Programmable Logic Controller PLC Training Software Program Exercise
Programmable Logic Controller (PLC) Training Software Program Exercise 1 i-TRi. LOGI and Easy PLC Program Familiarization Utah Advanced Electronics Core 470107 Utah Robotics Core 210117 Common Core High School Algebra Reasoning Common Core High School Interpreting Functions
Programmable Logic Controller (PLC) Training Software Program Exercise 1 i-TRi. LOGI and Easy PLC Program Familiarization Content-Objective: How Ladder Logic Program basic. Language-Objective: Learn how to use-operate Easy. PLC and i-Trilogi software.
Is there an App for that?
Launch i-TRi. LOGI (Education)
i-TRi. LOGI Training Menu
Click on “file”, “open (local drive)” “samples” and choose the “demo. pc 6” file
Click on “Simulate”, and then “Run (all I/O reset)”
Click on “Start” shown in light green area on upper left side to turn simulation on
Check to see if “run” in relay column is illuminated The “output” should cycle from Out 1/8 inward through Out 4/5
When the “output” sequence is done the “Seq 1” light in the “counter” column should light
While running the simulation click on the program main screen and watch the program execution (lines highlight in blue when executed)
Understanding Ladder Logic On the program screen below symbols shown on a line left side are input
Understanding Ladder Logic On the program screen below symbols shown on a line right side are outputs turned on by line input
Click on Easy PLC Icon
Easy PLC Menu
Click “File”, “Open Project” and select “Machines. Simulator. Gantry. Loader. Demo_Ladder. plc”
Click on “Connection”, “Launch Virtual CPU Locally”
Click on “Connection”, “Connect with Virtual CPU”
Click on “Program” “Transfer to PLC”
Click on “Connection” “Set Virtual PLC to Run Mode”
Click on “Machines Simulator” Icon
Click on “Select Machine”
“Demo Installation Gantry Loader” and “Load Machine”
“Click Red Button on Panel”
- Slides: 24