Product Cooler Model Wondercool Super Maxocool Super Problem

  • Slides: 3
Download presentation
Product : Cooler, Model : Wondercool Super, Maxocool Super Problem : Water leakage from

Product : Cooler, Model : Wondercool Super, Maxocool Super Problem : Water leakage from Selector switch “ Auto drain and high Cool Knob” Reason of water Leakage: Water falling directly on drain assy. from wood wool pad (Design constraint). Water falling directly on Drain Assy. Do not replace assy. drain valve, no problem related to this part.

Product : Cooler, Model : Wondercool Super, Maxocool Super Required Material for modification :

Product : Cooler, Model : Wondercool Super, Maxocool Super Required Material for modification : 1. Modified retainer (Plastic collar cut at center) – Prepare at workshop 2. Elphy, Fevi kwik, Loctite - Buy it from market 3. Plastic sheet ( 11(L) cm x 4(W)cm) – Buy it from market 4. Cutter Modification Procedure : Plastic sheet 11 (L)cm x 4(W)cm Modified Pad retainer 1 Fevi kwik 1. Open Back cover & remove Pad retainer of right side (Above drain Assy. ) 2. Use modified side pad retainer or Cut side pad retainer at customer location as shown in fig. 3. Apply adhesive (Fevi kwik ) on side grill as shown in picture 4. Place plastic sheet on the adhesive & press 3 properly for 1 -2 min. 5. Re-assemble the wood wool & retainer 6. Check by putting water on side pad whether water Apply Adhesive here is leaking or not from drain selector knob. 7. If no water leakage , close back cover and Test the set with water. Cutter 2 4 Place plastic sheet

Product : Cooler, Model : Wondercool Super, Maxocool Super Precautions: 1. For leakage issue

Product : Cooler, Model : Wondercool Super, Maxocool Super Precautions: 1. For leakage issue from drain selector switch do not replace assy. drain valve. 2. Cut side pad retainer at customer location 3. Carry fevikwik. Proposed Counter measures/suggestions to factory 1. Check possibility of change of position of drain selector knob position from side cabinet to front cabinet if not then point no 2 to be considered. 2. Do mould modification in pad retainer so. Water that water does not fall on falling directly on Drain Assy. assy. drain valve. 3. Drain plug to be provided with thread or chain so that it always remains fixed with side cabinet of cooler.