Lecture 16 n n Generators Self Inductance AC

  • Slides: 19
Download presentation
Lecture 16 n n Generators Self Inductance AC circuits RLC circuits

Lecture 16 n n Generators Self Inductance AC circuits RLC circuits

Application – Tape Recorder n A magnetic tape moves past a recording and playback

Application – Tape Recorder n A magnetic tape moves past a recording and playback head n n n The tape is a plastic ribbon coated with iron oxide or chromium oxide To record, the sound is converted to an electrical signal which passes to an electromagnet that magnetizes the tape in a particular pattern To playback, the magnetized pattern is converted back into an induced current driving a speaker

Fig. 20 -19, p. 672

Fig. 20 -19, p. 672

Fig. 20 -19 a, p. 672

Fig. 20 -19 a, p. 672

Fig. 20 -19 b, p. 672

Fig. 20 -19 b, p. 672

Generators n Alternating Current (AC) generator n n n Converts mechanical energy to electrical

Generators n Alternating Current (AC) generator n n n Converts mechanical energy to electrical energy Consists of a wire loop rotated by some external means There a variety of sources that can supply the energy to rotate the loop n These may include falling water, heat by burning coal to produce steam

AC Generators, cont n Basic operation of the generator n n As the loop

AC Generators, cont n Basic operation of the generator n n As the loop rotates, the magnetic flux through it changes with time This induces an emf and a current in the external circuit The ends of the loop are connected to slip rings that rotate with the loop Connections to the external circuit are made by stationary brushes in contact with the slip rings

Fig. P 20 -30, p. 688

Fig. P 20 -30, p. 688

AC Generators, final n The emf generated by the rotating loop can be found

AC Generators, final n The emf generated by the rotating loop can be found by ε =2 B ℓ v =2 B ℓ sin θ n If the loop rotates with a constant angular speed, ω, and N turns ε = N B A ω sin ω t n n ε = εmax when loop is parallel to the field ε = 0 when the loop is perpendicular to the field

AC Generators – Detail of Rotating Loop n n n The magnetic force on

AC Generators – Detail of Rotating Loop n n n The magnetic force on the charges in the wires AB and CD is perpendicular to the length of the wires An emf is generated in wires BC and AD The emf produced in each of these wires is ε= B ℓ v = B ℓ sin θ

DC Generators n n n Components are essentially the same as that of an

DC Generators n n n Components are essentially the same as that of an ac generator The major difference is the contacts to the rotating loop are made by a split ring, or commutator Demo 1 Demo 2

DC Generators, cont n n n The output voltage always has the same polarity

DC Generators, cont n n n The output voltage always has the same polarity The current is a pulsing current To produce a steady current, many loops and commutators around the axis of rotation are used n The multiple outputs are superimposed and the output is almost free of fluctuations

p. 674

p. 674

Motors n Motors are devices that convert electrical energy into mechanical energy n n

Motors n Motors are devices that convert electrical energy into mechanical energy n n A motor is a generator run in reverse A motor can perform useful mechanical work when a shaft connected to its rotating coil is attached to some external device

Motors and Back emf n n n The phrase back emf is used for

Motors and Back emf n n n The phrase back emf is used for an emf that tends to reduce the applied current When a motor is turned on, there is no back emf initially The current is very large because it is limited only by the resistance of the coil

Motors and Back emf, cont n n n As the coil begins to rotate,

Motors and Back emf, cont n n n As the coil begins to rotate, the induced back emf opposes the applied voltage The current in the coil is reduced The power requirements for starting a motor and for running it under heavy loads are greater than those for running the motor under average loads

Self-inductance n Self-inductance occurs when the changing flux through a circuit arises from the

Self-inductance n Self-inductance occurs when the changing flux through a circuit arises from the circuit itself n n As the current increases, the magnetic flux through a loop due to this current also increases The increasing flux induces an emf that opposes the change in magnetic flux As the magnitude of the current increases, the rate of increase lessens and the induced emf decreases This opposing emf results in a gradual increase of the current

Self-inductance cont n The self-induced emf must be proportional to the time rate of

Self-inductance cont n The self-induced emf must be proportional to the time rate of change of the current n n L is a proportionality constant called the inductance of the device The negative sign indicates that a changing current induces an emf in opposition to that change

Self-inductance, final n n The inductance of a coil depends on geometric factors The

Self-inductance, final n n The inductance of a coil depends on geometric factors The SI unit of self-inductance is the Henry n n 1 H = 1 (V · s) / A You can determine an expression for L