Heating Solution for ship ocean plant A Heating

  • Slides: 8
Download presentation
Heating Solution for ship & ocean plant

Heating Solution for ship & ocean plant

A. Heating Equipment 1) Electric Heater The electric heater operates in a manner that

A. Heating Equipment 1) Electric Heater The electric heater operates in a manner that the current passes through the resistor (element). Precise control of temperature is possible and can be heated at high temperatures with rapid response speeds They are also clean, quiet and do not emit much heat to the surrounding byproducts. Radiator Type Model AS series CS series BS series Capacity 0. 3 k. W ~ 2. 0 k. W 1. 5 k. W~5. 0 k. W Rated voltage 220 V~690 V Installation Wall Mounting CS series Fan Type Model FS series Capacity 5. 0 k. W~30. 0 k. W Rated voltage 220 V~690 V Installation Wall or Deck Mounting Motor 220~690 V AS series BS series

Duct Type Model DS series Capacity Order Power source 120 V~690 V Installation Duct

Duct Type Model DS series Capacity Order Power source 120 V~690 V Installation Duct Mounting 2) Steam & Thermal Oil Heater It uses the method of heating the outer surface by passing the heating medium through the tube. Depending on the type of heating medium, it is divided into Steam Heater and Thermal Oil Heater. Radiator Type Model FS-S(T) series Capacity Order Installation Wall or Deck Mounting Fan Type Model FS-S(T) series Capacity Order Rated voltage 220 V~690 V Installation Wall or Deck Mounting Motor 220~690 V

Duct Type Model DS-S(T) series Capacity Order Installation Duct Mounting 3) Explosion Proof Heater

Duct Type Model DS-S(T) series Capacity Order Installation Duct Mounting 3) Explosion Proof Heater Electrical heater for installation in explosion-proof areas. We are equipped with ATEX, / IECEX / KIMM Cert. Model ERB series Capacity 0. 5 k. W / 1. 0 k. W / 1. 5 k. W / 2. 0 k. W Rated voltage Max. 230 V Installation Wall Mounting, Deck Mounting Protection mode Ex db IIC T 3/T 4 IP grade IP 66

B. Outfitting Equipment 1) Louver It is a ventilation system that allows air to

B. Outfitting Equipment 1) Louver It is a ventilation system that allows air to pass through unwanted elements, such as water, dust and debris. The blades can be fixed to the frame or adjustable. Weather Louver Water Catcher (Moisture eliminator) Electric Heating Louver 사진 사진 사진 4) Damper is a valve or plate that stops or regulates airflow inside the air regulator. It can be used to block air in the room or control room temperature and climate control. Volume Control Damper 사진

5) Silencer prevents noise generated by exhaust gases, internal combustion engines, blowers and compressors.

5) Silencer prevents noise generated by exhaust gases, internal combustion engines, blowers and compressors.

C. Process Equipment 1) Immersion Heater It is a device to heat the heating

C. Process Equipment 1) Immersion Heater It is a device to heat the heating medium by tightening the vessel. Model IS series Capacity Order Rated voltage 220 V~690 V Installation Flange Mounting 2) Heating Vessel It is a vessel to heat the heating medium to the desired temperature.

D. Control Equipment 1) Panel Equipment intended to check for operation of various connected

D. Control Equipment 1) Panel Equipment intended to check for operation of various connected equipment (Heater, Damper, Fan) and to comply with field conditions 2) Explosion Proof Thermostat Equipment intended for measurement of ambient temperature when installed in explosion zone. We are equipped with ATEX, / IECEX / KIMM Cert. Model ERT series Installation Wall Mounting Protection mode Ex db IIC T 6 IP grade IP 66