Lecture 7 Algorithmic Approaches Justification Any estimate of

Lecture 7 – Algorithmic Approaches Justification: Any estimate of a phylogenetic tree has a large variance. Therefore, any tree that we can demonstrate to be optimal (under some criterion) is not guaranteed to be the true tree. A tree produced by a fast algorithm may be just as close to the true tree as the optimal tree. It makes little sense to waste time & resources searching for the optimal tree. In my view, this is true under some limited contexts (e. g. , identifying a tree for evaluation of models), but it’s probably a bad idea to make it one’s default position.

UPGMA - Phenetic clustering Steps: 1) Identify the most similar pair of taxa (i. e. , that pair with the smallest Di, j). 2) Merge them into a composite OTU (called i/j), & place each at the end of a branch (Di, u & Dj, u) of length Di, j/2. 3) Create a new matrix with the distances to composite taxon i/j calculated as the average of all pairwise comparisons: Dk, i/j = (ni. Dk, i + nj. Dk, j) / (ni + nj), where ni is the number of taxa in the cluster. 4) Iterate until all taxa have been added to the cluster.

UPGMA - Phenetic clustering OTU-1 ----- OTU-1 OTU-2 OTU-3 OTU-4 OTU-5 OTU-2 0. 17 ---- OTU-1/2 OTU-3 OTU-4 OTU-5 OTU-1/2 OTU-3 ------0. 255 ----- OTU-3 OTU-4 OTU-5 0. 21 0. 31 0. 23 0. 30 0. 34 0. 21 ----0. 28 0. 39 ----0. 43 ---- OTU-4 0. 325 0. 28 ----- OTU-5 0. 22 0. 39 0. 43 ----- Italics are average distances. Plain text was taken from original matrix.

UPGMA - Phenetic clustering The same matrix: OTU-1/2 OTU-3 OTU-4 OTU-5 OTU-1/2 OTU-3 ------0. 255 ----- OTU-4 0. 325 0. 28 ----- OTU-5 0. 22 0. 39 0. 43 ----- Again, we erect a new matrix with composite OTU-1/2/5.

UPGMA - Phenetic clustering Now in generating the new matrix, we take the unweighted average of the distances (each pairwise distance among members of the composite OTU is weighted equally). OTU-1/2/5 OTU-3 OTU-4 OTU-1/2/5 ------- D 1/2/5, 3 = [(0. 255 * 2) + 0. 39] / 3 = 0. 300 D 1/2/5, 4 = [(0. 325 * 2) + 0. 43] / 3 = 0. 360 OTU-3 0. 300 ------- OTU-4 0. 360 0. 28 -------

UPGMA - Phenetic clustering OTU-1/2/5 OTU-3/4 ------0. 330 ------- OTU-1/2/5 OTU-3/4 And D 1/2/5, 3/4 = [(0. 30 * 3) + (0. 36 * 3)] / 6 = 0. 330 0. 055 0. 025 Thus, the distance from the root to any tip is 0. 330 / 2 = 0. 165. A UPGMA tree will be a good estimate of the phylogeny if, and only if, the evolution of the group has been very clock like (rates don’t change at all along branches) and if distances are perfectly additive, but remember that this is not its intended use.

Star Decomposition (e. g. , Neighbor Joining)

Star Decomposition – Neighbor Joining This method starts by converting the raw distance matrix to corrected distance matrix. 1. First, for each taxon i, the net divergence, ri, from all other is calculated. 2. The corrected matrix is given by: Mi, j = di, j – [ri / (n - 2)] – [rj / (n - 2)] 3. The minimum Mi, j (the shortest corrected distance) identifies the two taxa to be united to an ancestral node (u). Branch lengths are calculated. 4. A new matrix is calculated by replacing taxa i and j with their ancestral node u. 5. If more than two nodes remain, reset n = n – 1 and return to step 1. If only two nodes remain, vi, j = di, j.

Star Decomposition – Neighbor Joining A worked example using the same matrix we used for UPGMA 1. First, for each taxon i, the net divergence, ri, from all other is calculated. 2. The corrected matrix is given by: Mi, j = di, j – [ri / (n - 2)] – [rj / (n - 2)] 1 2 3 4 5 OTU-1 -------0. 477 -0. 490 -0. 450 -0. 497 OTU-2 0. 17 -------0. 433 -0. 453 -0. 550 OTU-3 0. 21 0. 30 -------0. 566 -0. 533 OTU-4 0. 31 0. 34 0. 28 -------0. 443 OTU-5 ri /(n-2) 0. 23 0. 92 0. 307 0. 21 1. 02 0. 340 0. 39 1. 18 0. 393 0. 43 1. 36 0. 453 ------ 1. 26 0. 420 3. The minimum Mi, j (the shortest corrected distance) identifies the two taxa to be united to an ancestral node (u).

Star Decomposition – Neighbor Joining 3. This new node u has three branches emanating from it: one to terminal i, one to terminal j, and one to the rest of the tree. v 3, u = d 3, 4 / 2 + (r 3 /3 – r 4 /3 ) / 2 = 0. 28 / 2 + (0. 393 – 0. 453) / 2 = 0. 11 v 4, u = d 3, 4 - v 3, u = 0. 28 – 0. 11 = 0. 17

Star Decomposition – Neighbor Joining 4. A new matrix is generated, with ancestral taxon u replacing i & j (here, terminals, 3 & 4). dk, u = ( di, k + dj, k – di, j ) /2 3 dk, 3 u k dk, 4 d 1, u = ( d 1, 3 + d 1, 4 – d 3, 4 ) /2 = (0. 21 + 0. 31 – 0. 28) / 2 = 0. 12 d 2, u = (d 2, 3 + d 2, 4 – d 3, 4 ) /2 = (0. 30 + 0. 34 – 0. 28) / 2 = 0. 18 d 5, u = (d 5, 3 + d 5, 4 – d 3, 4 ) /2 = (0. 39 + 0. 43 – 0. 28) / 2 = 0. 27 1 2 5 u OTU-1 -------0. 370 -0. 385 -0. 425 OTU-2 0. 17 -------0. 425 -0. 385 OTU-5 0. 23 0. 21 -------0. 370 Node u 0. 12 0. 18 0. 27 ------- d 3, 4 4 ri /(n – 2) 0. 52 0. 260 0. 56 0. 280 0. 71 0. 355 0. 57 0. 285

Star Decomposition – Neighbor Joining 5. So the star is decomposed further by uniting node u and OTU-1 with an ancestral node w, and the two branch lengths are calculated as follows: v 1, w = d 1, u / 2 + (r 1/2 – ru/2) / 2 = 0. 12 / 2 + (0. 260 – 0. 285) / 2 = 0. 046 vu, w = d 1, u – v 1, w = 0. 12 – 0. 046 = 0. 074 We have three nodes now, w, 2, & 5, so we iterate.

Star Decomposition – Neighbor Joining Set n = 3 & calculate distances from node w to the remaining OTU’s 2 and 5. Just as we did in step 3, we re-calculate the distance matrix: d 2, w = ( d 1, 2 + du, 2 – d 1, u ) /2 = (0. 17 + 0. 18 – 0. 12) / 2 = 0. 115 d 5, w = (d 1, 5 + du, 5 – d 1, u ) /2 = (0. 23 + 0. 28 – 0. 12) / 2 = 0. 195 2 5 w OTU-2 -------0. 510 -0. 520 OTU-5 0. 21 -------0. 510 Node w 0. 115 0. 195 ------- ri /(n – 2) 0. 325 0. 395 0. 310 vy, 2 = d 2, w / 2 + (r 2/1 – rw/1) / 2 = 0. 115 / 2 + (0. 325 – 0. 310) / 2 = 0. 065 vy, w = 0. 115 – 0. 065 = 0. 050

Star Decomposition – Neighbor Joining Finally, we calculate the distance from node y to OTU – 5: d 5, y = ( dw, 5 + d 2, 5 – d 2, w ) /2 = (0. 195 + 0. 21 – 0. 115) / 2 = 0. 145 = v 5, y

Star Decomposition – Neighbor Joining The number of calculations decreases as we decompose the star tree. NJ is not phenetic. It is explicitly calculating ancestors and parsing similarity into ancestral vs. derived. Neighbor joining is often interpreted as an approximation to the ME solution. An important modification to the neighbor-joining algorithm, BIONJ incorporates variances and covariances of di, j

The UPGMA and NJ trees are different for this matrix. NJ Tree UPGMA Tree

Stepwise Addition Start with three taxon tree, compute its score under some criterion (usually an ML or MP), and add a fourth in the manner that incurs the smallest decrease in optimality. A B C D E 1 1 0 2 0 0 1 1 0 Characters 3 4 5 0 1 1 1 0 0 0 1 1 1 1 1 6 0 0 1 1 0 There are 3 possible places to add taxon D, indicated by numbers 1 – 3. The optimality score is computed for each of these:

Stepwise Addition Option 1 is chosen because it has the shortest in length (i. e. , is optimal).

Stepwise Addition Again, characters are optimized on each of these 5 possibilities: Here, we’ve used stepwise addition build a tree(s) using parsimony. The number of calculations increases as we proceed.

Stepwise Addition sequence is critical. The method is starting-point dependent, so different addition sequences can produce different stepwise addition trees. Options: As is – In the order that the taxa appear in the matrix. Shortest – One may check all triplets, choose that which has the shortest tree and, at each step, assess all candidates, and choose that which adds least length. Random – One may use random addition sequences and replicate a number of times. For clean data, there should be only small differences in the stepwise addition tree, but for most real data there will be multiple stepwise addition trees. We’ll make use of this in searching tree space.

Quartet Methods For 5 taxa, there are 5 quartets: {1, 2, 3, 4} {1, 2, 3, 5} {1, 2, 4, 5} {1, 3, 4, 5} {2, 3, 4, 5} ((1, 2)3, 4) ((1, 2)3, 5) ((1, 2)4, 5) ((1, 3)4, 5) ((2, 3)4, 5) ((1, 3)2, 4) ((1, 3)2, 5) ((1, 4)3, 5) ((2, 4)3, 5) ((1, 4)2, 3) ((1, 5)2, 4) ((1, 5)3, 4) ((2, 5)3, 4) There is a final quartet puzzling step that assembles optimal quartets: ((1, 3), 5, (2, 4)).