Public Team Logo TEKNOFEST 2021 ROCKET COMPETITION HighSchool
Public Team Logo TEKNOFEST 2021 ROCKET COMPETITION High-School Category Preliminary Design Report (PDR) Presentation Team Name WARNING: No format other than this Format will be used. The information output should be given in slides (no screenshots) with good resolution and legibility, and care should be taken to prepare a professional presentation. Hand drawings are not permitted. Any numerical data presented should be provided with units. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 1
Public Team Structure Team Logo A chart is to be created presenting the educational status of the team members, their departments, University and institution information, as well as their roles within the team. If there are foreign national competitors, this should be reported separately. This section should not exceed 2– 3 pages. This section will be checked for compliance with requirements numbered 3. 1. 10, 3. 1. 11, 3. 1. 13, 3. 1. 21, 3. 1. 22 and 3. 1. 23 in the specification. Teams may be disqualified for violations of the rules in this section, and in articles 3. 1. 4, 3. 1. 5, 3. 1. 6, 3. 1. 7, 3. 1. 8, 3. 1. 9, 3. 1. 12, 3. 1. 14, 3. 1. 16, 3. 1. 17, 3. 1. 18, 3. 1. 19, 3. 1. 20, 3. 1. 22, 3. 1. 25, 3. 1. 26. 1, 3. 1. 26. 2, 3. 1. 26. 3, 3. 1. 26. 4, 3. 1. 26. 5, 3. 1. 26. 6, 3. 1. 26. 7, 3. 1. 26. 8, 3. 1. 26. 9, 3. 1. 26. 10 and 3. 1. 26. 11. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 2
Public Team Logo Competing Rocket Overview In this section, an overview of the competing rocket will be provided. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 3
Summary of Acceptance Criteria Team Logo Public General Information about the Competing Rocket Dimensions Commentary Height (meters): Diameter (meters): Dry Weight of the Rocket (kg. ): Fuel Mass (kg. ): Dry Weight of the Engine (kg. ): Payload Weight (kg. ): Total Takeoff Weight (kg. ): Propulsion Type: Engine Selection 8 March, 2021 Monday Cesaroni Brand: Cesaroni Name: Total Thrust Value of the Engine (Ns): Name: Class: Total Thrust Value of the Engine (Ns): Predicted Flight Data and Analyses Takeoff Thrust to Weight Ratio: Rail Velocity (m/s): Minimum Static Balance Value During Ignition: Maximum acceleration (g): Maximum Velocity (m/s & M): Determined Altitude (m): Brand: Dimensions Commentary Teams must provide a summary of the information of the entire rocket in this table. The values in the Open Rocket file and the values written here should be consistent. 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 4
Public Open Rocket General Design Team Logo • The Open Rocket Visual will be taken as a "screenshot". The sections of the rocket and each part will be described in the "Open Rocket Visual". • The visual should include the static margin, the length and height of each functional part of the rocket. The CAD designed rocket must be reflected on Open Rocket at a 1: 1 scale. The size of each part should be included as in the sample image Sample Flight Profile Table below. Launch Rail Tip Burn Out 1 st Stage Separation 2 nd Stage Ignition Zenith Parachute Deployment Post Parachute Deployment Time T T+t 1 T+t 2 T+t 3 T+t 4 T+t 5 T + t 6 E L P S T+t 7 - M A Altitude 0 A Y 1 Y 2 Y 3 Y 4 Speed 0 Vr Vbr Va 1 Va 2 Va 3 Vp Vd • A table containing the information in the sample relating to the Flight Profile should be prepared. • This section will be checked for compliance with requirements 3. 2. 4. 1– 3. 2. 4. 9 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 5
Public Team Logo Open Rocket/Rocket Design Overview • As in the sample image below, the CAD Image and Open Rocket image should match exactly, and the dimensions should be specified in this slide. Thus, it must be proven that the rocket designed with CAD and the rocket simulated in the Open Rocket program have the same design. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 6
Public Rocket Design Overview Team Logo • Rocket sections (with their names) and dimensions (diameter, length & mass) will be provided in a general CAD image. • This will be 1 Slide. • (Diameter and length can be given directly on the image or in a table, as in the below example. The size of each rocket subsystem, such as the Nose Cone, Electronic Systems and Recovery Systems, should be provided. ) E L P AM Diameter Rocket Entirety Subsystem 1 Subsystem 2 8 March, 2021 Monday Height Mass S 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 7
Public Engine Selection Team Logo • Information on the engine selected in accordance with articles 3. 2. 1. 6, 3. 2. 1. 9 and 3. 2. 1. 15 of the specification should be provided. • Teams may be disqualified if violations of the rules in this section and in the articles 3. 2. 1. 1, 3. 2. 1. 2, 3. 2. 1. 3, 3. 2. 1. 4, 3. 2. 1. 5 and 3. 2. 1. 6 are identified. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 8
Public Team Logo Flight Simulation • As provided in the sample graphs below; time-based graphs containing velocity, instantaneous acceleration and altitude data should be created using "Open Rocket", and added to the slide. • Altitude – Velocity, Stability Margin – Altitude graphs and Flight Simulation (Altitude vs. Mach. – Stability Margin – Time) graphs should be provided in 2 pages. Open Rocket Graph Creation Screen Graphs you can create • This section will be checked for compliance with requirements 3. 2. 1. 16 and 3. 2. 1. 18 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 9
Public Team Logo Operation Concept (CONOPS) - 1 • The flight profile should be provided visually, and what action will be performed operationally at what stage of the flight should be indicated on this visual. (The table requested on page 5 must include a visualized flight profile, and the data must correspond). It should contain all processes, from the moment of the ignition of the rocket to its recovery, in sequence. • Hand drawings are prohibited. Launch process (The stages should be enumerated on the visual, and each stage should be explained with a table. ) Warning: In the same flight profile, the stage and the manner in which the "Payload" leaves the rocket should be specified, as well as the flight profile. E L P Transporting the Rocket to the Rail 1 Burn out (example) 2. . . 6 (Should be provided as 1 Page only) . . . S M A Rocket drogue chute and payload separation (example) Altitude-Time graph of the rocket during its flight 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 10
Public Team Logo Operation Concept (CONOPS) - 2 • The processes that the rocket goes through from the moment of ignition to its recovery should be specified in sequence. • This section should be 1 Slide. It should at least contain the following: • Transportation and loading of the rocket onto the rail, how the relevant electronic equipment will be operated on the rail, and by which team members, • Launch process and Flight stages, • Where and how live data will be stored, • Post-Launch Process and Recovery Process, • Recovery team information and strategies for finding the rocket, • Information on determining the estimated touchdown at 10 m/s wind speed. Suggestion: Task descriptions can be provided in a table. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 11
Public Mass Budget Team Logo • A product tree spreadsheet including all parts of the rocket will be prepared to resemble the example in the slide, and uploaded onto the system as a separate file. • This section will be checked to see if the requirement numbered 4. 1. 9 in the specification has been met. Rocket Product Tree Subsystem Name Component Subsystem 1 (Ex. Nose) Subsystem 2 (Ex. Avionics) Nose Cone Eye Bolt Shock Cord Shoulder Mass (grams) Material Unit E L P M A S Subsystem- (Ex. Engine) _________d Sample Mass Budget 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 12
Public Team Logo Rocket Subsystem Details • This section will be checked to see if the requirements numbered 3. 2. 5. 1, 3. 2. 5. 2, 3. 2. 5. 5, 3. 2. 5. 11 and 3. 2. 5. 12 in the specification have been met. • Teams may be disqualified in the event of violations of the rules in this section and in articles 3. 2. 5. 3 and 3. 2. 5. 4. (See also articles 3. 2. 5. 6, 3. 2. 5. 7, 3. 2. 5. 8, 3. 2. 5. 9 and 3. 2. 5. 10 of the specification. ) 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 13
Public Team Logo SUBSYSTEM DETAILED CONTENTS • The aspects given in the table for each subsystem in the report should be provided with sub-headings, as shown in the table. • For each aspect, the advantages and disadvantages of the options should be listed and the reasons for choosing the option to be used in the design should be explained. • This section will be checked for compliance with requirement numbered 4. 2. 8 in the specification. Aspect Scope CAD Model The CAD outputs of alternative configurations should be shared, if there any, to : show the components that make up the subsystem in detail. If there is no alternative, the CAD output for a single configuration will be included. Physical Specifications The physical specifications of the subsystem should be explained in detail. Parameters : such as length, diameter, mass, special aerodynamic shape or angle etc. must be specified. (Technical drawing may be included. ) Material Information The material alternatives to be used for the parts that make up the sub-system will be : provided. The useful technical properties of the materials will be provided in a comparative table. Production Methods : The production methods will be summarized in a tabular format. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 14
Public Team Logo Nose Cone & Fin Mechanical View 3 D View of Nose Cone (CAD) 8 March, 2021 Monday 3 D View of Fin (CAD) 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 15
Public Nose Cone - Detail Team Logo The Subsystem must contain all the information specified in the Content Details. • This section will be checked for compliance with requirement numbered 4. 2. 8 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 16
Public Fin - Detail Team Logo The Subsystem must contain all the information specified in the Content Details. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 17
Public Team Logo Payload Mechanical View 3 D View of Payload (CAD) • This section will be checked for complaince with requirements numbered 3. 2. 1. 14, 3. 2. 3. 1, 3. 2 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 18
Public Payload - Details Team Logo The Subsystem must contain all the information specified in the Content Details. • (IF AVAILABLE) The function of the payload should be described. • Describe the options of how the payload will be separated from the rocket. The stage and the manner of separation, and the location process afterwards, should be explained. • This part should not exceed 2 slides. • This section will be checked to see if the requirements numbered 3. 2. 1. 14, 3. 2. 3. 1, 3. 2 in the specification have been met. • The data in this section will also be evaluated within the scope of the rules numbered 3. 2. 3. 3, 3. 2. 3. 4, 3. 2. 3. 5, 3. 2. 3. 6. 1, 3. 2. 3. 6. 2, 3. 2. 3. 7, 3. 2. 3. 8, 3. 2. 3. 9, 3. 2. 3. 10, 3. 2. 3. 11, 3. 2. 3. 12, 3. 2. 3. 13, 3. 2. 3. 14 and 3. 2. 3. 15 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 19
Public Team Logo Mechanical Appearance of Frame Parts & Frame Assembly Parts (STRUCTURAL) 3 D View of Frame Parts (CAD) 3 D View of Frame Assembly Parts (CAD) * The parts that can be mechanically accessed from outside should also be provided with details. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 20
Team Logo Public Structural – Frame/Internal Structural Supports (Assembly Elements) The Subsystem must contain all the information specified in the Content Details. • This section will be checked to see if the requirements numbered 3. 2. 5. 1, 3. 2. 5. 2, 3. 2. 5. 5, 3. 2. 5. 11 and 3. 2. 5. 12 have been met. • Teams may be disqualified in the event of violations of the rules in this section and in articles 3. 2. 5. 3 and 3. 2. 5. 4. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 21
Public Team Logo Engine Compartment Mechanical View & Detail 3 D View of Engine Compartment (CAD) The Subsystem must contain all the information specified in the Content Details. • It should be explained and proven with visuals that the engine was installed last on the rocket in the assembly sequence. • The Engine Thrust-Time graph should be shared. • This section should not exceed 2 slides. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 22
Team Logo Second/Alternative Engine Selection Public • The changes to be made to the rocket that are considered necessary for the installation of the second engine option should be summarized. The reasons for these changes should be explained, and it should be demonstrated that the rail exit velocity and static margin criteria will be met following these changes. • Changes that can be made: Changing the placement inside the rocket, adding and removing mass, different fin options, nose length or material change. • This section will be checked to see if the requirement numbered 3. 2. 1. 7 in the specification has been met. 8 March, 2021 Monday 2020 TEKNOFEST ROCKET COMPETITION CRITICAL DESIGN REPORT (CDR) 23
Public Team Logo Recovery System Mechanical View The Recovery System comprises the parachute opening system and the parachutes. 3 D View of Parachute Opening System Part (CAD) • • 3 D View of Parachute Sections (CAD) This section will be checked for compliance with requirements numbered 3. 2. 2. 1, 3. 2. 2. 4, 3. 2. 2. 5, 3. 2. 2. 6, 3. 2. 2. 7, 3. 2. 2. 8, 3. 2. 2. 9, 3. 2. 2. 10, 3. 2. 2. 11, 3. 2. 2. 15, 3. 2. 2. 18, 3. 2. 2. 19, 3. 2. 2. 20, 3. 2. 2. 21, 3. 2. 2. 22, 3. 2. 2. 23 and 3. 2. 2. 24 in the specification. The data in this section will also be checked for compliance with rules 3. 2. 2. 2, 3. 2. 2. 3, 3. 2. 2. 12, 3. 2. 2. 13 and 3. 2. 2. 14 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 24
Team Logo Recovery System - Parachute Opening System Public The Subsystem must contain all the information specified in the Content Details. • The recovery systems planned to be used in the design should be explained comparatively, with reasons for selection given. • The recovery strategy and stages should be specified. (The system that will activate the recovery system should be specified with details. ) • The functions of the Part and its Subsystems in the rocket should be explained. • How the rocket will operate during recovery should be specified step by step. How parachute separation will be achieved should be explained with Exploded CAD images. • • This part should not exceed 4 slides. This section will be checked for compliance with requirements numbered 3. 2. 2. 1, 3. 2. 2. 4, 3. 2. 2. 5, 3. 2. 2. 6, 3. 2. 2. 7, 3. 2. 2. 8, 3. 2. 2. 9, 3. 2. 2. 10, 3. 2. 2. 11, 3. 2. 2. 15, • 3. 2. 2. 18, 3. 2. 2. 19, 3. 2. 2. 20, 3. 2. 2. 21, 3. 2. 2. 22, 3. 2. 2. 23 and 3. 2. 2. 24 in the specification. The data in this section will also be checked for compliance with rules 3. 2. 2. 2, 3. 2. 2. 3, 3. 2. 2. 12, 3. 2. 2. 13 and 3. 2. 2. 14 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 25
Public Team Logo Recovery System - Parachutes • The color and size of the system should be explained in detail. Blue, white and gray colors should not be chosen. Rather, parachutes that are red, burgundy, brown or orange should be preferred. • The rocket's descent velocity calculations and parachute design should be summarized. • The GPS, radio signal transmitter and sensors – if any – on each item to be recovered should be presented separately for each item. • This part should not exceed 3 slides. • • This section will be checked for compliance with requirements numbered 3. 2. 2. 1, 3. 2. 2. 4, 3. 2. 2. 5, 3. 2. 2. 6, 3. 2. 2. 7, 3. 2. 2. 8, 3. 2. 2. 9, 3. 2. 2. 10, 3. 2. 2. 11, 3. 2. 2. 15, 3. 2. 2. 18, 3. 2. 2. 19, 3. 2. 2. 20, 3. 2. 2. 21, 3. 2. 2. 22, 3. 2. 2. 23 and 3. 2. 2. 24 in the specification. The data in this section will also be checked for compliance with rules 3. 2. 2. 2, 3. 2. 2. 3, 3. 2. 2. 12, 3. 2. 2. 13 and 3. 2. 2. 14 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 26
Public Team Logo Avionics Mechanical View The Subsystem must contain all the information specified in the Content Details. 3 D View of Avionics Division (CAD) 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 27
Public Avionics - Detail / 1 Team Logo Algorithm & System Block Diagram: • A "basic" block diagram showing the structure of the avionics system should be prepared. In this block diagram, all connections between the cards and systems should be visible. • The recovery system algorithm must be planned from the PDR. With special attention paid to this, the Control algorithm should be included at a "basic level". The algorithm test methods should be determined, and the options should be explained with reasons for selection. • All requirements should be described for both the avionics and backup avionics in the same way. • How the transition between avionics and backup avionics will occur in the event of failure should be explained at a "basic level". • This part should not exceed 4 slides. • This section will be checked for compliance with requirements numbered 3. 2. 6. 1, 3. 2. 6. 2, 3. 2. 6. 3, 3. 2. 6. 4, 3. 2. 6. 5, 3. 2. 6. 6 3. 2. 6. 7, 3. 2. 6. 8, 3. 2. 6. 9, 3. 2. 6. 10, 3. 2. 6. 11, 3. 2. 6. 12, 3. 2. 6. 13, 3. 2. 6. 15 and 3. 2. 6. 17, 3. 2. 6. 19, 3. 2. 6. 22, 3. 2. 6. 23, 3. 2. 6. 24, 3. 2. 6. 25 and 3. 2. 6. 26 in the specification. • The data in this section will also be evaluated in terms of its compliance with rules 3. 2. 6. 16 and 3. 2. 6. 18 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 28
Public Avionics - Detail / 2 Team Logo Card Design & Circuit Elements: • The card design of the flight computer that contains sensors, controllers/processors and the circuit elements for the storage of flight data, as specified in the block diagrams shown in Avionics Detail/1, should be presented at a basic level. • The reasons why certain sensors and systems are deemed likely to be used should be explained by comparing them with other basic circuit element (Sensor, Controller and/or processors) alternatives. • Details & plans for sensor data filtering should be provided separately at a “basic level”. • Summary information should be provided about the production and testing of the cards, and the things to be done prior to the CDR. • All requirements should be described for both the avionics and backup avionics in the same way. • This part should not exceed 4 slides. • This section will be checked for compliance with requirements numbered 3. 2. 6. 1, 3. 2. 6. 2, 3. 2. 6. 3, 3. 2. 6. 4, 3. 2. 6. 5, 3. 2. 6. 6 3. 2. 6. 7, 3. 2. 6. 8, 3. 2. 6. 9, 3. 2. 6. 10, 3. 2. 6. 11, 3. 2. 6. 12, 3. 2. 6. 13, 3. 2. 6. 15 and 3. 2. 6. 17, 3. 2. 6. 19, 3. 2. 6. 22, 3. 2. 6. 23, 3. 2. 6. 24, 3. 2. 6. 25 and 3. 2. 6. 26 in the specification. • The data in this section will also be evaluated in terms of its compliance with rules 3. 2. 6. 16 and 3. 2. 6. 18 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 29
• • Public Avionics - Detail / 3 Team Logo Communication & Ground Station: • Information should be provided about the modules to be used for communication and the selection criteria. • The band the packet type of the data transmission should be specified. • Information should be provided about the antennas to be used and the ground station software, as well as the selection criteria. • The calculation of the communication interface power requirement and its suitability to the avionics system design should be demonstrated. • A visual showing the communication between the rocket and the ground station should be prepared. • This part should not exceed 2 slides. section will be checked for compliance with requirements numbered 3. 2. 6. 1, 3. 2. 6. 2, 3. 2. 6. 3, 3. 2. 6. 4, 3. 2. 6. 5, 3. 2. 6. 6 3. 2. 6. 7, 3. 2. 6. 8, 3. 2. 6. 9, 3. 2. 6. 10, 3. 2. 6. 11, 3. 2. 6. 12, 3. 2. 6. 13, 3. 2. 6. 15 and 3. 2. 6. 17, 3. 2. 6. 19, 3. 2. 6. 22, 3. 2. 6. 23, 3. 2. 6. 24, 3. 2. 6. 25 and 3. 2. 6. 26 in the specification. The data in this section will also be evaluated in terms of its compliance with rules 3. 2. 6. 16 and 3. 2. 6. 18 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 30
SUBSYSTEM (ADDITIONAL CONTENT) Team Logo Public • If there any additional subsystems other than those listed in the report, this page should be used to provide all the information specified in the "Subsystem Content Details" at a minimum. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 31
Public Team Logo Rocket Integration Strategy • Detailed information should be given about how the systems will be connected to each other, and their strength. • The interconnections between all subsystems, such as the fin-frame connection method and details, etc. , should be explained. • The manner in which the Altimeter. Two device – to be used for altitude measurement – will be installed on the rocket before the flight should be specified. • The stage and manner in which the black powder (if used) is placed in the rocket should be described. • If the system consists of more than one structure, the connection mechanism should be explained with the help of "basic level" CAD visuals. • This part should not exceed 5 slides. • Remember that the rocket engine will be installed last on the system. • In the competition area, subsystems will be examined by the competition committee if deemed necessary. Your 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN 8 March, 2021 Monday systems should be suitable for reassembly in the competition area. REPORT (PDR) 32
Public Team Logo Project Plan 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 33
Public Project Schedule Team Logo • The project schedule should be shared in detail. • The project schedule should include all stages, from the initial team meeting, right up to the competition. • It should include the production schedules, analysis and test schedules of all subsystems. • Suggestion: The use of Business Planning Programs (Microsoft Project, Project Libre etc. ) is recommended. • This section will be checked for compliance with requirement numbered 3. 1. 21 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 34
Public Tests Team Logo • The test schedule and test methods of all subsystems should be explained in detail. The test methods provided for should be specified. This section should be explained in 5 clear slides. • • 1 st slide: Test Schedule (Required) 2 nd slide: Structural / Mechanical strength tests (Required) 3 rd slide: Recovery systems tests (Required) 4 th & 5 th slide: Avionics system tests (Required) • Algorithm Tests. (Required) • Card Functionality Tests. (Required) • Communication Tests. (Required) • Planned tests for any additional mobile mechanism – if any – should be shared. • All tests should be designed with information that addresses the following points; • Where the test can be done, • The method of the test, • The nature of the data obtained from the test, • How this data will be interpreted. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 35
Public Budget Team Logo • All predicted materials and budget information should be shared here. • This section will be checked for compliance with requirement numbered 3. 1. 21 in the specification. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 36
Public Checklist Team Logo • This section should include a checklist to ensure all of the requirements in the specification have been met. The part of the PDR in which these requirements are provided and the method of meeting the requirements (technical drawing, analysis, test, etc. ) should also be specified. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 37
Failure Mode and Effects Analysis Team Logo Public • A Failure Mode and Effects Analysis (FMEA) should be included in this section. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 38
Public Team Logo Requirements Subject to Optimization • The optimized requirements and optimization criteria within article 4. 1. 3 of the specification should be included here. Example: The effect on the mass of the frame material to be selected will directly affect the target altitude. Selection optimization refers to the effects on the main design other than physical properties, such as strength values, being taken into account in the material selection. For example, choosing a material with a strength in the desired range, and affecting the mass in a way that does not reduce the target altitude. In this example, the optimization criteria are strength and mass. The parameter it affects is the target altitude. Example: Requirement Frame Material Selection 8 March, 2021 Monday Design Options Carbon Fiber / Steel Frame Optimization Criterion- Optimization Criterion 1 2 Outcome and Impact on Design Strength (x-x range) Information regarding the altitude simulation results, the strength requirements from the structural analysis, etc. should be filled in. Mass (must be in the xx range The number of optimization criteria can be more than 2. There should be a minimum of two. 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 39
Public Team Logo Requirements Subject to Optimization • The optimized requirements and optimization criteria within article 4. 1. 3 of the specification should be included here. As in the example on the previous page, if the requirements subject to optimization are provided under the relevant subsystem title, the table may be placed there, but it should be referred to here as follows. Requirement Design Options Frame Material Selection Carbon Fiber / Steel Frame Optimization Criterion- Optimization Criterion 1 2 Strength (x-x range) Mass (should be in the x-x range. Outcome and Impact on Design On Page xx of the Presentation • This part should not exceed 4 slides. 8 March, 2021 Monday 2021 TEKNOFEST ROCKET COMPETITION PRELIMINARY DESIGN REPORT (PDR) 40
- Slides: 40