MAGNELIS ZnMgAl metallic coating October 2012 17092021 AMDS

MAGNELIS® Zn-Mg-Al metallic coating October 2012 17/09/2021 AMDS - Products Range Management 0

Product description │ MAGNELIS® © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information What is Magnelis®? • A metallic Zinc coating with 3, 5% Aluminium, 3% Magnesium that offers ultimate corrosion resistance in aggressive environments (e. g. chloride & highly alkaline) What is unique about Magnelis® ? • Improved cut-edge protection • Reduction of zinc coating mass 9/17/2021 AMDS - Products Range Management 1

The right choice │ MAGNELIS® © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Two products can seem the same…but differences go beyond surface aspect ! The optimum chemical analysis has been selected to provide the best results in terms of corrosion resistance behaviour Key role of Magnesium: 3% of Mg in the composition of the metallic coated steel ensures a stable barrier effect on the whole surface against corrosive factors University Studies have clearly demonstrated that below 3% Mg corrosion resistance mecanisms are not improved versus standard metallic coated products (study at Tsukuba University /Japan- March 2010 for Nisshin Steel) 9/17/2021 AMDS - Products Range Management 2

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information CCT 1 cyclic test performances for different coating compositions* The corrosion resistance is not only defined by the coating thickness. Composition of the coating is also very important. Þ Content in Aluminium and Magnesium is very important factor in the corrosion protection. Þ The higher the content, the better the corrosion protection. By using Magnelis : Þ Corrosion resistance can be increased Þ Coating layer can be reduced AMDS - Products Range Management 9/17/2021 3

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Magnelis® Zinc HDG ZHC 9/17/2021 Corrosion product, Simonkolleite and Al. Mg LDH have a compact structure -> High corrosion inhibition Magnelis® forms corrosion product which are very dense and compact while Zn coating forms Zn. O which has a porous structure Zn. O has a porous structure -> Low corrosion inhibition AMDS - Products Range Management 4

Corrosion Performance │ MAGNELIS® © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Plane Surface (accelerated test) Corrosion performances in salt spray test on flat samples Z after 6 weeks 9/17/2021 ZA after 28 weeks after 34 weeks AZ after 34 weeks. SST Magnelis® Zn. Al. Mg 1440 h Z 275 AMDS - Products Range Management 5

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information An alternative to batch galvanizing process Better than batch galvanized in terms of corrosion resistance Batch galvanized 83µm coating : 1000 h Salt Spray Test 9/17/2021 ZM 250 /20µm coating : 1000 h Salt Spray Test AMDS - Products Range Management 6

Corrosion Performance │ MAGNELIS® © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Product Positioning MAGNELIS® the best product in the metallic range for corrosion resistance in very aggressive environments Corrosion resistance by salt spray test (average): MAGNELIS® >200 h/ m Aluzinc®: 100 h/µm Galfan: 25 h/µm HDG Zn: 8 -10 h/µm View Lab Tests 9/17/2021 AMDS - Products Range Management 7

Corrosion Performance │ MAGNELIS® © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Plane Surface (accelerated test) • Cyclic corrosion test : 24 hours of salt spray test, 4 days in humidity chamber(8 H at 40°c 95%humidity, 16 H at 20° 70%humidity), 2 days at room temperature(20°c, 65% humidity) Z *: after 6 weeks 9/17/2021 ZA after 35 weeks AZ after 35 weeks AMDS - Products Range Management Zn. Al. Mg after 35 weeks 8

Corrosion Performance │ MAGNELIS® © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Deformed area (accelerated test) Corrosion behaviour on deformed area • On T-bend area on Magnelis ZM 120 Outdoor exposure 1 year 336 h Salt spray test 4 months 0, 7 mm Zn. Al. Mg 11µm 2880 h 9/17/2021 AMDS - Products Range Management 9

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information • On cup sample Outdoor exposure 1 year HDG Z 275 Magnelis 9/17/2021 Magnelis Salt spray test 1440 hours HDG Z 275 AMDS - Products Range Management 10

Corrosion Performance │ MAGNELIS® Outdoor exposure (Brest) © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information In C 5 M environment (marine, 2 meters from the sea in Brest) • Magnelis, for corrosion rate, is 3 time better than HDG: – Magnelis thin gauge (less than 1 mm) looses 0, 4µm per year while standard HDG looses 1, 3µm that means 3 time more Magnelis® ZM 310 (25µm) thin gauge according this coating weight loss has an expected life time estimated at 62 years!!! 9/17/2021 AMDS - Products Range Management 11

Corrosion Performance │ MAGNELIS® Edge Protection (outdoor exposure) © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information • Corrosion performances of perforated sheet Maritime site : Brest Base Navale, 45° South – Cut edge resistance on perforated sheet (Perforation: R 10 T 20) : self healing appears after 5 months 9/17/2021 AMDS - Products Range Management 12

Corrosion Performance │ MAGNELIS® Edge Protection (outdoor exposure Brest) © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information • Corrosion performances of perforated sheet maritime site : Brest Base Navale, 45° South Cut edge resistance on perforated sheet (Perforation: R 10 T 20) : 9/17/2021 AMDS - Products Range Management 13

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Evolution of White rust and red rust at the cut edges in the perforated zones in C 5 M site. 9/17/2021 AMDS - Products Range Management 14

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Corrosion Performance │ MAGNELIS® Edge Protection (mechanism) 9/17/2021 AMDS - Products Range Management 15

Corrosion Performance │ MAGNELIS® © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Edge Protection (outdoor exposure Zelzate) Edges behaviour in Zelzate Thickness : 2 mm, after 7 months AZ 150 Z 275 ZM 250 1) Magnelis® edge corrosion protection clearly better compared to Aluzinc and HDG 2) Self healing effect also present in C 3 M – C 4 environment 9/17/2021 AMDS - Products Range Management 16

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Sample identification Steel type Substrate thickness (mm) Coating weight (g/m 2) E-passivation Cr coating weight (mg/m 2) Cutting type Shear cut CRS/S 280 GD 2 310 75 -34 Water-jet cut Laser cut (Oxygen) Laser cut (Nitrogen) Ø The samples have been placed in SST chamber and evaluated regularly. Evaluation scale 9/17/2021 AMDS - Products Range Management 17

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Cross sectional SEM investigation of the cut-edges Shear cut overview 9/17/2021 top Coating smeared along the edge bottom The coating is smeared along the edge. AMDS - Products Range Management 18

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Cross sectional SEM investigation of the cut-edges Water-jet cut overview 9/17/2021 AMDS - Products Range Management top bottom The edge is not smooth especially at the regions closer to the surface. 19

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Cross sectional SEM investigation of the cut-edges Laser-cut (Nitrogen) overview 9/17/2021 top bottom The coating on the surface close to the cut edge has been vaporised during the cutting process (~300µm). AMDS - Products Range Management 20

Cross sectional SEM investigation of the cut-edges Laser-cut (Oxygen) top © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information overview Continuous oxide layer on the edge bottom The coating on the surface close to the cut edge has been vaporised during the cutting process (~120µm). 9/17/2021 AMDS - Products Range Management 21

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Cross sectional SEM investigation of the cut-edges Laser-cut (Oxygen) The detailed images of the Fe-O layer formed on the cut-edge after the cutting process. 9/17/2021 AMDS - Products Range Management 22

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information 2 mm / ZM 310 / Shear cut / after 68 days of SST top left right 9/17/2021 AMDS - Products Range Management 23

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information 2 mm / ZM 310 / Water-jet cut / after 68 days of SST top left right 9/17/2021 AMDS - Products Range Management 24

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information 2 mm / ZM 310 / Laser cut (Oxygen) / after 68 days of SST top left right 9/17/2021 AMDS - Products Range Management 25

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information 2 mm / ZM 310 / Laser cut (Nitrogen) / after 68 days of SST top left right 9/17/2021 AMDS - Products Range Management 26

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information 2 mm / ZM 310 / WR-RR (top side) evolution 9/17/2021 AMDS - Products Range Management 27

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information 2 mm / ZM 310 / WR-RR (right side) evolution 9/17/2021 AMDS - Products Range Management 28

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information 2 mm / ZM 310 / WR-RR (left side) evolution 9/17/2021 AMDS - Products Range Management 29

Intermediate evaluation after 68 days of SST © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information • The cut-edge images and WR and RR evolution of 2 mm thick substrate + ZM 310 were presented after 68 days of SST. • Top side => After 68 days of SST, the top sides of all samples are still covered with WR. – Shear cut => the edge is completely covered with WR immediately after 1 day of SST – WJC => the edge is completely covered with WR after 7 days – Laser cut (O 2) => WR evolved quite quickly, being “ 1” after 2 days and “ 5” after 17 days. – Laser cut (N 2) => the edge is completely covered with WR after 4 days • Left & right side – WR and RR ratings remained almost unchanged until now for all the samples – RR on the left side of the laser cut (N 2) sample is a little bit higher than the rest. • Conclusion after intermediate evaluation – No clear distinction could be made between the cut edge corrosion behaviour of samples with different cutting techniques until now. – The test is still running and more data will be available in the future. 9/17/2021 AMDS - Products Range Management 30

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Ammonia environment │ MAGNELIS® Lab test • Magnelis® has demonstrated excellent behaviour in ammonia: 5% NH 3 in water, 20°C, 24 h immersion, weight loss measurment 9/17/2021 AMDS - Products Range Management 31

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Ammonia environment │ MAGNELIS® Magnelis® in stable Lab result being confirmed by outdoor tests 9/17/2021 AMDS - Products Range Management 32

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Behaviour in concrete │ MAGNELIS® • Behaviour in concrete – Steel materials are profiled as deck floor structure – Whole structure let to dry at least 1 day to harden – When concrete is dry, we demold and look in detail the metallic coating 9/17/2021 AMDS - Products Range Management 33

• Contact with concrete © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Before corrosion After corrosion Corroded AZ: very highly corroded, goes to metal (black grey parts) Before corrosion After corrosion Corroded corroded HDG: grey corroded parts 9/17/2021 AMDS - Products Range Management 34

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information • Contact with concrete 9/17/2021 Before corrosion AMDS - Products Range Management After corrosion corroded Galfan: highly corroded, white rust After corrosion Magnelis: some white rust, some corrosion 35

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Forming Properties │ MAGNELIS® Very good behaviour in profiling No powdering Good adhesion of the coating Thin organic coating not necessary 9/17/2021 AMDS - Products Range Management 36

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Thanks to the Low friction coefficient and low powdering behaviour, Magnelis has an excellent formability behaviour and leads to A reduction of tool pollution 9/17/2021 AMDS - Products Range Management 37

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Welding Properties │ MAGNELIS® • Thanks to higher corrosion resistance, lower coating weight can be used, improving weldability • For spot welding, electrode life time is equivalent to HDG • Easier to weld compared with aluminised • Welded area can be reprotect with aluminium or zinc 9/17/2021 AMDS - Products Range Management 38

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Galvanic Coupling │ MAGNELIS® -Magnelis has a behaviour in galvanic coupling equivalent to zinc, that means it can be used in direct contact with: -Pure zinc -HDG -Post galvanised product. -In contact with Aluminium, the behaviour will be better than a standard HDG: the consumption of Magnelis coating will occur but will be delayed compared with zinc -It is not recommended to use it with cupper and lead. 9/17/2021 AMDS - Products Range Management 39

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Paintability │ MAGNELIS® • Post paintability is possible and many customers have reached good results in term of paint adhesion even directly on epassivated product. • Some of them have suppress phosphatation • Nevertheless it is recommended to make a trial in order to evaluate the adhesion case by case. 9/17/2021 AMDS - Products Range Management 40

Performance comparison │ MAGNELIS® © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Product HDG Zn ZA Aluzinc® Magnelis® In Chloride environment (marine site, swimming pool) Reference + ++ +++ In ammonia environment (stable, farm, green house) Reference + = ++ In SO 2 environment (acid industrial environment) Reference + ++ + Temporary protection (transport, storage) Reference + +++ Edge protection (heavy gauge, perforated sheet) Reference + - +++ Corrosion of deformed part (bent or stamped) Reference + - ++ Bending & roll-forming Reference = - = Drawing Reference + - = Reference - -- = - + = Features Anticorrosion properties Forming properties Assembling properties Spot welding (equivalent thickness) Aspect Reference Visual appearance “=” = Equivalent 9/17/2021 “+” = Better “-” = Worse AMDS - Products Range Management 41

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Dimensional feasibilities │ MAGNELIS® • Production line – Liege – Monthly production campaigns : w 35 – w 42 – w 47 – Current Lead time : week 47 • Dimensional range: – Thickness : 0. 45 mm to 5 mm – Width : up to 1680 mm – Max section : 2640 mm² • Grades: – – – DX 51 D to DX 57 D HX 180 BD to HX 300 BD HX 180 YD to HX 300 YD HX 260 LAD to HX 420 LAD S 220 GD to S 390 GD • Aspect: – in surface aspect A, B & X 9/17/2021 AMDS - Products Range Management 42

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information • Conditioning: Oiled or Cr-free passivated • Magnelis® coating range: Brand 9/17/2021 Coating mass both surfaces (g/sqm) Coating thickness (µm/per side) Magnelis® ZM 90 7 Magnelis® ZM 120 10 Magnelis® ZM 175 14 Magnelis® ZM 195 16 Magnelis® ZM 250 20 Magnelis® ZM 310* 25 AMDS - Products Range Management 43

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Applications │ MAGNELIS® Where to use MAGNELIS®? 9/17/2021 AMDS - Products Range Management 44

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Building & Construction Profiles, Structural material, Cladding, Cable trays, Expanded metal Concrete moulds, … Agricultural & farming Barns, Green house structures, … 9/17/2021 Public works & Civil engineering Decks for parking lots, Sound isolation wall panels, Hail protection walls, … Road & Railway applications Where to use MAGNELIS®? Safety & Protection equipment, Accessories … AMDS - Products Range Management 45

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Applications │ MAGNELIS® Concrete mould applications Green house applications 9/17/2021 Solar applications Animal farm applications AMDS - Products Range Management 46

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Guarantee │ MAGNELIS® 9/17/2021 AMDS - Products Range Management 47

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information 20 years guarantee in C 5 M 9/17/2021 AMDS - Products Range Management 48

© Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information Solar panels 9/17/2021 AMDS - Products Range Management 49

Environmental friendly │ MAGNELIS® © Arcelor. Mittal – All rights reserved for all countries Cannot be disclosed, used, or reproduced without prior written specific authorization of Arcelor. Mittal CONFIDENTIAL – Privileged Information - Arcelor. Mittal proprietary information The application of Magnelis ensures the preservation of natural resources since it uses less zink than pure zink coatings. Magnelis reduces considerably the zinc runoff in soils 9/17/2021 AMDS - Products Range Management 50