Mastertitelformat bearbeiten AUTEFA using a digital twin to

Mastertitelformat bearbeiten AUTEFA, using a digital twin to reduce commissioning times Restricted © Siemens 2019 siemens. com/textile

AUTEFA, using a digital twin to reduce commissioning times Integrated software chain for product and process development i Project Information Virtual commissioning with NX MCD, Simit and PLCSim OEM ! Customer challenges 1. Simulate complexity of the machine with 16 main axes and early detection of collisions + Customer benefits 1. Safe and faster commissioning through digital twin including standards Product/solutions 1. Interaction of NX MCD, SIMIT and PLCSim Friedberg 2. HMI users previously had to be trained on real machines during operation Products Used Previous system 2. Training and presentation options on the virtual model for end users and sales Now 2. Combination of simulation software with real hardware (HMI) NX MCD SIMATIC SIMIT SIMATIC S 7 -PLCSIM Restricted © Siemens 2019 3. Logic errors in the PLC program must be detected early 3. Cost savings, since commissioning times can be significantly reduced 3. SIMIT and PLCSim incl. Safety with Software-in-the. Loop siemens. com/textile

AUTEFA, using a digital twin to reduce commissioning times Integrated software chain for product and process development AUTEFA Solutions Germany Gmb. H is a renowned manufacturer of textile fiber baling presses, solutions for the production of nonwoven textiles, and automation technology, for example for the beverage industry. Project information Autefa Solutions Germany Gmb. H relies consistently on software from Siemens to shorten product and process development. Future textile fiber bale presses are to reach technical readiness via the digital twin before they are actually commissioned – ideally in half the previous time. Thus, the concept for the world's fastest bale press with automatic packing was digitally verified. Customer objectives Simulate complexity of the machine with 16 main axes and early detection of collisions HMI users previously had to be trained on real machines during operation Logic errors in the PLC program must be detected early Siemens` solution Customer value Digital twin based on NX Mechatronic Concept Designer - Simulation with Software-in-the. Loop solution by SIMIT and PLCSim: Kinematics model with NX Mechatronic Concept Designer Behavior model and control simulation with SIMIT and PLCSim incl. Safety Combination of simulation software with real hardware (HMI) Safe and faster commissioning through digital twin including standards Training and presentation options on the virtual model for end users and sales Cost savings, since commissioning times can be significantly reduced Restricted © Siemens 2019 Decision for Siemens Easy to implement and tested interaction of software and hardware. Volume & potential n. a. Competition n. a. Product update n. a. Reference positioning Image Contact person Dennis Ziemer Customer approval Link to the Customer Approval Internal Customer profile siemens. com/textile

AUTEFA, using a digital twin to reduce commissioning times Integrated software chain for product and process development Subject to changes and errors. The information given in this document only contains general descriptions and/or performance features which may not always specifically reflect those described, or which may undergo modification in the course of further development of the products. The requested performance features are binding only when they are expressly agreed upon in the concluded contract. All product designations, product names, etc. may contain trademarks or other rights of Siemens AG, its affiliated companies or third parties. Their unauthorized use may infringe the rights of the respective owner. siemens. com Restricted © Siemens 2019 siemens. com/textile