Planmeca Pro X Planmeca Pro X New intraoral

Planmeca Pro. X

Planmeca Pro. X • New intraoral X-ray device • Optimal images for all diagnostic needs: variable k. V and m. A • Easy and fast to use: pre-programmed quick settings, practical design • Digital ready with Planmeca Pro. Sensor. Peferct wokflow with Planmeca Romexis • Versatile installation options

Optimal images for all diagnostic needs • Small focal spot 0. 4 mm • small unsharpness • Optional long cone • small unsharpness • Geometric requirements for good images are met

Optimal images for all diagnostic needs 50 k. V Lower anode voltage: higher contrast, more suitable for endodontic, apex and bone structure diagnosis 60 k. V Medium anode voltages: broader grey scale, suitable for caries detection 70 k. V Higher anode voltages: longest grey scale spectrum for periodontal disease diagnosis

Optimal images for all diagnostic needs Variable milliamperes (2 - 7 m. A) enable to use all the advantages of the modern digital imaging systems and new high-speed films.

Reduced radiation Advantages of the constant potential (DC) X-ray generator • Reduced radiation dose by up to 25% when compared to conventional AC generators • Extremely good and uniform image contrast • Absolute reproducibility of images • Improved reliability and prolonged life span of the X-ray tube • The X-ray unit output is not affected by line voltage fluctuations.

Easy and fast to use • Non-symmetric shape • Tube head and cone have a common smooth plane – easy targeting along the smooth surface – close to the patient’s chest in occlusal images

Easy and fast to use Smooth movements Drift-free positioning Robust design No vibrations easy, quick and accurate positioning

Easy and fast to use 66 pre-programmed quick settings • modality selection to choose film, imaging plate or sensor • density setting • adult/child selection • periapicals for different teeth • occlusal • bite-wing / endo • Quick setting allow ALWAYS to have right exposure values for individual cases

Easy and fast to use • hand held control panel • remote exposure station

Digital ready with Planmeca Pro. Sensor • Integrated magnetic connector for digital Planmeca Pro. Sensor intraoral sensors • The Planmeca Pro. Sensor interconnection cable is routed inside the X-ray unit arm, which results in a clear and clean working area with no interfering cables. • The imaging parameters (k. V, m. A, exposure time) are transferred to the imaging software to be recorded with the patient's images.

Mounting alternatives • Standard wall mount • Floor column mount • Single stud mount, coming 2012 • Pass-through mount, coming 2012 • Dental unit mount, coming 2012 • Ceiling mount (also with operating light), coming 2012

The End More information: Erkki Hiltunen Product Manager, X-rays tel: +358 20 7795 456 erkki. hiltunen@planmeca. com Mark Niemi Product Manager, X-rays tel: +358 20 7795 743 mark. niemi@planmeca. com 12/2011