May 2009 doc IEEE 802 15 09 0324

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Project: IEEE P 802. 15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: France Telecom / CEA / Thales final proposal Date Submitted: May 4 th, 2009 Source: Jean Schwoerer (1), Laurent Ouvry (2), Arnaud Tonnerre(3) Companies: (1) France Telecom R&d, 28 chemin du vieux chênes, 38240 Meylan, Cedex, FRANCE (2) CEA-LETI, 17 rue des Martyrs 38054, Grenoble Cedex, FRANCE (3) THALES, 146 boulevard de Valmy, 92704 Colombes, France Voice: (1) +33 4 76 76 44 83, (2) +33 4 38 78 93 88, (3) +33 1 46 13 28 50 E-Mail: (1) jean. schwoerer@orange-ftgroup. com, (2) laurent. ouvry@cea. fr, (3) arnaud. tonnerre@fr. thalesgroup. com, Abstract: Response to IEEE 802. 15. 6 call for proposals Purpose: PHY and MAC proposal based on UWB impulse radio for the IEEE 802. 15. 6 CFP Notice: This document has been prepared to assist the IEEE P 802. 15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributors acknowledge and accept that this contribution becomes the property of IEEE and may be made publicly available by P 802. 15 Slide 1 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 List of Authors • France Telecom – Jean Schwoerer, Benoit Miscopein, Stephane Mebaley-Ekome (1) • CEA-LETI – Laurent Ouvry, Raffaele D’Errico, François Dehmas, Mickael Maman, Benoit Denis, Manuel Pezzin (2) • THALES – Arnaud Tonnerre (3) • University of Surrey, UK – Ehsan Z. Hamadani • INSA-Lyon, FR – Jean-Marie Gorce Slide 2 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Outline • Introduction • PHY proposal – – – Advantages of UWB Band Plan and PLL reference diagram Pulse Repetition Frequency, Preamble, Modulation Variable bit rate & throughput Link Budget, Performances Feasibility examples • MAC elements proposal – Beacon-based mode: Evolution of IEEE 802. 15. 4 MAC – Beacon-disabled mode: Preamble sampling approach – Upper layers responsibility • Conclusions & References Slide 3 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 PHY Proposal Slide 4 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Introduction • Proposal main features: 1. Based on IEEE 802. 15. 4 a-2007 where a very reduced set of mode is selected for the BAN context 2. UWB Impulse-radio based 3. Support for different receiver architectures (coherent/non-coherent) 4. Flexible modulation format 5. Support for multiple rates 6. Support for multiple SOP Slide 5 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Advantages of UWB • Low radiated power • • Low PSD, low interference, low SAR High co-existence with existing 802. x standards Real potential for low power consumption Large bandwidth worldwide • • Spectrum is worldwide available Robust to multipath and fast varying channels • Flexible, scalable (e. g. data rates, users) • Low complexity HW/SW solutions in advanced development (eg 802. 15. 4 a) Slide 6 FRANCE TELECOM /CEA-LETI/THALES

Complexity / Power May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Complexity vs. data rate & coverage Coherent Rake IR-UWB EQ IR-UWB Non coherent IR-UWB Coherent IR-UWB FM-UWB Non coherent IR-UWB LDR MDR HDR Applications Coverage Slide 7 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Band plan (selection from 15. 4 a) Band Group 1 2 2 2 Center Frequency Chip Rate (MHz) 1 3494, 4 499, 2 Optional 2 3993, 6 499, 2 Optional 3 4492, 8 499, 2 Mandatory in low band 5 6489, 6 499, 2 Optional 6 6988, 8 499, 2 Optional 8 7488 499, 2 Optional 9 7987, 2 499, 2 Mandatory in high band 10 8486, 4 499, 2 Optional 12 8985, 6 499, 2 Optional 13 9484, 8 499, 2 Optional 14 9984 499, 2 Optional Channel Number Mandatory/Optional Comparison with 15. 4 a : • Only 500 MHz bandwidth channels • No sub-GHz band Slide 8 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Band plan versus regulation for UWB Slide 9 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 PLL Reference Diagram XTAL Oscillator fcomp f. X Phase Detector LPF fc VCO ÷N ÷M fs = 499. 2 MHz Channel Fc f. X fcomp N M 1 3494. 4 MHz 9. 6 MHz 7 52 2 3993. 6 MHz 9. 6 MHz 8 52 3 4492. 8 MHz 9. 6 MHz 9 52 For channels 5, 6, 8, 9, 10, 12, 13, 14 (high band), the factor N becomes respectively 13, 14, 15, 16, 17, 18, 19, 20 Slide 10 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Pulse Repetition Frequency • Selected value – 15. 6 MHz PRF (64. 10 ns of pulse repetition period PRP) – Use of binary codes, No bursts => mean PRF = peak PRF • Rationale – Typical channel delay spread for indoor applications below 25 ns in 90% of channel realizations => very limited ISI (or IPI) – Integer relationship with base frequency of the bandplan (499. 2 MHz / 32) => no fractional PLL – Maximized Pulse amplitude • => better for transmitter power consumption (between-pulses duty cycling) • => better for pulse detectability in the receiver • => better for threshold crossing receivers • => compatible with low voltage CMOS technologies without I/O « tricks » (around 780 m. Vp-p) – A single value => simplicity – Compatible with bit rate scalability with short spreading factors – No high speed clock / long FIRs filters to generate or correlate with bursts of pulses Slide 11 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Preamble Sp code : binary. Length TBD. Unique. PRP = 64. 10 ns Sp code duration N*PRP • PRF is the same as one of the mean PRF in 15. 4 a • Sp code duration: • – Example with N=31 : Tpsym = 31 * PRP = 1. 9871 us – To be checked if enough for a correct (Pd, Pfa) versus complexity Number of Sp codes in the preamble – Example with Nsp = 16 : Tsync = 16 * Tpsym = 31. 7936 us – This is probably a maximum value – To be checked if enough for a correct (Pd, Pfa) versus overhead Slide 12 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Sd = +1 +1 +1 − 1 Symbol : +1 PRP = 64. 10 ns Symbol duration = 7 pulses ~ 448. 8 ns • • Symbol : -1 Objective: to afford (differential) coherent and non coherent receivers PRF is ~ the same as one of the mean PRF in 15. 4 a Spreading code length Sd – • Modulation Example with N=7 (BARKER CODE) : Symbol duration Ts = 7 * PRP = 0. 4488 us Modulation : 1 bit per symbol + second bit used for redundancy OR non coherent demod – DBPSK : BPSK with differential encoding (at symbol level) • – DBPSK + PPM : the whole S code can be shifted within the PRP with ½ the PRP value • – Sub-optimal but easier to implement and less sensitive to clock drift Does not affect the mean PRF value and the spectrum shape, Is simple to implement (though a little more complex than pure DPBSK), Is compatible with non coherent / threshold crossing detectors, Is ISI compatible in the BAN context DBPSK + chip-PPM : each chip of the code is shifted according to the chip value => selected option Slide 13 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Modulation : Bit-DBPSK + 2 -PPM (an orthogonal keying modulation) Slide 14 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Variable bit rates • Bit rates – Bit rate is adjusted with the number of pulses per symbol keeping a constant mean PRF – 2. 22 Mbit/s is the default uncoded data rate – 5. 2 and 15. 6 Mbit/s are mandatory => No additional complexity & allows to reduce channel use – 31. 2 Mbit/s is proposed optionally for coherent receiver (uses both PPM & DPBSK) – Proposed FEC : systematic RS (63, 55) as in 15. 4 a (maximum efficiency ~0. 87) – The lowest rate is a compromise between “Tx_on time” and range (+clock drift compensation requirements). Bit rates Mean PRF (MHz) Nb. (N) pulses per symbol (barker code length) Symbol duration (ns) 15. 6 7 15. 6 Symbol rate (MHz) Bit rate (Mbps) PSK or PPM Coded Bit rate (Mbps) PSK or PPM 448. 7 2. 229 1. 95 3 192. 3 5. 2 4. 54 15. 6 1 64. 1 15. 6 13. 62 15. 6 1 64. 1 15. 6 31. 2 (PPM & BPSK) 27. 24 (PPM & BPSK) Slide 15 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Link budget Parameter PSD fc (arithmetic center frequency) Bandwidth @ -10 d. B Peak Payload bit rate (Rb) Distance (d) Maximum Tx Power (PT) Pulse shaping losses & Power backoff Tx Power (PT) Tx antenna gain (GT) f’c: (geometric center frequency) Path Loss @ 1 m: L 1 = 20 log 10(4. p. f’c / c) Path loss exponent after 1 meter (Alpha) Path Loss @ d m: L 2 = 10*Alpha*log 10(d) Total Path Loss : L= L 1+L 2 Rx Antenna Gain (GR) Rx Power (PR = PT + GR – L) Average noise power per bit : N = -174 + 10 log 10(Rb) Rx noise figure (NF) Average noise power per bit (PN = N + NF) Minimum required Eb/N 0 (S) Implementation Loss (I) Link Margin (M = PR - PN – S – I) Proposed Min. Rx Sensitivity Level Value -41, 3 4492, 8 680 2, 229 3 -13, 0 4, 5 -17, 5 -3 4479, 9 45, 46 2, 00 9, 54 65, 0 0 -85, 5 -110, 5 6 -104, 5 9 5 5, 0 -90, 5 Slide 16 Unit d. Bm/Mhz MHz Mbps m d. Bm d. Bi MHz d. Bi d. Bm d. Bm Comment According to TRD 1 -2 d. B improvement feasible Shared between Tx and Rx According to TRD / CM 4 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Performances analysis methodology and channel models • Goal: – Get/discuss performances at a link budget / outage probability level with the different channel models at the default 2. 2 Mbps rate before digging into the design level performances • Methodology: – Perform extra measurements at CEA-Leti (for UWB 3 -5 GHz but also for 2. 4 GHz) – Complement the IEEE 802. 15. 6 CM 3 UWB channel model with extra measurements and models and compare channel models with each other – Move towards a scenario based approach • Scenario = [at least] given (Tx, Rx) couple + given generic environment + given generic movement • Justified by the huge dispersion of the BAN radio channel – Calculate outage probabilities given the path loss and shadowing statistics Slide 17 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Performances: channel path loss models • Available CM 3 UWB channel models as in TG 6 document : – A (source NICT) • – B (source IMEC) • – Indoor and anechoic Conclusion – – – • Anechoic C (source Samsung) • • Indoor and anechoic Huge dispersion (tens of d. Bs) between models Distance is not a relevant parameter to get a path loss model Coming back to the scenario based channel characterization is proposed Reference – Roblin C. ; D'Errico R. ; Gorce J. M. ; Laheurte J. M ; Ouvry L. , « Propagation channel models for BANs: an overview » , COST 2100, 16/02/2009 - 18/02/2009, Braunschweig , Germany Slide 18 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Performances: extra channel measurements • 2 -5 GHz, indoor and anechoic, 7 subjects, standing/walking/running, scenarios as depicted below • Log normal path loss model. Shadowing and small scale fading modeled separately. • Reference : D'Errico R. ; Ouvry L. , “Time-variant BAN channel characterization” TD(09)879, COST 2100, 1819/05/2009, Valencia, Spain (Measurement set up details available on request) Slide 19 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Performances: extra channel measurements • On previous page: – Error bar @ 1 std of mean channel gain over subjects – Without the slow shadowing std – 2. 4 GHz and 3 -5 GHz for comparison • On this page – UWB 3 -5 GHz only – Error bar @ 2 stds of mean channel gain and slow shadowing (95% confidence interval) • Conclusions – 2. 5% outage probability @ ~-70 d. B channel loss for the 8 scenarios in indoor conditions – Higher outage in anechoic chamber depending on the scenario (not shown here) Slide 20 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Performances : outage probability • Starting from: – The link budget • PTx + antenna = -20. 5 d. Bm • Sensitivity = -90. 5 d. Bm – Includes 6 d. B NF, 5 d. B I. L. and 9 d. B min required Eb. N 0 • 70 d. B total link margin – The different scenario based path loss models • CM 3 UWB A back to the scenarios • CM 3 UWB C back to the scenarios • CEA-Leti’s measurements • Get the outage probability performance for an Eb. N 0 – Probability that the received power is higher than the receiver sensitivity – from the proposed -90. 5 d. Bm sensibility (2. 2 Mbps) – through to -87. 8 d. Bm (5. 2 Mbps) – and to -82 d. Bm (15. 6 Mbps) Slide 21 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Performances : outage probability 5% of channel realizations threshold Area where target PER is obtained 2. 2 Mbps proposed sensibility 5. 2 Mbps proposed sensibility Slide 22 X legend : sensitivity (d. Bm) FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Performances : outage probability 5% of channel realizations threshold Area where target PER is obtained 2. 2 Mbps proposed sensibility 5. 2 Mbps proposed sensibility Slide 23 X legend : sensitivity (d. Bm) FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Performances : scenario based outage probability • Tentative consolidation of – CM 3 A (NICT) – CM 3 C (Samsung) – CEA-Leti’s measurements for four indoor scenarios : – Hip-left ear – Hip-right wrist – Hip-thigh – Hip-chest – (others available as well, including anechoic chamber cases) • Slide 24 Needs further update to refine comparisons, but aims at opening discussions FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Performance : Eb. N 0 requirements (DBPSK) • Conditions: DBPSK, 20 bytes PSDU, CM 3 A channel • Same results (with better PER floor in highest rate) for 256 bytes Note: Input uncoded BER to reach the target PER : 5 e-5 for PER=10% with 256 bytes PSDU 6 e-5 for PER = 1% with 20 bytes PSDU (15. 4/4 a) Slide 25 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Conclusions on link performances on the different channel • The proposed link budget and system specification makes the UWB proposal feasible for most of the scenarios – – outage of 5% as in TRD 1 e-2 PER for 20 bytes PSDU, or 1 e-1 PER for 256 bytes PSDU Actual Eb. N 0 requirement still to refine (current simulation with realistic receiver on CM 3 gives 13 d. B after RS decoding, within the proposed IL values, but the CM 3 multipath model is questionable) • However, large variations between the different models (CM 3 A is optimistic, CM 3 C is pessimistic, CM 3 B and CEA-Leti’s measurement are median) • Further analysis in the 7. 25 -8. 5 GHz band is necessary Slide 26 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Background design know-how (see references) Transmitter 4. 5 GHz Max amplitude : 700 m. Vpp S 11 : <-15 d. B Min Mean PRF : 3. 9 MHz IIP 3 : -15 d. Bm Modulations : OOK, PPM, BPSK Input BW : 850 MHz Max sensitivity : -78 d. Bm : 0. 7 m. W Power consumption (analogue + digital RF) : 17 m. W Power consumption • Receiver 4. 5 GHz RF part only – Total Power consumption: 34 m. W (Rx: 17 + Tx: 0. 7 + I/O: 16. 3) – Max data rate: 31 Mb/s (@ max PRF) – RF receiver energy efficiency : 1. 1 n. J/b @ 31 Mb/s – RF transmitter energy efficiency : 23 p. J/b @ 31 Mb/s • Slide 27 Overall transceiver – DBPSK Digital BB: 347 kbps - 1 Mbps – Total RX power consumption: • 44 m. W peak in synchronization mode (RF=17 + BB=27) • 25 m. W in demodulation mode (RF=17 + BB=8) FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Conclusions • Proposal based upon UWB impulse radio alt-PHY of 15. 4 a – Advantage • • • Early implementations exist: experienced proposal Selection of the most relevant modes and their adaptation to the BAN context (note: 15. 4 a mandatory mode is NOT the selected option for 15. 6) A standard exists which will speed up the 15. 6 standard drafting steps – Modulation: • • • System tradeoffs - • DBPSK provide robustness for a limited complexity & 2 PPM allow several receiver implementations RS FEC help to improve link budgets and parity bit will improve robustness of the DBPSK receiver Variable bit rates allow to accommodate all applications envisaged in TG 6 Minimizing talk time improve energy consumption, SOP performances, and regulatory compliance Flexible implementation of the receiver – Compatible with a lot of UWB detectors (coherent, differential, energy, threshold crossing) – FEC decoder is optional • Fits with multiple technologies – Compatible with implementation in low voltage CMOS – Very low power integrated solutions already proven (thus to be adapted) • The very low transmit power is a very attractive feature for the UWB PHY adoption Will permit good compromises between cost, performances and energy consumption Slide 28 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 MAC elements proposal Slide 29 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 MAC layer • BANs may be coordinated most of the time – The coordinator can allocate a negotiated bandwidth to Qo. S demanding nodes (data rate, BER, latency) – A beacon based approach is adapted • Some applications imply a lower channel load – A beacon-free mode is more efficient • An IEEE 802. 15. 4 -like MAC layer is a good base for BANs – With a beacon-enabled mode including TDMA and Slotted-ALOHA (for UWB) with relaying – With an enhanced beacon-free mode by using Preamble Sampling Slide 30 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-based MAC mode • BAN requires above all: – Relaying capability: to cope with low-power emission and severe NLOS conditions • – • Would be limited to 2 -hops in the BAN context Reliability: high level of Qo. S for critical / vital traffic flows Proposed architecture – Mesh network centralized on the gateway • • Full mesh topology based on a scheduling tree Guaranteed access for management and data messages (real TDMA) Slide 31 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-based MAC mode • Superframe structure – – Based on 802. 15. 4 Inclusion of a control portion for management messages • – The control portion shall be large enough to allow dynamic changes of topology The CAP is minimized, mostly used for association using slotted ALOHA Control portion Beacon period Request period Data portion Topo mgmt period CAP Slide 32 CFP Inactive FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-based MAC mode • Fine structure – – Superframe is divided equally into slots Use of Minislots in the Control portion • – Provides flexibility: adaptation to different frame durations Guaranteed Time Mini. Slot (GTMS) shall be introduced in CFP Slide 33 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-based MAC mode • Control portion structure – Beacon period • • • – Request period • • – The beacons are relayed along the Scheduling Tree The beacon-frame length shall be minimized Beacon alignment procedure shall be used Request period is a set of GTS dedicated to allocation demands Transmission from the leaves to the coordinator Topology management period • • Hello frames, for advanced link state procedure Scheduling tree based update Slide 34 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-free MAC mode • However, some situations might not require a beacon -enabled MAC protocol (see references. ) – Symmetric or asymmetric network, low communication rate and small packets – Network set-up, coordinator disappearance, etc • In such conditions, the downlink is an issue : nodes must be powered-up to receive data from the coordinator (e. g. polling/by-invitation MAC scheme) • We propose a Preamble Sampling MAC protocol for UWB Slide 35 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-free MAC mode • Preamble Sampling principles: – Nodes periodically listen to the channel. If it is clear, they go back to sleep; conversly, they keep on listening until data – Nodes are not synchronized but share the wake up period (TCI) – A packet is transmitted with a preamble as long as TCI Slide 36 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-free mode • Preamble sampling protocols are known to be the most energy efficient uncoordinated MAC protocols • TCI depends on the traffic load and the TRX consumption (TX/RX/listen modes) • Can be of the order of 100 ms • The preamble is a network specific sequence – Either a typical wake-up signal – Or a preamble with modulated fields (e. g. @, time left to data) Slide 37 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-free MAC mode • To comply with LDC regulation in the lower band (e. g. Europe), the preamble can be relayed by the BAN nodes (up to 5 ms long bursts) Slide 38 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-free MAC mode • Mode 0: only one burst per device is emitted • Mode 1: burst is re-emitted by a device, under the LDC limit, until a neighbour relays • Mode 2: same as mode 1 + former relays, with emission credits left, can relay again Slide 39 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Upper Layers responsibility • Enabling/disabling beacons switching procedure – From beacon-free to beacon-based mode • BAN formation (coordinator election) • New coordinator election if former coordinator leaves • Can be triggered by a user requesting a link with high Qo. S – From beacon-based to beacon-free mode • Fallback mode if the coordinator leaves • If the required BW (rate of GTS requests) is below a given threshold and requested Qo. S is adequate Slide 40 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Conclusions on MAC • Propose a combination of – A Beacon-based true TDMA mode including fast relaying and mesh support – A Beacon-free mode using preamble sampling and extra features adapted to UWB Slide 41 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 References • • • 15 -08 -0644 -09 -0006 -tg 6 -technical-requirements-document. doc M. Pezzin, D. Lachartre, « A Fully Integrated LDR IR-UWB CMOS Transceiver Based on "1. 5 -bit" Direct Sampling » , ICUWB 2007, Singapore, September 2007 D. Lachartre, B. Denis, D. Morche, L. Ouvry, M. Pezzin, B. Piaget, J. Prouvée, P. Vincent, « A 1. 1 n. J/b 802. 15. 4 a-Compliant Fully Integrated UWB Transceiver in 0. 13μm CMOS» , ISSCC 2009, San Francisco, February 2009 European ICT PULSERS II and ICT EUWB projects deliverables French ANR "BANET" project Roblin C. ; D'Errico R. ; Gorce J. M. ; Laheurte J. M ; Ouvry L. , « Propagation channel models for BANs: an overview » , COST 2100, 16 -18/02/2009, Braunschweig , Germany D'Errico R. ; Ouvry L. , “Time-variant BAN channel characterization” TD(09)879, COST 2100, 18 -19/05/2009, Valencia, Spain European ICT SMART-Net project deliverables Timmons, N. F. Scanlon, W. G. "Analysis of the performance of IEEE 802. 15. 4 for medical sensor body area networking", IEEE SECON 2004, Santa Clara, Ca, October 2004 Slide 42 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Questions ? Slide 43 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Back-up slides Slide 44 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-free MAC mode • In this collaborative scheme, the preamble burst can composed of – – Destination adress (compuls. ) Time left to data (compuls. ) Packet length Source adress • Need for a relaying collision resolution policy – Based on the wake-up instant during the burst (priority is given to the node which has detected the burst first) Slide 45 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-free MAC mode • Relationship between wake-up instant in the burst and back-off length can be of any kind (linear, logarithmic, exponential…) Slide 46 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-free MAC mode • Collaborative scheme is very flexible – Nodes can relay once or up to the emission maximum duration (50 ms in Europe) – If the source listens to the relays, it can get the wake-up schedules of its neighboors – The destinator can emit a specific burst to notify the source • Possibility to stop the relay process • Reduction of the latency because the source can anticipate the payload emission Slide 47 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Beacon-free MAC mode • Exemple of latency reduction Slide 48 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Upper layers responsibility • Management of cooperative transmissions – One way relay channel (OWRC) A single source node transmits data to a single destination node with the help of some relay nodes – Two way relay channel (TWRC) Two nodes like to communicate to each other through the help of a relay Slide 49 FRANCE TELECOM /CEA-LETI/THALES

May. 2009 doc. : IEEE 802. 15 -09 -0324 -02 -0006 Upper layers responsibility • Cooperation possibilities – Low data rate transmission • • – Complexity of involved nodes and power consumption are the main issues Low complexity cooperative techniques may be used High data rate transmission • • Increasing data rate and channel availability are more important Decode and forward schemes in OWRC or even network coding with TWRC are more suitable Slide 50 FRANCE TELECOM /CEA-LETI/THALES