OSHA Standard 29 CFR 1910 147 Lockouttagout Refresher

  • Slides: 24
Download presentation
OSHA Standard 29 CFR 1910. 147 Lockout/tagout Refresher Training

OSHA Standard 29 CFR 1910. 147 Lockout/tagout Refresher Training

Training must : �Be provided for all authorized and affected employees whenever a change

Training must : �Be provided for all authorized and affected employees whenever a change in job assignments or a change in machines, equipment or processes present a new hazard, or when there is a change in the energy control procedures; �Be conducted whenever a periodic inspection reveals, or whenever the employer has reason to believe, that there are deviations from or inadequacies in the employees knowledge or use of the energy control procedures; and �Reestablish employee proficiency and introduce new or revised control methods and procedures, as necessary. 2

Purpose of Training �This training reviews some of the key elements of lockout/tagout that

Purpose of Training �This training reviews some of the key elements of lockout/tagout that are necessary for all employees to understand whether the employee is authorized, affected or works in an area where energy control procedures may be utilized. 3

Types of Employees Lockout/tagout involves three types of employees with different levels of responsibility:

Types of Employees Lockout/tagout involves three types of employees with different levels of responsibility: �Authorized- Employees who lock out or tag out machines to perform servicing or maintenance on the machines. �Affected- Employees who operate or use the equipment or machines which are locked/tagged out when serviced, maintained, or set-up. �Other- Employees whose work operations are or may be in an area where energy control procedures may be utilized (they are neither 4 affected nor authorized employees).

Lockout definition �Lockout is the process of preventing the flow of energy from a

Lockout definition �Lockout is the process of preventing the flow of energy from a power source to a piece of equipment. ◦ Accomplished when an authorized employee installs a lock, block, or chain on the machine’s disconnect switch or other electrical control switch, valve or lever that will keep it in the off position. ◦ Authorized employees are the only employees who can apply/remove lock. 5

Tagout definition �Tagout is the process of placing a tag on the power source.

Tagout definition �Tagout is the process of placing a tag on the power source. ◦ Tag acts as a warning not to restore energy-it is not a physical restraint. ◦ Tag must clearly state “Do Not Operate” ◦ Tag should only be used when the machine won’t accept a lock. ◦ Tag must be applied/removed by an authorized employee. If a tag is used on an energy isolating device that is capable of being locked out, the tag must be attached at the same location that the lock would have been attached. 6

Hazardous Energy Sources �Electrical �Mechanical �Pneumatic (involving gases, especially air) �Hydraulic (involving fluids) �Chemical

Hazardous Energy Sources �Electrical �Mechanical �Pneumatic (involving gases, especially air) �Hydraulic (involving fluids) �Chemical �Thermal �Water under pressure (steam) �Gravity �Potential energy (stored energy) 7

Energy Control Program �Is required by OSHA for controlling hazardous energy. �Energy Control Program

Energy Control Program �Is required by OSHA for controlling hazardous energy. �Energy Control Program consists of: ◦ Energy control procedures ◦ Employee training ◦ Periodic inspections 8

Energy Control Program � An energy control procedure includes the following: ◦ Intended use

Energy Control Program � An energy control procedure includes the following: ◦ Intended use of the procedure; ◦ Specific steps for shutting down, isolating, blocking, and securing machines or equipment to control hazardous energy; ◦ Specific steps for the placement, removal, and transfer of lockout or tagout devices, as well as the responsibility for them; ◦ Specific requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control measures. It is important to understand that each type of machine or equipment needs its own lockout/tagout procedure. 9

Work activities that would be considered servicing or maintaining equipment: �Constructing �Installing �Setting Up

Work activities that would be considered servicing or maintaining equipment: �Constructing �Installing �Setting Up �Adjusting �Inspecting �Modifying �Repairing �Cleaning Equipment 10

Prepare for Shutdown � 6 steps to be done in sequence in preparing for

Prepare for Shutdown � 6 steps to be done in sequence in preparing for shutdown : 1. Prepare for shutdown 2. Shutdown 3. Isolate equipment from energy sources 4. Apply lockout or tagout device 5. Release stored energy, and 6. Verify isolation 11

Prepare for Shutdown Step One: The authorized employee must know: �The type and magnitude

Prepare for Shutdown Step One: The authorized employee must know: �The type and magnitude of its energy �The hazards of energy that must be controlled �The methods or means to control it 12

Shutdown Step Two: �Turn off or shut down the machinery or equipment using the

Shutdown Step Two: �Turn off or shut down the machinery or equipment using the machine’s normal operating controls. �Use orderly shutdown to avoid any additional or increased hazards as a result of equipment stoppage. 13

Isolate Equipment Step Three: �Each energy isolating device- such as a disconnect switch, circuit

Isolate Equipment Step Three: �Each energy isolating device- such as a disconnect switch, circuit breaker, valve, etc- must be placed in the “off ” position. �A lock must be secured to each energy isolating device to hold it in the “safe” or “off” position 14

Apply devices Step four: �Notify affected employees that the lockout/tagout procedure is starting. �Attach

Apply devices Step four: �Notify affected employees that the lockout/tagout procedure is starting. �Attach lockout/tagout devices to each energy isolating device. �Only authorized employees can attach or remove lockout and tagout devices. �Devices must be durable. �OSHA mandates that lockout and tagout devices must identify the person who applied them. 15

Release Stored Energy Step five: �Relieve all potentially hazardous stored or residual energy. ◦

Release Stored Energy Step five: �Relieve all potentially hazardous stored or residual energy. ◦ Relieve pressure in compressed air lines �Verify machine isolation from energy 16

Verify Isolation Step Six: �Verify machine is deenergized �Verify machine is isolated 17

Verify Isolation Step Six: �Verify machine is deenergized �Verify machine is isolated 17

Lockout Devices � Employer must provide each authorized employee with his or her own

Lockout Devices � Employer must provide each authorized employee with his or her own lockout/tagout devices. ◦ The use of someone else’s lockout device is prohibited. � Device must be used � Devices could be: ◦ ◦ ◦ ◦ to control energy only. Locks Tags Chains Wedges Key blocks Adapter pins Self-locking fasteners 18

Lockout Devices must have the following qualities: �Be durable, which means they must be

Lockout Devices must have the following qualities: �Be durable, which means they must be capable of withstanding weather conditions, corrosive environments, etc. for the maximum period of time that exposure is expected. �Be standardized within the facility in color, shape or size. �Be substantial enough to prevent removal without the use of excessive force or unusual techniques, such as the use of bolt cutters or other metal cutting tools. 19

Tags must have the following qualities: �Be durable in construction and printed so that

Tags must have the following qualities: �Be durable in construction and printed so that exposure to weather conditions or corrosive environments will not cause them to deteriorate. �Be standardized within the facility both in print and format. �Be substantial enough in design and attachment to prevent inadvertent or accidental removal. �Be one-piece, all environment tolerant nylon cable tie. �Include warning statements such as Do Not Start, Do Not Open, Do Not Close, Do Not 20 Energize or Do Not Operate.

Group Lockouts �Each authorized employee must affix a personal lockout or tagout device when

Group Lockouts �Each authorized employee must affix a personal lockout or tagout device when he or she begins work. �Each authorized employee must remove the device when he or she stops work on the machine. 21

Shift Changes �Lockout/tagout protection must be continuous. �Lockout/tagout protection must have an orderly transfer

Shift Changes �Lockout/tagout protection must be continuous. �Lockout/tagout protection must have an orderly transfer between employees. ◦ This means that the first employee’s lock remains in place until the next shift’s employee applies his or her lock. 22

Device Removal �Lockout or tagout device must be removed by the authorized employee who

Device Removal �Lockout or tagout device must be removed by the authorized employee who applied it. �Device may be removed under direction of employer if authorized employee is unavailable. �Steps employers must take before removing a lock or tag: ◦ Verify the authorized employee who applied lock is not at the facility. ◦ Take all reasonable efforts to contact the authorized employee. 23

Restoring Energy �The work area must be inspected to ensure that items, such as

Restoring Energy �The work area must be inspected to ensure that items, such as tools are removed from around the equipment and that all parts of the equipment are replaced including guards and safety devices. �All employees have been removed or safely positioned from the area. �Affected employees are notified that the lockout or tagout devices have been removed. ****Affected employees must not attempt to restart or reenergize machines or equipment that are locked/tagged out. **** 24