ICAO Dangerous Goods Inspectors Workshop GM 3 Inspectors

ICAO Dangerous Goods Inspector’s Workshop GM 3 - Inspector's Qualification and Training Slide 1 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training Topics of Chapter 03 • • 3. 1 Introduction 3. 2 Designated Inspector’s courses recommended 3. 3 On-the-Job Training (OJT) 3. 4 Inspector Conduct Slide 2 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training Topics of Chapter 03 3. 1 Introduction Slide 3 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training 3. 1 Introduction • • • 3. 1. 1 The inspector must be trained in every aspect of his / her duties as a technical inspector and regulatory officer. Each shipment of dangerous goods may represent a threat to life, health, property or the environment. Procedures and regulations attempt to minimize the danger during transport. Slide 4 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training 3. 1 Introduction Slide 5 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training 3. 1 Introduction Slide 6 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training 3. 1 Introduction • 3. 1. 2 This chapter sets out, as example, the training qualifications required by inspection personnel employed as an inspector. Slide 7 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training Topics of Chapter 03 3. 2 Designated Inspector’s courses recommended Slide 8 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training 3. 2 Designated Inspector’s courses recommended • 3. 2. 1 All employees occupying position with delegation of authority must be qualified and competent by receiving the training required to perform their duties. Slide 9 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training 3. 2 Designated Inspector’s courses recommended • 3. 2. 2 The following training topics are recommended: q ICAO Technical Instructions q National Regulations q Audit procedures q Investigation Procedures q Aviation Enforcement q Safe working procedures q Structured on the job training (OJT) Slide 10 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training 3. 2 Designated Inspector’s courses recommended • To ensure Full Competency as a Designated Inspector, the Inspector should also successfully complete training on the following topics listed below within a period of time deemed appropriate. q IATA Dangerous Goods Regulations q Communication skills q System Management Safety (SMS) Slide 11 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training 3. 2 Designated Inspector’s courses recommended • Other recommended specialized training topics: q Radioactive Materials q Radiation protection and Instrumentation q Dangerous Goods Sampling Course q Infectious Substances q Explosives q Cylinders Slide 12 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training Topics of Chapter 03 3. 3 On-the-Job Training (OJT) Slide 13 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training 3. 3 On-the-Job Training (OJT) • • 3. 3. 1 To properly document the training of each Inspector, an “on the job (OJT) training” syllabus, based on competency profiles, should be use for each position. An example of an on the job training checklist is found in APPENDIX “A” Slide 14 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training Appendix “A” On-the-job training checklist Slide 15 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training Appendix “A” On-the-job training checklist Slide 16 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training Appendix “A” On-the-job training checklist Slide 17 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training Appendix “A” On-the-job training checklist Slide 18 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training Appendix “A” On-the-job training checklist Slide 19 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training Topics of Chapter 03 3. 4 Inspector Conduct Slide 20 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training 3. 4 Inspector Conduct • • • 3. 4. 1 At all times, Inspectors must act in such a manner that speaks well of the Authority and its Inspectors. Each person, company official or company shall be dealt with in an equitable manner. Advice and guidance are frequently sought and must be readily given in such a manner that public safety and the Authority are not compromised. Slide 21 Revision 05 – March 2008

ICAO Dangerous Goods Inspector’s Workshop GM-03 – Guidance Manual – Chapter 3 - Inspector's Qualification and Training End of GM-03 Daniel J. Sylvestre Superintendent, Dangerous Goods TRANSPORT CANADA National Operations – Airlines Division Tel: 1 (514) 633 -3116 / Fax: 1 (514) 633 -3717 Email: sylvesd@tc. gc. ca Web: www. tc. gc. ca 700 Leigh Capreol, Suite 2093 (NAROA), Dorval, Quebec H 4 Y 1 G 7, CANADA Government of Canada Slide 22 Revision 05 – March 2008