Implementing Cisco Unified Mobility Features and Applications for

Outline § Cisco Unified Mobility Overview § Cisco Unified Mobility Call Flow § Cisco Unified Mobility Components § Cisco Unified Mobility Configuration © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -2

Cisco Unified Mobility Overview © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2

Cisco Unified Mobility Customer Cisco Unified Communications Manager Call to office number. Call to Mobile Voice Access directory number. Mobile Voice Access establishes a system to create enterprise calls from any location. PSTN Gateway Remote Phone Office Phone Mobile Connect lets remote and office phones ring simultaneously. § Cisco Unified Mobility has two components: Mobile Connect and Mobile Voice Access (MVA). § With Mobile Connect, calls placed to office phones ring the office phones and associated remote phone. § MVA allows users to call into the enterprise from any phone and place outgoing calls that appear to come from their office phone. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -4

Mobile Connect and MVA Characteristics Mobile Connect characteristics: § Receive calls on multiple devices by using a single phone number § Answer incoming calls on office or remote phone § Switch active calls between office and remote phone MVA characteristics: § Originate enterprise calls from any remote destination by: – Dialing to the enterprise MVA number – Entering ID (if required) and PIN – Entering destination number to be called § Called party sees the office phone number as the calling party § Switch active calls between office and remote phone © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -5

Cisco Unified Mobility Features § Single (office) number for multiple devices: – Enterprise caller ID preservation – Single enterprise voice mailbox § User-configurable access lists to permit or deny calling numbers that can ring a specific remote phone § User interface to enable or disable Cisco Unified Mobility: – Mobile Voice Access TUI – Cisco Unified Communications Manager user webpages § Access to enterprise features from remote phones using DTMF: – Softkeys can be used on phones with smart client installed. § Call logging (CDR) © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -6

Cisco Unified Mobility Call Flow © 2008 Cisco Systems, Inc. All rights reserved. CIPT

Mobile Connect Call Flow—Incoming Calls to Office Phone Cisco Unified Communications Manager Outside Caller Gateway 479 -5551555 511 -5552 XXX Call to 1 -511 -555 -2001 Mobile Connect PSTN Caller ID: 479 -555 -1555 Office Phone 2001 408 -555 -1001 Remote Phone of 2001 Outside caller calls office phone 2001 (dials 1 -511 -555 -2001). Mobile Connect rings office phone and remote phone. Call is picked up at remote phone; caller ID of outside caller is preserved at remote phone. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -8

Mobile Connect Call Flow—Internal Calls Placed from Remote Phone Cisco Unified Communications Manager Gateway 511 -5552 XXX Caller ID: 2001 Mobile Connect Office Phone 2001 2002 PSTN Call to 1 -511 -555 -2002 408 -555 -1001 Remote Phone of 2001 Remote phone calls internal phone 2002 (dials 1 -511 -555 -2002). Mobile Connect replaces caller ID (408 -555 -1001) of remote phone with directory number of associated office phone (2001). © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -9

MVA Call Flow Cisco Unified Communications Manager Voice. XML— Enter ID And PIN Outside Destination Gateway IVR Application 2999 511 -5552 XXX 479 -5551555 Caller ID: 511 -555 -2001 MVA Voice. XML PSTN Call to 1 -511 -555 -2999 Office Phone 2001 408 -555 -1001 Remote Phone of 2001 Remote phone dials MVA number (1 -511 -555 -2999). Caller is authenticated at Cisco Unified Communications Manager and requests call to outside destination 9 -1 -479 -555 -1555. Caller is connected to MVA media resource from where the outgoing call is placed on behalf of the office phone (2001). © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -10

Cisco Unified Mobility Components © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2

Cisco Unified Mobility Requirements Cisco Unified Mobility requires: § Cisco Unified Communications Manager 6. 0 § Cisco Unified Mobile Voice Access service activated § H. 323 or SIP gateway providing Mobile Voice Access IVR application § Out-of-band DTMF § Remote Destinations must be external devices © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -12

Cisco Unified Mobility Configuration Elements Configuration Element Name Configuration Element Function End User The end user is referenced by the office phone and remote destination profile. Mobile Connect and/or MVA must be enabled. A maximum number of remote destinations can be configured. Phone The office phone needs to be configured with an owner (i. e. , the end user). Remote Destination Profile A virtual phone device. Per office phone number, a shared line is configured. End user, (device) CSSs, and MOH audio sources are specified. One or more remote destinations are added. Remote Destination Associated with shared line(s) of remote destination profile. Configured with destination number. Optionally, access lists can be applied. Mobile Phone and Mobile Connect functions are selectively enabled. Access List Filters used to permit or deny incoming calls placed to the office phone to ring a remote destination. Permitted or denied caller IDs are specified. MVA Media Resource Media resource used to interact with the Voice. XML call application running on a Cisco IOS router. Only required for MVA. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -13

Shared Line Between Phone and Remote Destination Profile Line 1: 2001 Partition CSS etc. Office Phone 1 MAC Address Owner CSS etc. Line 1: 2002 Partition CSS etc. shared line Call to shared line rings office phone line and remote destination(s) associated with corresponding line of remote destination profile. © 2008 Cisco Systems, Inc. All rights reserved. Office Phone 2 MAC Address Owner CSS etc. shared line Remote Destination 1: 9 -1 -408 -5551001 Line 1: 2001 Partition CSS etc. Remote Destination 2: 9 -1 -479 -5551555 Line 2: 2002 Partition CSS etc. Remote Destination Profile User ID CSS Rerouting CSS etc. CIPT 2 v 6. 0— 4 -14

Relationship of Cisco Unified Mobility Configuration Elements Service Activation Softkeys MVA Service Mobility Softkey Owner Service Parameter Enable MVA, Enterprise Feature Access Owner Media Resources MVA Number, Localization IVR Application Voice. XML Call MVA Enter RD and PIN User Enable Mobility Enable MVA RD Limit User ID IP phone ACL RDP RD 1 Enable MC H. 323 Gateway RD 2 Enable MC ACL: Access List, MC: Mobile Connect, MVA: Mobility Voice Access, RD: Remote Destination, RDP: Remote Destination Profile © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -15

Cisco Unified Mobility Configuration © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2

Cisco Unified Mobility—Mobile Connect Configuration Procedure Configure Mobile Connect: 1. Add mobility softkey to IP phone softkey templates. 2. Configure end user. 3. Configure IP phone. 4. Configure remote destination profile with shared line. 5. Configure remote destination(s) to remote destination profile. 6. Configure service parameters. 7. Optional: Implement access lists to specify which caller ID is allowed to ring a remote destination when a call to the office phone is received. a) Configure access lists. b) Apply access lists to remote destination. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -17

Step 1: Configure Softkey Template Device > Device Settings > Softkey Template Add the Mobility softkey to On Hook and to Connected call state. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -18

Step 2: Configure End User Management > End User Enable Mobile Connect for end user. Set maximum number of remote destinations for end user. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -19

Step 3: Configure IP Phone Device > Phone This line will be shared with remote destination profile. Assign softkey template. Set Owner User ID. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -20

Step 4: Configure Remote Destination Profile Device > Device Settings > Remote Destination Profile Click here and add line of office phone. After add, screen updates. CSS used for outgoing calls placed using MVA. CSS used for ringing remote destination(s) when receiving a call at the office phone. Note: Line is shared with office phone. Configured line CSS and partition apply to both devices: office phone and remote destination profile. Line CSS and device CSS are combined (partitions of line CSS considered first). © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -21

Step 5: Add Remote Destination(s) to Remote Destination Profile Device > Remote Destination Number of remote destination. Line(s) of remote destination profile are shown only after setting remote destination profile and clicking Save. Once saved, remote destination profile cannot be changed. © 2008 Cisco Systems, Inc. All rights reserved. Allows transfers of active calls from office phone to remote destination using the Mobility softkey. Associate remote destination with line(s) of remote destination profile. Allows calls placed to office phones to also ring the remote destination. CIPT 2 v 6. 0— 4 -22

Step 6: Configure Service Parameters System > Service Parameters If configured remote destination number does not match caller ID of remote phone (e. g. , because of 9 -1 prefix in remote destination number), change from Complete Match to Partial Match and set the number of digits that have to match. Otherwise, calls to internal devices are not shown with caller ID of office phone. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -23

Step 7 a: Configure Access List Device > Device Settings > Access List Enter name and description and select owner. Select type of ACL: Allowed (if checked) or Blocked (if unchecked) Click Add Member for initial configuration of an access list member. Click entry from list at bottom to change configuration of existing member. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -24

Step 7 b: Apply Access List to Remote Destination Device > Remote Destination Either allowed or blocked acess list can be set. If blocked access list is set, all numbers not listed in access list are allowed (and vice versa). © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -25

Cisco Unified Mobility—Mobile Voice Access Configuration Procedure Configure MVA: 1. Activate Cisco Unified Mobile Voice Access Service. 2. Configure service parameters: a) Enable MVA globally. b) Enable and configure enterprise feature access. 3. Enable MVA per end user. 4. Configure MVA media resource. 5. Configure MVA Voice. XML application at Cisco IOS gateway. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -26

Step 1: Activate Cisco Unified Mobile Voice Access Service Cisco Unified Serviceability > Tools

Step 2: Configure Service Parameters System > Service Parameters View default enterprise feature codes and change if required. Enable access to enterprise features. Enable MVA globally. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -28

Step 3: Enable MVA per End User Management > End User Enable MVA for

Step 4: Configure MVA Media Resources > Mobile Voice Access Enter number of MVA media resource. The H. 323 gateway running the MVA call application needs to have access to the partition of the MVA number (if set). At least one locale has to be selected for the MVA media resource. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -30

Step 5: Configure MVA at Cisco IOS Gateway application service mva http: //10. 1. 1. 1: 8080/ccmivr/pages/IVRMainpage. vxml ! voice-port 0/0/0: 23 translation-profile incoming pstn-in ! voice translation-profile pstn-in translate called 1 ! voice translation-rule 1 /. *5552(. . . $)/ /21/ dial-peer voice 1 pots ! destination-pattern 9 T dial-peer voice 29991 pots incoming called-number 2. . . service mva direct-inward-dial incoming called-number 2999 port 0/0/0: 23 direct-inward-dial ! ! dial-peer voice 2 voip dial-peer voice 29992 voip destination-pattern 2. . . destination-pattern 2999 session target ipv 4: 10. 1. 1. 1 incoming called-number 9 T dtmf-relay h 245 -alphanumeric codec g 771 ulaw codec g 711 ulaw no vad © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -31

Summary § Mobile Connect enables users to receive calls placed to their enterprise number at the enterprise phone and remote phones such as cell phones. Mobile Voice Access extends the Mobile Connect functionality by allowing enterprise calls placed from a remote phone to first connect to the enterprise and then break back out to the called number using the enterprise number of the user as the calling number. § Mobile Voice Access requires an H. 323 gateway providing an IVR application to Mobile Voice Access users. § The Cisco Unified Mobile Voice Access service must be activated in the Cisco Unified Communications Manager cluster for Mobile Voice Access. § Implementation of Cisco Unified Mobility includes the configuration of access lists, remote destination profile, and remote destinations. © 2008 Cisco Systems, Inc. All rights reserved. CIPT 2 v 6. 0— 4 -32