IP over WDM network Fang Yu 294 Class
- Slides: 22
IP over WDM network Fang Yu 294 Class Presentation
Outline n n n History of WDM networks Current Internet: Multi-layer protocol stack between IP and WDM layers Future: IP directly over WDM n n Challenge Virtual Topology Reconfiguration Multi-layer routing One proposal: Optical Burst Switching technologies
History n In the late 70 s n n Before 1995 n n First fiber based optical transmission system Mostly a single high-speed optical channel All multiplexing done in electrical domain(TDM) 50 Mb/s to 10 Gb/s data services After 1995 n n n WDM allows simultaneously transmitting multiple high-speed channels on different frequencies (Up to 160 wavelengths today) 40 G per l (OC 768) Total link capacity = 160 l *40 G =6. 4 Tbps
Current Typical Protocol Stacks IP ATM SONET WDM
Transport Layer Model “Packet” 1/0 DCS Core ATM/IP Layers DACS III LA DS 3 (45 Mb/s) OC 48+ (2. 5+ Gb/s) Hard. Wired LA OTS 3/1 DCS ADM OTS OTS PHNX CHCG 3/1 DCS Layer 3/3 DCS Layer (DACS III) SONET ADM Layer CHCG Wavelength Path Crossconnect OTS (OTS: Optical Transport CHCG System) CHCG PHNX 3/1 DCS ADM Proprietary (20 -400 Gb/s) LA Service Layers CHCG ADM ADM 3/1 DCS LA 3/1 DCS DACS III ADM 4 E 4 E CHCG DS 1 (1. 5 Mb/s) DACS III PHNX ADM 4 E LA 1/0 DCS DS 3 (45 Mb/s) ATM/IP LA 4 E 1/0 DCS ATM/IP 1/0 DCS “Packet” Fiber Conduit/ Sheath Wavelength Mux Section Crossconnect Media Layer
Disadvantage of Current Multilayer Protocol Stack n Inefficient n n In IP over ATM over SONET over WDM network, 22% bandwidth used for protocol overhead Layers often do not work in concert n n Every layer now runs at its own speed. So, low speed devices cannot fill the wavelength bandwidth. When detecting of failure, different layers compete for protection n n Optical layer detects failure almost immediately, restores error in 2 us to 60 ms SONET layer detects failure in 2. 3– 100 us, restores error in 60 ms
Disadvantage of Current Multilayer Protocol Stack (Cont) n Functional overlap: So many layers are doing the same thing n n n Slow speed n n Routing Protections Electronic devices can not catch the transmission speed available at optical layer Latencies of connection
Historical Reason for Multi-layer SONET over WDM n n IP over ATM n n IP packets need to be mapped into ATM cells before transporting over WDM using SONET frame OEO conversions at every node is easier to build than all optical switch n Electronic Network Conventional WDM deployment is using SONET as standard interface to higher layers E/O O/E/O Electronic Network O/E/O E/O Electronic Network E/O Optical Core Electronic Network
Simplified Protocol Stacks? IP IP Frame Relay ATM SONET WDM-aware Electronic layer WDM Current Typical Protocol Stack Simplified Protocol Stack
IP Directly Over WDM? n n Establish high-speed optical layer connections (lightpaths) IP routers connected through lightpaths rather than fiber
Challenge for IP over WDM network n WDM-aware Electronic layer n n n n Reconfiguration and load balancing Protection and restoration Optical flow switching Network management/control Cross-layer optimization Reconfigurable (within milli-seconds) OXC Wavelength Converters 3 2 WC No converters 1 New request 1 3 With converters 1 New request 1 3
Virtual Topology Reconfiguration n Physical topology n n Virtual topology: a set of nodes interconnected by light-paths (wavelength) n n Seen by optical layer Seen by electronic layer Reconfigure of light-paths in WDM network by n n Changing the light path connectivity between electronic switches Tuning of the transmitter wavelength and the frequency-selectiveswitches A B C D
Virtual Topology Reconfiguration(Cont. ) Enable network to dynamically response to changing of traffic pattern n Load balancing Fixed 0. 1 Routing n Efficiency Blocking Probability n n Issues: n n n 0. 01 Reconfigurable Routing X 6 WDM ring, 20 nodes one transceiver/node call BW = 1 wavelength 0. 001 Time scale of changes Triggered by what mechanisms IP routing properties (e. g. stability) 0. 01 0. 02 0. 03 0. 04 Call arrival rate 0. 05
Multi-layer Routing n n IP layer routing is the bottleneck of present Internet Solution: Routing long duration flows at lower layers User 1 . . . Router 1 Network control Router 2 User 2 . . . Router 3 WDM layer • • • Conventional packet routing Optical bypass of intermediate routers for high volume traffic End-to end (user-to-user) flow of entire file bypassing routers LIDS
Switching all the packets in optical layer? n n n Requires intelligence in the optical layer Need to store packet during header processing Optical buffers are extremely hard to implement n n 1 pkt = 12 kbits @ 10 Gbps requires 1. 2 s of delay => 360 m of fiber) Optical Packet Switch still has a long way to go……………
Various Optical Switching Technologies
Optical Burst Packet Switching n Retrospect the goal of IP over WDM: n n n Avoid electronic bottlenecks Decrease the cost by simplifying the multiple layer architecture OBS is one proposal of how to realize such a network
Optical Burst Switching n Resources are allocated using one way reservation n n Sender sends a request Sender sends burst without waiting for an acknowledgement of its reservation request Switch does preparation for the burst when getting the request Bursts can have variable lengths Burst switching does not necessarily require buffering
Various OBSs n n n The schemes differ in the way bandwidth release is triggered. In-band-terminator (IBT) – header carries the routing information, then the payload followed by silence (needs to be done optically). Tell-and-go (TAG) – a control packet is sent out to reserve resources and then the burst is sent without waiting for acknowledgement. Refresh packets are sent to keep the path alive.
Main Characteristics of Optical Burst Switching n n There is a time separation(offset time) between header and data Header and data are usually carried on different channels n n Header goes through sophisticated electronic processing Data is kept in optical domain
Conclusion n n Current IP over ATM over SONET over WDM network is inefficient and redundant Future IP directly over WDM network n n n Advantages n Less latency n Automatic provisioning n Higher bandwidth utilization Challenge of packet directly over WDM network n Optical buffer Optical burst switch is one of the proposed techniques to IP over WDM network
Reference n n n n n John Strand, “Optical Networking and IP over Optical”, Feb 4, 2002 Kumar N. Sivarajan, “IP over Intelligent Optical Networks”, Jan 5, 2001 Gaurav Agarwal, “A Brief Introduction to Optical Networks”, 2001 Yang Lihong, “Optical Burst Switching”, CMU networking seminar presentation Vincent W. S. Chan, “Optical Networks: Technology and Architecture” Eytan Modian, “WDM-Based Packet Networks”, IEEE Communication Magazine, March 1999 Ornan (Ori) Gerstel, Rajiv Ramaswami, , “Optical Layer Survivability—An Implementation Perspective”, IEEE Journal on selected areas in communications, October 2000 Eytan Modiano, Aradhana Narula-Tam, “Survivable lightpath routing: a new approach to the design of WDM-based networks”, IEEE JSAC, April 2002 R. Ramaswami and K. N. Sivarajan, Optical Networks: A Practical Perspective, San Francisco: Morgan Kaufmann, 1998.
- Wdm network
- Wdm network
- Art 294 a 311 cpc
- Cmpe 294
- Aaa 294
- 99 as a product of prime factors.
- Pages 294 and 295
- Bilangan biner dari 50
- In 1971 there were 294 105 females
- 216 cm2
- Mindylue
- Wdm concept
- Wdm concept
- Maintenance
- Tdm wdm fdm
- Multiplexación por división de longitud de onda (wdm)
- Wdm 990126350
- Fdm tdm wdm in computer networks
- Wdm ring
- Wdm
- Dwdm lambda
- Wdm
- Wdf_interrupt_config_init