Holes In Auto CAD COMMON HOLES IN MACHINED

Holes In Auto. CAD

COMMON HOLES IN MACHINED PARTS u COUNTERBORE • COUNTERSINK • DRILL/REAM

COUNTERBORE

COUNTERBORE - RIGHT & WRONG ON THE TOP VIEW SHOW BOTH DIAMETERS AS SOLID CIRCLES ON THE SIDE VIEW SHOW COUNTER BORE DEPTH - USE HIDDEN LINES

COUNTERSINK

COUNTERSINK - RIGHT & WRONG ON TOP VIEW- ON SIDE VIEW- SHOW BOTH DIAMETERS AS SOLID CIRCLES SHOW ANGLE & DEPTH OF COUNTERSINK

DRILL/REAM

THRU-HOLE - RIGHT & WRONG NOTE: USE CONTINUOUS LINETYPE IN TOP VIEW

BLIND DRILL -RIGHT & WRONG USE CONTINUOUS LINE TYPE ON TOP VIEW SHOW THE DEPTH OF THE HOLE IN SIDE VIEWUSE HIDDEN LINES

HOLE ANNOTATIONS ALWAYS USE HOLE DIAMETER - NEVER THE RADIUS!!!! ALWAYS NOTE IF IT IS BLIND OR THRU!!! ALWAYS NOTE DEPTH IF IT IS C’BORE OR BLIND ALWAYS NOTE ANGLE IF IT IS C’SUNK

THRU-HOLE ANNOTATIONS USE DIAMETER USE ‘THRU’ NOTE LEADER ARROWHEAD IS ON OUTER EDGE OF CIRCLE

BLIND HOLE ANNOTATIONS TO MAKE THE DEPTH SYMBOL SHOWN IN THE THIRD VIEW, USE THE SYMBOL DROPDOWN IN THE MTEXT DIALOG BOX.

COUNTERSINK ANNOTATIONS FOR THRU - NOTE DIAMETER OF THREAD, THRU DIAMETER OF C’SINK X ANGLE OF C’SINK FOR BLIND - NOTE DIAMETER OF THREAD, DIAMETER OF C’SINK X ANGLE OF C’SINK DEPTH

COUNTERBORE ANNOTATIONS FOR THRU - NOTE DIAMETER THRU DIAMETER C’BORE DEPTH OF C’BORE FOR BLIND - NOTE DIAMETER X DEPTH DIAMETER C’BORE DEPTH OF C’BORE

REPETITIVE HOLES A SPACE MUST BE USED BETWEEN THE X & THE DIMENSION

REPETITIVE HOLES PATTERNED THE SPACING BETWEEN THE HOLES IS INDICATED AS 4 X THE SPACING MUST BE DETERMINED BY DIVIDING THE DISTANCE BY THE NUMBER OF SPACES BETWEEN THE HOLES

SUMMARY THERE ARE THREE MAIN TYPES OF HOLES SHOWN IN FABRICATED PARTS - • DRILL • COUNTERSINK • COUNTERBORE

SUMMARY HOLES ARE SHOWN IN A SYMBOLIC RATHER THAN ‘TRUE’ MANNER.

SUMMARY HOLE NOTES FOLLOW AN ANSI STANDARD FOLLOW THE RULES!!!!