MODULE 4 VERSION EXCAVATION TRENCHING SHORING H 2
- Slides: 21
MODULE 4 - VERSION EXCAVATION, TRENCHING & SHORING H 2 S, FIRE PREVENTION ELECTRICAL SAFETY, LOTO
The Acronym PASS when operating a fire extinguisher stands for: A. Pull the lever, Aim the nozzle, Squeeze the pin, Sweep the floor B. Pull rank, Ask for volunteers, Shoot the breeze, Scram C. Pull the pin, Aim the nozzle, Squeeze the lever, Sweep the agent D. Pray that you get out, Aim for the door, Scoot out early, Stay out of the way
Which of the following would not be considered a cause of electrical hazards? A. Properly grounded extension cords B. Wet surroundings C. Explosive atmospheres D. Equipment wear
A Hot Work permit must be obtained prior to performing any Hot Work activity. A. True B. False
When inspecting welding cables ensure: A. No splices within 50 feet of holder B. Connect appropriately C. Never wrap around a body part D. All except A E. All of the above
The two types of energy sources that Lockout / Tagout programs address are: A. B. C. D. Kinetic, Potential Kinetic, Absolute Potential, Static None of the above
Which of the following would be an associated hazard with trenching? A. B. C. D. E. Oxygen deficiency Loose rocks or soil Underground utilities Overhead loads All of the Above
When one leg of the fire triangle is removed, what happens to the fire? A. B. C. D. It grows bigger It goes out It will not spread None of the above
On an excavation site – the site workers are those employees authorized to work on the project A. True B. False
A Fire Watch must : A. Discuss the Emergency Action Plan (EAP) B. Have a fire extinguisher available C. Remain at the work site for 30 minutes after the completion of work D. All of the above
During thunderstorms, derrick personnel must evacuate the derrick. A. True B. False
Lockout is the process of isolating and eliminating the flow of energy to equipment. A. True B. False
A Lockout /Tagout Affected Employee is the person who: A. Affixes the lock on the equipment B. Operates the equipment C. Controls the key to the lock D. None of the above
In the event of an H 2 S alert and the monitor alarm sounds, employees are to: A. Wait for the supervisor to confirm before evacuation B. Evacuate quickly, move upwind or cross-wind to high ground C. Evacuate quickly, move down -wind or cross-wind to high ground D. Return to your vehicle and await the “all clear”
Electricity takes multiple paths, flowing through the path of least resistance A. True B. False
The Immediately Dangerous to Life & Health (IDLH) level for H 2 S is: A. B. C. D. 10 ppm 20 ppm 100 ppm 300 ppm
In the event of an emergency, personnel SHALL NOT attempt to enter an unprotected trench to perform rescue A. True B. False
If an overhead power line is on the ground it can be assumed to be dead (deenergized). A. True B. False
Atmospheric testing shall be done: A. B. C. D. Before employees enter Periodically Every minute A and B
Some trenches qualify as a confined space and require compliance with the confined space regulations. A. True B. False
When Lockout / Tagout is involved, we usually think of electricity. What other sources of energy must also be considered? A. B. C. D. Gravitational Pneumatic Hydraulic All of the above
- Trenching and excavation safety meeting
- Shoring
- K damas
- 1926 excavation
- Excavation cmr
- What is benching in excavation
- Fiorelli archaeologist
- Peck
- Petit et grand bassin
- Mechanical excavation tools
- Excavation hazards and controls
- Engage in excavation
- Excavation technology
- Contractor safety management system tata steel
- Bassin gynécoïde
- Hawks excavation
- Deep excavation software
- Lot de sauvetage excavation
- Composition lspcc
- Pelvimetrie externe
- Excavation choroidienne
- Excavation takeoff