Machine Safety Presentations Safety Unit Presentations Tool Safety

Machine Safety Presentations Safety Unit

Presentations • Tool Safety • Machine Safety • Teaching yourselves and peers

Tricks and Tips • Watch the “Power Point Basics video • (embed)

Research • Review the handouts • Diagram and Machine Safety

Diagram • Use the diagram to photograph the machine parts • Use the photos in your presentation • Label the parts appropriately

Presenting • View Mr. H’s presentation • Your presentation should include: 1. 2. 3. 4. Title Machine description Top 10 Safety Rules Top 10 Operational Rules

Paraphrasing • Reword all information • Include references

Table Saw Mr. Heydens

Table Saws • Rip, cross cut, bevel and cut angles • Precise

Top 10 Safety Rules 1. 3”rule 2. Hands off saw 3. Align fence

Top 10 Safety Rules 4. Be aware 5. Use guard 6. Adjust when the machine is off

Top 10 Safety Rules 7. Saw must be off when clearing it 8. Do not over reach 9. Use a stop block when cross cutting 10. Raise blade 1/4” above stock

Operational Safety Rules 1. Operate with a positive and safe attitude (#1) 2. Disconnect power when not in use (#2) 3. Use the cross cut sled (#8)

Operational Safety Rules 4. Use a stop block when cutting multiples (# 9) 5. Ensure no one is behind you (# 11) 6. Use a push stick when stock is within 4” of blade(#13)

Operational Safety Rules 7. Stand comfortably (#14) 8. Stand to the left of the blade (#15) 9. Make sure the blade has stopped turning (#16)

Table Saw

Partners • Find who has the matching card

Grade 7 Topics • Belt / Disc Sander • Scroll Saw • Drill Press

Grade 8 Topics • • • Band saw Scroll Saw Router Drill Press Belt / Disc Sander

Grade 9 Topics • • • Band saw Scroll Saw Router Drill Press Compound Miter Saw Belt / Disc Sander