Hazard Recognition and Risk Analysis upstreamagazine com Definitions

Hazard Recognition and Risk Analysis upstreamagazine. com

Definitions o The systematic observation and identification of unsafe conditions, at-risk behaviors and underlying management system weaknesses that if permitted to continue may lead to employee injury or illness. o Recognizing a condition or behavior that can cause harm Hazard Recognition and Risk Analysis

Hazard Recognition o Stimulate Safety Awareness o Intended to Change Employees Overall Work Behavior o Trigger Mechanism To Identify All Potential Hazards On A Job Prior To Beginning Work On That Job o Positive Intervention & Feedback Hazard Recognition and Risk Analysis

Hazard Recognition o Four Steps: • Select The Job • Break The Job Down into smaller tasks • Identify Hazards and Potential Accidents • Develop Solutions Hazard Recognition and Risk Analysis

Factors That Influence Our Decisions o Personal Factors n Experience (Positive/negative) n Knowledge/Skill n Age n Physical Ability o Organizational Factors n Safety System n Leadership Behaviors n Peer Behaviors o Situational Factors n Stress n Rushing n Control Hazard Recognition and Risk Analysis 5

Developing a Safe Solution or Plan o o o o Can I eliminate the hazard? Can I minimize the risks? Do I need help? Is there a better time to do the work? Do others need to be informed? What specific PPE and tools are required? What lock out or permit is needed? Is there a reliable method/procedure I need to review? Hazard Recognition and Risk Analysis 6

Review: Before and After o Prior to performing a task yourself n Recognize - What is involved in this job that can hurt me or my co-workers? n Reduce - How can I/we keep from being hurt while doing this job? o After performing a task each other n What was your assessment of the situation? n What risks you identified? n What were the identified controls? n What can be shared with others? n Share learnings at post outage meetings, team meetings, etc. Hazard Recognition and Risk Analysis 7

When you see a hazard… Take time to correct it. Hazard Recognition and Risk Analysis

What’s wrong with this photo? Hazard Recognition and Risk Analysis

o These workers are not protected from being struck by falling objects because they are working around/under other workers and not wearing hardhats. o The scaffold has no guardrails (required at a height of 10 feet or more, but recommended at a height of 6 feet or more) and the worker on the scaffold is not using any fall protection. o The scaffold does not have cross bracing on the ends. Hazard Recognition and Risk Analysis