0 – Minimize monetary cost (TOS 2) – Maximize reliability (TOS 4) – Maximize throughput (TOS 8) – Minimize delay (TOS 16) 34
Areas • Make large internets more manageable • Configure as backbone and multiple areas • Area – Collection of contiguous networks and hosts plus routers connected to any included network • Backbone – contiguous collection of networks not contained in any area, their attached routers and routers belonging to multiple areas 35
Operation of Areas • Each are runs a separate copy of the link state algorithm – Topological database and graph of just that area – Link state information broadcast to other routers in area – Reduces traffic – Intra-area routing relies solely on local link state information 36
Comparison Distance Vector Link State pass a copy of whole routing table pass links state update add metric from router to router calculate the shortest path to other routers frequent periodic update: slow convergence event updated: fast convergence 37
Internet Routing Architecture Autonomous System EGP/BGP IGP Autonomous System BGP 4 IGP EGP/BGP 4 EGP/BGP IGP Autonomous System IGP EGP/BGP Autonomous System IGP 38
Routing in the Internet The Internet uses hierarchical routing • The Internet is split into Autonomous Systems (AS’s) • Within an AS, the administrator chooses an Interior Gateway Protocol (IGP) • Examples of IGPs: RIP (rfc 1058), OSPF (rfc 1247). • Between AS’s, the Internet uses an Exterior Gateway Protocol • AS’s today use the Border Gateway Protocol, BGP-4 (rfc 1771) 39
Autonomous System • AS is a collectionof LANs and WANs and the interconnectting routers which under the control of one management authority • The same AS runs the same Interior Gateway Protocol • Why setting up AS? - establish a direct link to each other rather than route through the core Internet • How to select AS? - register and get the AS number from IAB 40
Gateway Protocol • Interior gateway protocol – exchange routing information between routers within a single AS – RIP, RIP II, OSPF • Exterior gateway protocol – collect network-reachablity information for the AS – EGP, BGP 41
Interior Routing Protocols • RIP • Uses distributed Bellman-Ford algorithm. • Updates sent every 30 seconds. • No authentication. • Originally in BSD UNIX. • OSPF • Link-state updates sent (using flooding) as and when required. • Every router runs Dijkstra’s algorithm. • Authenticated updates. • Autonomous system may be partitioned into “areas”. 42
Exterior Routing Protocols Problems: • • Topology: The Internet is a complex mesh of different AS’s with very little structure. Autonomy of AS’s: Each AS defines link costs in different ways, so not possible to find lowest cost paths. Trust: Some AS’s can’t trust others to advertise good routes (e. g. two competing backbone providers), or to protect the privacy of their traffic (e. g. two warring nations). Policies: Different AS’s have different objectives (e. g. route over fewest hops; use one provider rather than another). 43
Border Gateway Protocol (BGP-4) • BGP is not a link-state or distance-vector routing protocol. • BGP advertises complete paths (a list of AS’s). • Example of path advertisement: • “The network 171. 64/16 can be reached via the path {AS 1, AS 5, AS 13}”. • Paths with loops are detected locally and ignored. • Local policies pick the preferred path among options. • When a link/router fails, the path is “withdrawn”. 44
References • http: //www. cisco. com/en/US/products/hw/routers/p s 274/index. html • http: //www. cisco. com/en/US/products/hw/routers/p s 274/products_data_sheet 09186 a 008010 fba 1. html • Computer Networks with Internet Technology By William Stallings Chapter 11 Interior Routing Protocols 45
- Difference between reservoir routing and channel routing
- Static routing and dynamic routing
- Hydrologic continuity equation
- Clock skew
- Low tech assistive technology for communication
- Topology in computer
- Fungsi network layer adalah …
- Network slicing with segment routing
- Computer networks routing algorithms
- Message routing schemes in computer architecture
- Broadcast routing in computer networks
- Louisiana tech computer science
- Diff between virtual circuit and datagram network
- Features of peer to peer network and client server network
- Network centric computing
- Differentiate the real self and ideal self
- Contoh marketing concept
- Computer hardware & network maintenance
- Token ring vs token bus
- Difference between computer network and distributed system
- Nhpce
- Computer and network security
- Ortec routing and dispatch
- Interplay between routing and forwarding
- Address aggregation simplifies the forwarding process in
- Principles of good routing and scheduling
- Difference between dynamic and static routing
- Advantages and disadvantages of distance vector routing
- Masking and data routing mechanism
- Routing fabric
- Hong kong university
- Lab 4-1: routing concepts and protocols
- Broadcast and multicast routing
- Igmpv
- Routing and switching protocols
- Objectives of computer system
- What is computer organization
- Computer, computer basics, input and output devices
- Computer architecture and organization difference
- Ece 526
- Packet switching vs circuit switching شرح
- Concept checking questions for articles
- Error detection and correction in computer networks
- Fddi lan
- Vast network
- Static interconnection network in computer architecture