KXTDENCP New FeaturesFunctions Ver 4 Edition7 Panasonic System

KX-TDE/NCP New Features/Functions Ver. 4 (Edition-7) Panasonic System Networks CO. , LTD.

“ New Features/Functions - 1 The new features/functions are available from, - KX-NCP 500/1000 MPR Ver. 4. - KX-TDE 100/200/600 MPR Ver. 4. Note Vo. IP Expansion - IP-TSW Speech Path - 64 ch SIP Trunk - Vo. IP Channel Capacity - DECT-CS on NCP Network Feature Enhancement - Message Waiting - Absent Message - Called party name display before answer - Call Waiting Network ICD-Group (UCD is supported) Improved Conference Group Function Improved Conference Features Paging to DECT Call-FWD CLIP Improved Centralized VM Function New MPR Required A/K is needed A/K is needed

New Features/Functions - 2 “ The new features/functions are available from, - KX-NCP 500/1000 MPR Ver. 4. - KX-TDE 100/200/600 MPR Ver. 4. Note Improved Call-FWD N/A Function (Ringing after C-FWD) Improved CA integration Alternative call if Vo. IP call fails Improve Vo. IP (H. 323) Connection - Support Non-Fast Connect - H 323 -ID registration Other Improvements - BSS Operation Programming Reserve Bit Function A/K is needed

Vo. IP Expansion - IP-TSW Speech Path - 64 ch SIP Trunk - Vo. IP Channel Capacity - DECT-CS on NCP

“ Vo. IP Expansion Ver. 4 Improvements PBX Version IP-TSW Speech Path (ch) (*1) SIP-Trunk (ch) IP-PT SIP Ext (ch) IP-CS (Units) TDE 600 TDE 100/200 NCP 1000 Ver. 3 Ver. 4 Ver. 2 Ver. 4 49 113 32 64 128 128 64 16 16 8 NCP 500 Ver. 2 Ver. 4 49 113 8 40 IP-PT 128 32 SIP 16 8 64 128 16 *1) New MPR card is needed. Trunk/Extension IP-Trunk IP-Extension Protocol H. 323 SIP Trunk IP-PT SIP-Ext. IP-CS Ver. 4 32 ch (*2) 64 ch 128 ch (16 units) TTL 64 ch 128 ch *2) H. 323 IP-Trunk of NCP 500 expands 32 ch, same as NCP 1000, TDE 100/200/600.

“ IP-TSW Speech Path (113 path) -1 New MPR Card + Ver. 3 = 49 path Old MPR Card + Ver. 4 = 49 path New MPR Card + Ver. 4 = 113 path CO IP Trunk Legacy MPR DSP IP-Ext. IP CS How to identify new H/W New MPR card is needed.

IP-TSW Speech Path (113 path) - 2 “ How to identify new H/W Old H/W Should be “XA” New H/W

“ 64 ch SIP Trunk -1 Ver 4. 0 TDE 100/200/600 16 ch x 2 16 ch x 4 Ver 4. 0 NCP 1000 Ver. 2 16 ch x 4 NCP 500 Ver. 2 8 ch x 1 Only Software upgrade. 16 ch x 4

“ 64 ch SIP Trunk -2 Ver 2/3 16 ch x 2 Ver. 2/3 supports 32 ch SIP Trunk. Two contracts/accounts (16 ch + 16 ch) Ver 4. 0 64 ch x 1 Ver. 4 supports 64 ch SIP Trunk. Supports 64 ch by one contract/account New PCMC Channel Attribute Programming Menu

“ DSP Power Vo. IP Channel Capacity - 1 DSP Resource Source -1 Source - 2 Traditional (CO/Ext. ) IP-Ext. (G 711) IP-Ext. (G 729) IP-CS (G 711) IP-CS (G 729) IP-Ext. /IP-CS (G 711) IP-Ext. /IP-CS (G 729) IP-Trunk (G 711) IP-Trunk (G 729) IP-Trunk (G 711) IP-Trunk (G 729) IP-Ext. /IP-CS (G 711) IP-Ext. /IP-CS (G 729) DSP Resource 2 3 5 5 1 2 4 4 2 4 5 6 8 8 3 5 6 7 9 9 2 3 5 6 8 8 DSP DSP -4 -16 -64 16 64 256 DSP-64 DSP-4/16

“ Vo. IP Channel Capacity - 2 The max. number of simultaneous telephone calls (NCP 1000/500). Talking Party IP-Trunk IP-PT IP-Trunk SIP IP-Trunk IP-CS IP-Trunk Legacy Ext G 711 G 711 G 729 G 729 G 711 G 729 G 711 G 729 NCP 1000 NCP 500 DSP DSP DSP 4 16 64 8 32 32 64 2 12 32 42 2 8 32 32 64 2 12 32 42 2 5 32 3 18 32 50 2 9 32 35 1 5 27 5 32 32 44 5 28 28 2 12 32 44 2 12 28 SIP Trunk H. 323 Trunk [Restriction Key] DSP Power-1 Number of TDMIP Channels Number of Trunks Number of Handsets. DSP Power -2

“ Vo. IP Channel Capacity - 3 The max. number of simultaneous telephone calls (NCP 1000/500). Talking Party Legacy-CO IP-PT Legacy-CO SIP Legacy-CO IP-CS Legacy-Ext IP-PT Legacy-Ext SIP Legacy-Ext IP-CS G 711 G 729 G 711 G 729 NCP 1000 DSP DSP 4 16 64 64 4 16 64 16 44 44 4 16 44 DSP 4 16 4 16 4 NCP 500 DSP 16 64 16 28 16 DSP 64 64 28 28 28 [Restriction Key] DSP Power-1 Number of TDMIP Channels Number of Trunks Number of Handsets. DSP Power -2

“ Vo. IP Channel Capacity - 4 The max. number of simultaneous telephone calls (NCP 1000/500). Talking Party G 711 G 711 G 729 G 729 G 711 G 729 IP-CS IP-PT IP-CS SIP IP-CS NCP 1000 DSP DSP 4 16 64 8 32 56 3 12 42 2 8 32 32 3 12 32 2 8 32 NCP 500 DSP 4 16 8 32 3 12 2 8 DSP 64 56 42 32 32 [Restriction Key] DSP Power-1 Number of TDMIP Channels Number of Trunks Number of Handsets. DSP Power -2

“ Vo. IP Channel Capacity - 5 The max. number of simultaneous telephone calls (TDE 100/200/600). Talking Party IP-Trunk IP-PT IP-Trunk SIP IP-Trunk IP-CS IP-Trunk Legacy Ext G 711 G 711 G 729 G 729 G 711 G 729 G 711 G 729 TDE 100/200 TDE 600 DSP DSP DSP 4 16 64 32 32 64 12 32 42 8 32 18 32 50 9 32 35 5 27 32 32 64 12 32 50 SIP Trunk H. 323 Trunk [Restriction Key] DSP Power-1 Number of TDMIP Channels Number of Trunks Number of Handsets. DSP Power -2

“ Vo. IP Channel Capacity - 6 The max. number of simultaneous telephone calls (TDE 100/200/600). Talking Party Legacy-CO IP-PT Legacy-CO SIP Legacy-CO IP-CS Legacy-Ext IP-PT Legacy-Ext SIP Legacy-Ext IP-CS G 711 G 729 G 711 G 729 TDE 100/200 DSP DSP 4 16 64 64 113 16 64 64 113 16 64 TDE 600 DSP 4 16 64 16 64 16 DSP 64 113 64 113 64 [Restriction Key] DSP Power-1 Number of TDMIP Channels Number of Trunks Number of Handsets. DSP Power -2

“ Vo. IP Channel Capacity - 7 The max. number of simultaneous telephone calls (TDE 100/200/600). Talking Party G 711 G 711 G 729 G 729 G 711 G 729 IP-CS IP-PT IP-CS SIP IP-CS TDE 100/200 DSP DSP 4 16 64 32 56 12 42 8 32 TDE 600 DSP 4 16 32 12 8 DSP 64 56 42 32 [Restriction Key] DSP Power-1 Number of TDMIP Channels Number of Trunks Number of Handsets. DSP Power -2

“ DECT-CS on NCP The max. number of CS/PS. CS factor KX-TDA 0158 CS KX-TDA 0141/0155 KX-NCP 0158 Max. CS factor Max. PS 2 1 2 Ver. 4 NCP 500 NCP 1000 2 4 3 5 4 8 7 11 6 8 16 16 12 16 32 32 64 64

Network Feature Enhancement

Network Feature Enhancement The following features are newly supported from Ver. 4 1 When calling extension in other PBX - Leave Message Waiting - Absent Message Display - Called party name display before answer 2 When extension in other PBX is busy - Call Waiting - Busy Override - Call Back - Call Monitor - Leave Message Waiting 3 When extension in other PBX is DND - DND Override, DND tone and LCD 4 Incoming call from extension in other PBX - Ring tone (Single or Double) as extension call - Call Waiting - Call FWD / DND as extension call - Automatic answer as extension call - Extension call block by COS-COS 5 Incoming call to extension in other PBX - Directed Call Pickup “

Network Feature Enhancement - 1 Message Waiting Ext. 1001 A/K is needed Call “ Ext. 2001 Vo. IP-Net Free/Busy 1 - Ext. 1001 calls Ext. 2001 (Free) 2 - Ext. 2001 does not answer. 3 - Press “Message Waiting” button on Ext. 1001. 4 - The Message Waiting LED on Ext. 2001 turns Red. - Ext. 2001 can call back to Ext. 1001 press “Message Waiting” button. 1 - Ext. 1001 calls Ext. 2001 (Busy) 2 - Ext. 1001 receive “Busy Tone” 3 - Press “Message Waiting” button on Ext. 1001. 4 - The Message Waiting LED on Ext. 2001 turns Red. - Ext. 2001 can call back to Ext. 1001 press “Message Waiting” button. The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 2 Absent Message Display Ext. 1001 1. Call A/K is needed 2. Send “Go Home” “ Ext. 2001 Vo. IP-Net Absent Message 1 - Ext. 1001 calls Ext. 2001 (Absent Message “Go Home) “Go Home” 2 - “Go Home” is displayed on Ext. 1001. Go Home The function works over, Extension Numbering & PBX Numbering.

“ Network Feature Enhancement - 3 Calling party name display before answer (Already Supported) 1. Call Ext. 2001 2. Send “Tanaka” Vo. IP-Net Ext. 1001 Tanaka A/K is needed 1001: Tanaka Ver. 4 Internal call Tanaka 1001 Before Ver. 4 External call 1 - Ext. 1001 (Tanaka) calls Ext. 2001 2 - Calling party name (Tanaka) is displayed on Ext. 2001. The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 4 “ Called party name display before answer Ext. 1001 1. Call 2. Send “Tanaka” Vo. IP-Net 3. Send “Honda” A/K is needed Ext. 2001 Honda 2001: Honda 1 - Ext. 1001 (Tanaka) calls Ext. 2001 2 - Calling party name (Tanaka) is displayed on Ext. 2001. 3 - Called party name (Honda) is displayed on Ext. 1001. The function works over, Extension Numbering & PBX Numbering.

“ Network Feature Enhancement - 5 Call Wait A/K is needed 3. Press “WAIT” 1. Call 2. Send “Busy” Info. Vo. IP-Net Call waiting : ON Ext. 2001 4. Call Wait Ext. 1001 Talking 1 - Ext. 1001 calls Ext. 2001 (Busy) 2 - Ext. 1001 LCD 2001: Busy WAIT OVER C. BCK Ext. 2002 3 - Press “WAIT” button. 4 - Call waiting on Ext. 2001. Call waiting (Ext. 2001) has to be “ON”. The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 6 Busy Override A/K is needed 3. Press “OVER” 1. Call 2. Send “Busy” Info. 4. Override “ Ext. 2001 Vo. IP-Net Ext. 1001 Talking 1 - Ext. 1001 calls Ext. 2001 (Busy) 2 - Ext. 1001 LCD 2001: Busy WAIT OVER C. BCK Ext. 2002 3 - Press “OVER” button. 4 - We can override (Barge-in) the communication between Ext. 2001 and 2002. The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 7 Call Monitor A/K is needed Ext. 1001 1. Call 2. Send “Busy” Info. 3. Press “ 5” 4. Monitor “ Ext. 2001 Vo. IP-Net Talking 1 - Ext. 1001 calls Ext. 2001 (Busy) 2 - Ext. 1001 LCD 2001: Busy WAIT OVER C. BCK Ext. 2002 3 - Press “ 5” button. 4 - We can monitor the communication between Ext. 2001 and 2002. The function works over, Extension Numbering & PBX Numbering.

Network Feature Enhancement - 8 “ Related program for Call Monitor/Busy Override Ext. 1001 Monitor/Busy Override Ext. 2001 Busy Vo. IP-Net Related program. Talking Ext. 2002

Network Feature Enhancement - 9 “ Related program for Busy Override Ext. 1001 Monitor/Busy Override Ext. 2001 Vo. IP-Net Related program. Talking Ext. 2002

Network Feature Enhancement - 10 “ Call Back 3. Press “C. BAK” 1. Call 2. Send “Busy” Info. Ext. 2001 Busy Vo. IP-Net Ext. 1001 Busy 1 - Ext. 1001 calls Ext. 2001 (Busy) 2 - Ext. 1001 LCD 2001: Busy WAIT OVER C. BCK 3 - Press “C-BCK” button. 4 - When Ext. 2001 became idle, Ext. 1001 starts ring. (Call back starts) The function works over, Extension Numbering & PBX Numbering.

“ Network Feature Enhancement - 11 DND A/K is needed 3. Press “OVER” 1. Call 2. Send “DND” Info. Ext. 2001 Busy 4. Ring Vo. IP-Net Ext. 1001 DND 1 - Ext. 1001 calls Ext. 2001 (DND) 2 - Ext. 1001 LCD 2001: Do Not Disturb OVER We can see the other end set to “DND” - “DND” Tone on Ext. 1001 3 - Press “OVER” button. 4 - Ext. 2001 starts ringing. The function works over, Extension Numbering & PBX code Numbering.

Network Feature Enhancement - 12 DND 3. Press “OVER” 1. Call A/K is needed 2. Send “DND” Info. “ Ext. 2001 Busy 4. Ring Vo. IP-Net Ext. 1001 Related program. DND

Network Feature Enhancement - 13 “ Ring tone (Single or Double) as extension call Ext. 1001 1. Call A/K is needed Ext. 2001 Busy 2. Ring Vo. IP-Net 1 - Ext. 1001 calls Ext. 2001 2 - Ext. 2001 starts ringing. Ver. 4. 0 : Internal call ring tone. Before Ver. 4. 0 : External call ring tone. The function works over, Extension Numbering & PBX code Numbering.

Network Feature Enhancement - 14 Auto Answer Ext. 1001 1. Call A/K is needed “ Ext. 2001 Busy Vo. IP-Net 1 - Ext. 1001 calls Ext. 2001 2 - Ext. 2001 answers the call automatically. Ver. 4. 0 : Possible Before Ver. 4. 0 : No possible Internal call Auto Answer = Enable The function works over, Extension Numbering & PBX code Numbering.

“ Network Feature Enhancement - 15 Call-FWD setting on Ext. 2001 Ext. 1001 Ext. 2001 Busy A/K is needed Call PBX-1 Vo. IP-Net PBX-2 Call CO Ext. 2002 We can set different C-FWD destination on Ext. 2001 for external calls and other PBX call (Internal) calls. E. g. Internal call destination: Call from Ext. 1001 and Ext. 2002 External call destination: Call from external (Through PBX-1) The function works over, Extension Numbering & PBX code Numbering.

Network Feature Enhancement - 16 “ Pick up call (Direct call pick up) Ext. 1001 3. Pick up Ext. 2001 2. Ring Vo. IP-Net 1 - Ext. 2002 calls Ext. 2001 2 - Ext. 2001 starts ringing. 3 - Ext. 1001 can pick up the call on Ext. 2001 How to program ? 1. Call Ext. 2002 The function works over, Extension Numbering and PBX numbering.

Network Feature Enhancement - 17 “ Pick up call (Direct call pick up): Extension Numbering Ext. 1001 3. Pick up (Press a DSS (20**412001) Ext. 2001 2. Ring Vo. IP-Net Access code 1. Call Ext. No 20**412001 DSS The target PBX numbering plan + * *40 (Pick-up by group number) does not support A/K is needed

“ Network Feature Enhancement - 18 Pick up call (Direct call pick up): PBX Numbering Ext. 1001 3. Pick up (Press a DSS (72*411001) PBX code 1 Vo. IP-Net Access code Ext. 1001 2. Ring PBX code 2 1. Call Ext. No 72*411001 DSS TIE access + PBX number A/K is needed

Network Feature Enhancement - 19 “ Pick up call (Direct call pick up): CA Ver. 3 (Future Plan) Ext. 2001 2. Ring 3. Pick up Vo. IP-Net Ext. 1001 1. Call CA Ver. 3 CA Server Ext. 2002 Monitor A/K is needed

“ Network Feature Enhancement - 20 Paging with Pick up call (Direct call pick up) Ext. 2001 3. Pick up PBX-1 Vo. IP-Net PBX-2 Ext. 1001 2. Paging Ofiice-1 Ofiice-2 1. Call Ext. 2002 is a PBX-2 extension. Audio port Ext. 2002 1 - Ext. 2001 calls Ext. 2002 2 - On Ext. 2002 (Voice Call is available ➔ Paging) 3 - Ext. 1001 can pick up (72*412002) the call on Ext. 2002 A/K is needed

“ Network Feature Enhancement - 21 Improved Boss/Secretary function Ext. 1001 Call Ext. 1001 Ext. 2001 Vo. IP-Net Boss (C-FWD to Ext. 2001) Secretary When Ext. 2001 calls Ext. 1001. Ver. 4. 0 : Ext. 1001 starts ring. Before Ver. 4. 0 : Busy Tone A/K is needed The function works over, Extension Numbering & PBX code Numbering.

“ Network Feature Enhancement - 22 Internal call Block (COS-COS setting) Call COS Information Vo. IP-Net Ext. 1001 COS-1 Call Block A/K is needed Ext. 2001 COS-1 Ext. 1002 COS-2 Ext. 1001 (COS-1) calls Ext. 2001 (COS-1): Not Blocked Ext. 1002 (COS-2) calls Ext. 2001 (COS-1): Blocked The function works over, Extension Numbering & PBX code Numbering.

Network Feature Enhancement - 23 “ Auto answer enable/disable by COS Call COS Information Ext. 2001 Vo. IP-Net Ext. 1001 COS-2 Ext. 1002 COS-3 Calling Ext. 2001 Ext. 1001 (COS-2) Auto Answer Ext. 1002 (COS-3) Ringing Auto Answer=ON A/K is needed

Auto answer enable/disable by COS “ Internal call works this feature Ext. 2001 Vo. IP-Net Ext. 1001 Ext. 1002 Calling Ext. 2002 (COS-1) Ext. 2003 (COS-3) Ext. 1001 (COS-2) Ext. 1002 (COS-3) Ext. 2001 Auto Answer Ringing Auto Answer=ON Ext. 2002 COS-1 Call Ext. 2003 COS-3

Network ICD-Group

“ Network ICD-Group Before Ver. 4. Ext. 2001 CO Vo. IP-Net Call ICD-Group Ext. 1001 Ext. 1002 Virtual PS Ext. 1003 C-FWD = 2002 Ext. 2002 ICD-Group Ext. 1000 Ring

“ Network ICD-Group Ver. 4. Ext. 2001 CO Vo. IP-Net Call ICD-Group Ext. 1001 Ext. 1002 Virtual PS Ext. 1003 C-FWD = 2002 Ext. 2002 ICD-Group Ext. 1000 Ring (Already Supported) UCD (Ver. 4) Hunt (Ver. 4) Note: Automatic Log-out is not support for Virtual PS.

Improved Conference Group Function

Improved Conference Group Function - 1 “ Conference Group mode programming Ver. 4: Flexible Program Before Ver. 4: System Program

Improved Conference Group Function - 2 “ Conference Group mode programming (Ver. 4) Group-1: 8 -Party Conference Mode Owner Two-way One way N/A Group-2: Broadcast Owner Two-way One way N/A Total 32 Terminals Group-8: 8 -Party Conference Mode Owner Two-way

Improved Conference Group Function - 3 “ Joining external participants Before Ver. 4 Owner Conference Group Before a conference is established, the external participant cannot join. Owner Conference Group If an owner wants to have a conference with only external participants. ➔ How to achieve ?

Improved Conference Group Function - 4 “ Joining external participants Ver. 4 Auto Answer mode works for conference group call on Ver. 4. Advise solution Owner Conference Group 1. Call 3. Join 2. Conference is established. 4. Cuts the DPT. D-PT or Softphone Auto Answer = ON - An owner establishes a group conference with physical connection DPT or Softphone. - An external participant joins the conference. - The owner presses the DSS button of the D-PT twice. - Press “Flash”/”Recall” key. ➔ Cuts the D-PT from the conference.

“ Improved Conference Group Function - 5 Reserve Bit Function (0 A-6) Default (Disable) This is PSN plan Owner Conference Group Call Auto Answer = OFF 0 A-6=Disable A D-PT (Auto Answer = Off) in conference group: An owner establishes a group conference ➔ Compulsory D-PT Auto answer function Enable. 0 A-6=Enable The above function does not work.

Improved Conference Features

“ Improved Conference Features - 1 Before Ver. 4 Function Ext. 1001 Subscriber-A Owner CO Subscriber-B Three party conference. 1 - Ext. 1001 (Owner) holds three party conference. Subscriber- A, Subscriber-B 2 - Ext. 1001 on-hooks ➔ All connection disconnects. Customer wants to keep CO-to-CO connection.

Improved Conference Features - 2 Ver. 4 New Option CO-CO call Limitation Enable : Default (Before Ver. 4 New function) Disable : Option (Ver. 4 New function) “

Improved Conference Features - 3 “ Ver. 4 Function (CO-CO call Limitation = Disable) 1. Ext. 1001 (Owner) holds three party conference. Ext. 1001 Subscriber-A CO Owner Subscriber-B 2. Ext. 1001 on-hooks. 3. The PBX is keeping CO-to-CO connection. Ext. 1001 Subscriber-A CO Owner Subscriber-B NB: This operation does not work for conference group call.

Improved Conference Features - 4 “ Working scenario Subscriber-A Ext. 1001 CO Owner 1 - Ext. 1001 (Owner) holds three party conference. Subscriber- A and Ext. 1002 2 - Ext. 1001 on-hooks ➔ The PBX keeps Subscriber- A and Ext. 1002 connection.

Improved Conference Features - 5 “ Working scenario Ext. 1001 Subscriber-A Owner CO Vo. IP-Net 1 - Ext. 1001 (Owner) holds three party conference. Ext. 1002 Subscriber- A and Ext. 1002. 2 - Ext. 1001 on-hooks ➔ The PBX keeps CO to Ext. 1002 call.

Improved Conference Features - 6 “ Working scenario Ext. 1001 Owner Vo. IP-Net Ext. 1002 1 - Ext. 1001 (Owner) holds three party conference. Ext. 1002 and Ext. 1003 2 - Ext. 1001 on-hooks ➔ The PBX keeps Ext. 1002 to Ext. 1003 call.

Improved Conference Features - 7 “ Not working scenario Subscriber-A Ext. 1001 Owner CO Subscriber-B 1 - Ext. 1001 (Owner) holds four party conference. Subscriber- A, Subscriber-B and Ext. 1002. 2 - Ext. 1001 on-hooks ➔ All connections disconnect. Ext. 1002

Paging to DECT (by using auto answer/conference)

“ Paging to DECT - 1 Auto-answer function for DECT 2. Call Ext. 2001 Auto. Answer=ON 1. Call Ext. 2001 Ext. 1001 1. Ext. 1001 calls Ext. 2001 (Auto-Answer=ON) 2. The PBX calls Ext. 2001 3. Ext. 2001 speaker phone automatically ON. 3. Speaker automatically ON Auto-answer function also works a conference group call.

“ Paging to DECT - 2 Auto-answer function for Conference Group No. 1 2. Call 1. Dial *321# Ext. 1001 Ext. 2002 Ext. 2003 Auto. Answer=ON 4. Paging 3. Speaker automatically ON 1. Ext. 1001 holds a conference (*321#) 2. 2. The PBX calls pre-programmed DECT-PS 3. All DECT PS on the conference group automatically answer. Speaker phone automatically “ON”. 4. Ext. 1001 user can page.

“ Paging to DECT - 3 Conference Group No. 1 Ext. 2002 Ext. 2003 Ext. 1001 Auto. Answer=ON - DECT user and SLT user can make conference group call as well as PT user. - Hand over is supported for conference group call after DECT answers. (Ver. 3 does not support hand over for conference group call. ) - One DECT-PS needs one wireless channel. Broadcasting mode Enable Disable Max. member → → 32 8 Max. When paging starts, talker 8 DECT-PS cannot speak at first. 8 DECT-PS speak at first.

“ Paging to DECT - 4 Reserve Bit Function (0 A-7) Default (Disable) This is PSN plan Owner Conference Group Call Auto Answer = Off 0 A-7=Disable A PS (Auto Answer = Off) in conference group: An owner establish a group conference ➔ Compulsory PS Auto answer function Enable. 0 A-7=Enable The above function does not work.

Call-FWD CLIP

Call-FWD CLIP - 1 (Internal call) Subscriber-A CLIP ? ISDN 1 - Ext. 1000 calls Ext. 1001 2 - The call is re-routed to subscriber-A. 3 - CLIP? Ext. 1000 CLIP or Ext. 1001 CLIP? The PBX sends 477 -1001 as CLIP The PBX sends 477 -1000 as CLIP “ Ext. 1000 CLIP 477 -1000 Calls Ext. 1001 CLIP 477 -1001 C-FWD to Subscriber-A

Call-FWD CLIP - 2 (Internal call) Subscriber-A CLIP ? ISDN 1 - Ext. 1000 calls Ext. 6000 (ICG-D) 2 - The call is re-routed to subscriber-A. 3 - CLIP? Ext. 1000 CLIP or Ext. 2000 CLIP? “ Ext. 1000 CLIP 477 -1000 Calls ICD-G 6000 Ext. 2000 Dummy CLIP 477 -2000 PS C-FWD to Subscriber-A Ext. 1001 The PBX sends 477 -2000 as CLIP The PBX sends 477 -1000 as CLIP

Call-FWD CLIP - 3 (External call) “ Subscriber-A ISDN Subscriber-B 1 - Subscriber-A calls Ext. 1000 2 - The call is re-routed to subscriber-B 3 - CLIP? Subscriber-A CLIP or Ext. 1000 CLIP? The PBX sends 477 -1000 as CLIP The PBX sends Subscriber-A CLIP as CLIP Ext. 1000 CLIP 477 -1000 C-FWD to Subscriber-B

“ Call-FWD CLIP - 4 (External call) ICD-G 6000 Subscriber-A Ext. 1000 CLIP 477 -1000 ISDN Subscriber-B Dummy PS 1 - Subscriber-A calls Ext. 6000 (ICG-D) 2 - The call is re-routed to subscriber-B 3 - CLIP? Subscriber-A CLIP or Ext. 2000 CLIP? The PBX sends 477 -1000 as CLIP The PBX sends Subscriber-A CLIP as CLIP Ext. 2000 CLIP 477 -1000 C-FWD to Subscriber-B

Improved Centralized VM Function

“ Improved Centralized VM function - 1 VM transfer over network Ext. 2001 PBX-1 CO Vo. IP-Net PBX-2 1. Call 2. Press “VTR + 2001+# 3. Go to Ext. 2001 Mail BOX Ext. 1001 Ext. 2002 Mail-BOX Ext. 101 1001 (PBX-1) 102 2001 (PBX-2) 103 2002 (PBX-2) Centralized VM 1. Ext. 1001 receives a call. 2. Press the “VTR” button and dial remote extension number + #. 3. The call goes to Ext. 2001 mail Box.

“ Improved Centralized VM function - 2 VM transfer over network PBX-1 CO 2. Press “VTR + 1001 + # Vo. IP-Net Ext. 2001 PBX-2 1. Call 3. Go to Ext. 1001 Mail BOX Ext. 1001 Ext. 2002 Mail-BOX Ext. 101 1001 (PBX-1) 102 2001 (PBX-2) 103 2002 (PBX-2) Centralized VM 1. Ext. 2001 receives a call. 2. Press the “VTR” button and dial remote extension number + #. 3. The call goes to Ext. 1001 mail Box.

“ Improved Centralized VM function - 3 VM transfer over network PBX-1 CO 2. Press “VTR + NDSS Button Vo. IP-Net 1. Call 3. Go to Ext. 1001 Mail BOX Ext. 2001 PBX-2 NDSS (Ext. 1001) Ext. 1001 Ext. 2002 Mail-BOX Ext. 101 1001 (PBX-1) 102 2001 (PBX-2) 103 2002 (PBX-2) Centralized VM 1. Ext. 2001 receives a call. 2. Press the “VTR” button and Press the NDSS button for Ext. 1001. 3. The call goes to Ext. 1001 mail Box.

“ Improved Centralized VM function - 4 Transfer re-call Destination Ext. 2001 PBX-1 CO Vo. IP-Net PBX-2 1. Call 2. Transfer to Ext. 1002 Un-screened Ext. 1001 3. Does not answer Ext. 1002 C-FWD N/A to VM Centralized VM Mail-BOX Ext. 101 1001 (PBX-1) 102 1002 (PBX-1) 103 2001 (PBX-2) Step 4. Before Ver. 4 Transfer re-call to Ext. 1001 Ver. 4 The call is re-routed to the Centralized VM

Improved Call-FWD N/A Function

“ Improved Call-FWD N/A Function - 1 C-FWD N/A function before Ver. 4 Ext. 2001 Subscriber-A CO 3. Fwd to Subscriber-A 2. Ring. Call-FWD N/A to Subscriber-A N/A Timer=15 sec 1. Call Ext. 2002 1. Ext. 2002 calls Ext. 2001 2. Ext. 2001 starts ringing, 15 sec. 3. The call is forwarded to the subscriber-A ➔ Ext. 2001 stops ringing.

“ Improved Call-FWD N/A Function - 2 C-FWD N/A function Ver. 4 Ext. 2001 Subscriber-A CO 3. Fwd to Subscriber-A 2. Ring. Call-FWD N/A to Subscriber-A N/A Timer=15 sec 1. Call 1. Ext. 2002 calls Ext. 2001 2. Ext. 2001 starts ringing, 15 sec. 3. The call is forwarded to the subscriber-A A/K is needed Keep ring after FWD NA to CO Enable ➔ Ext. 2001 keeps ringing. Ext. 2002 Disable ➔ Ext. 2001 stops ringing. 4. The subscriber-A and Ext. 2001 can answer the call.

“ Improved Call-FWD N/A Function - 3 C-FWD N/A function Ver. 4 Ext. 2001 Subscriber-A CO 3. Fwd to Subscriber-A The Keep ring after FWD NA to CO Function is available on the following CO CO Type Available SIP/H. 323 G/W YES ISDN YES Analogue W/ Reverse W/O Reverse CPC Analogue Line E 1 T 1 LCO GCO/DID/E&M YES NO NO YES 2. Ring. Call-FWD N/A to Subscriber-A N/A Timer=15 sec 1. Call Ext. 2002

“ Improved Call-FWD N/A Function - 4 C-FWD N/A function Ver. 4 Ext. 2001 Subscriber-A CO 3. Fwd to Subscriber-A 2. Ring. Call-FWD N/A to Subscriber-A N/A Timer=15 sec 1. Call If Ext. 2001 DSS is assigned on other Ext. 1. Ext. 2002 calls Ext. 2001 ➔ DSS flashing. 2. 15 sec ➔ DSS flashing. Ext. 2002 3. The call is forwarded to the Subscriber. 4. The Subscriber does not answer ➔ DSS flashing. 5. The Subscriber answers ➔ DSS turns “Red”. Ext. 2001 This situation differs from the usual DSS display. Actually, Ext. 2001 is not busy, other extension call to Ext. 2001.

“ Improved Call-FWD N/A Function - 5 C-FWD N/A function Ver. 4 Ext. 2001 If Ext. 2001 is set C-FWD to Internal. 1. Ext. 2002 calls Ext. 2001 2. Ext. 2001 starts ringing, 15 sec. 3. The call is forwarded to Ext. 2003 4. Ext. 2001 stops ringing. 2. Ring. Call-FWD N/A Ext. 2003 N/A Timer=15 sec 1. Call Ext. 2002 3. Fwd to Ext. 2003

Improved CA integration

“ Improved CA integration Send system data to CA When CA user logs to PBX (Ver. 4), the PBX send “Manager” and “CA Chat Ability” information to CA. 2. Data 1. Log-in CA Client-1 Disable manager function from basic CA client Disable un-necessary chat Support from CA Ver. 3

“ Improved CA integration Absent Message is not automatically changed. Before Ver. 4 Absent status is displayed automatically by CA when PC is not used for pre programmed time. Not in used CA Display changed Customer does not like this change. 10 JUN. 09: 40 THU 09: 40 - * PROG INFO RING MENU Ver. 4 Absent status is not displayed from Ver. 4.

Alternative call if Vo. IP call is fails (CO call ➔ ARS ➔ Vo. IP call ➔ Failed ➔ CO call)

Alternative call if Vo. IP call fails - 1 Standalone system “ +44 (0)111 -2222 Telephone cost are high. PBX-Japan NTT-CO 0 -00 -44 -111 -2222 Dials 0 -00 -44 -111 -2222 Subscriber No. Country code International access code CO access code BT CO

“ Alternative call if Vo. IP call fails - 2 +44 (0)111 -2222 Using remote PBX and Vo. IP and ARS function Save cost !!! PBX-Japan NTT-CO BT CO 01112222 ARS=ON Vo. IP Net 80201112222 TG-2 PBX-UK Modify the dialled number by ARS table. Dials 0 -00 -44 -111 -2222

“ Alternative call if Vo. IP call fails - 3 +44 (0)111 -2222 Using remote PBX and Vo. IP and ARS function If Vo. IP Network is Down ? PBX-Japan NTT-CO BT CO ARS=ON Vo. IP Net = Down 80201112222 TG-2 PBX-UK Modify the dialled number by ARS table. Dials 0 -00 -44 -111 -2222

“ Alternative call if Vo. IP call fails - 4 +44 (0)111 -2222 Using remote PBX and Vo. IP and ARS function Modify the dialled number by Quick Dial table. A new function from Ver. 4. PBX-Japan NTT-CO BT CO ARS=ON 801 -00 -44 -111 -2222 Noresponse Vo. IP Net = Down 80201112222 TG-2 PBX-UK Modify the dialled number by ARS table. Checks Quick Dialling table The call is Vo. IP call ? NO YES Re-order Tone Dials 0 -00 -44 -111 -2222

Alternative call if Vo. IP call fails - 5 “ Programming ARS Select “On for Local Access Operation” Please do not select “On for any CO Access Operation” Modify the dialled number by ARS table.

Alternative call if Vo. IP call is failed - 6 “ Programming Quick Dial Need to Check Trunk access No. CO access No.

Alternative call if Vo. IP call fails - 7 “ Reserve Bit Function (09 -6) Default (Disable) From TDE/NCP V 4. The alternative call function on Ver. 4. CO call ➔ ARS ➔ Vo. IP call ➔ Failed ➔ CO call 09 -6=Disable The alternative call function works. CO call ➔ ARS ➔ Vo. IP call ➔ Failed ➔ CO call 09 -6=Enable The alternative call function does not work. CO call ➔ ARS ➔ Vo. IP call ➔ Failed ➔ Re-order tone

Improve Vo. IP (H. 323) Connection

Improve Vo. IP (H. 323) Connection - 1 “ Support Non-Fast Connect H 323 IP-G/W Virtual H 323 IP-G/W Call Vo. IP Net Call Receiving call (a non-Fast connect mode call): Before Ver. 4 : PBX does not accept the call. Ver. 4 : PBX accepts the call. This improvement is adapted only for virtual gate way. (Not for LPR card gate way)

Improve Vo. IP (H. 323) Connection - 2 “ Support Non-Fast Connect H 323 IP-G/W Virtual H 323 IP-G/W Call Vo. IP Net 2. Reply 1. Call 3. Connection? Making call: The TDE/NCP makes a call with fast connection mode. The other PBX replies with non fast connection mode. Before Ver. 4 : PBX does not accept this reply, disconnect the call. Ver. 4 : PBX accepts this reply This improvement is adapted only for virtual gate way. (Not for LPR card gate way)

Improve Vo. IP (H. 323) Connection - 3 “ Support Non-Fast Connect H 323 IP-G/W Virtual H 323 IP-G/W Call Vo. IP Net 2. Reply 1. Call 3. H. 245 Negotiation Making call: The TDE/NCP makes a call with fast connection mode. The other PBX replies with non fast connection mode. Before Ver. 4 : PBX does not accept this reply, disconnect the call. Ver. 4 : Support H. 245 Negotiation. This improvement is adapted only for virtual gate way. (Not for LPR card gate way)

“ Improve Vo. IP (H. 323) Connection - 4 Reserve Bit Function (06 -0): H 323 -ID registration Default (Disable) Gate Keeper Registration H 323 G/W LAN 06 -0=Disable The H 323 -ID registration is not possible. 06 -0=Enable The H 323 -ID registration is possible. (TDE Ver. 2) The PBX send “Zonename” information to the Gate keeper. (Ver. 4) The PBX send “Band Wide” information to the Gate keeper. (Ver. 4)

Other Improvements

“ Other Improvements BSS Operation Programming Before Ver. 4 (System Program) Ver. 4 (COS setting) Ext. 1001 (Operator: COS-1) Mainly un-screened call transfer. Ext. 1002 (Worker: COS-2) Mainly screened call transfer.

PC Maintenance Console (PCMC) for Ver. 4.

PCMC for KX-TDE/NCP Ver. 4. Please use U-PCMC Ver. 6. x. x. x “ KX-TDE 600 Ver. 6. 0. x. x or later KX-NCP 500/1000 Ver. 6. 1. x. x or later KX-TDE 100/200 Ver. 6. 2. x. x or later

Thank You Very Much For Your Attention

Modification History ➔ Edition-2 Page-11 ５ Page 72 TVR ➔ VTR Add Page 79 Page 81 CS ➔ CA Page 14 Page 39 Page 58 Page 59 Page 106 Ext. 2001 ➔ Ext. 2002 72*412001 ➔ 72*412002 CO-to-CO call ➔ CO to Ext. 1002 call. CO-to-CO call ➔ Ext. 1002 to Ext. 1003 call. 4. Ext. 2003 does not answer the call and the call is re-routed to VM. ➔ The call is re-routed to VM. ➔ Edition-4 Add Page 73.

➔ Edition-5 Page-51 : (Old) - The owner presses the DSS button of the D-PT. (New) - The owner presses the DSS button of the D-PT twice. - Press "Flash"/"Recall" key. Page-55 : (Old) CO-CO call Limitation Enable : Default (Ver. 4 New function) Disable : Option (Before Ver. 4 New function) (New) CO-CO call Limitation Enable : Default (Before Ver. 4 New function) Disable : Option (Ver. 4 New function) Page-56: (Old) Ver. 4 Function (CO-CO call Limitation = Enable) (New) Ver. 4 Function (CO-CO call Limitation = Disable) Page-72 : (Old) 2. Press “VTR + 2001 ➔ (New) 2. Press “VTR + 2001+# Page-74 : Add. Page-81 : (Old) If Ext. 2001 is set C-FWD to External. (New) If Ext. 2001 is set C-FWD to Internal. ➔ Edition-6 Page-2, 20 -26, 30 -34, 36 -39, 41 -42. Add: A/K is needed ➔ Edition-7 Page-40 Add: A/K is needed