Micro Sim pspice Step 1 A part is

Micro. Sim pspice

Step 1. 畫電路圖 • A part is a basic circuit element, such as a resistor or power source. • Each part is associated with a part name and is stored in a library. Connection Reference Value V 1=10 V R 1=1 K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Part

Step 2: 接線 Connections • Connections are made primarily by wire segments and bus strips. Connection Reference Value V 1=10 V R 1=1 K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Part

Step 3: 參考名稱References • References are unique names for parts. Unlike the generic part names (such as VDC and R) • references are different for each instance of the same part. Connection 參考名稱 Reference s Value V 1=10 V R 1=1 K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Part

Step 4: 元件數值Values • Values give the magnitude of each part instance. • A name can be associated with each value. Connection Reference Value V 1=10 V R 1=1 K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Part

Step 5: 模擬(Run simulation) Connection Reference Value V 1=10 V R 1=1 K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Part

模擬結果輸出檔案Output file Each time Pspice performs an analysis it automatically generates an output file. Netlist field. * Schematics Netlist * V_V 1 $N_0001 0 10 V R_R 1 0 $N_0001 1 K Alias Field. * Schematics Aliases *. ALIASES V_V 1 V 1(+=$N_0001 -=0 ) R_R 1 R 1(1=0 2=$N_0001 ). ENDALIASES Small signal bias solution. **** SMALL SIGNAL BIAS SOLUTION TEMPERATURE = 27. 000 DEG C NODE VOLTAGE ($N_0001) 10. 0000 VOLTAGE SOURCE CURRENTS NAME CURRENT V_V 1 -1. 000 E-02 TOTAL POWER DISSIPATION 1. 00 E-01 WATTS